2008 LEXUS RX400H reset

14
Pictorial indexInstrument panel
Headlight switch Turn signal lever Fog light switch P. 148
P. 136
P. 151
Power back door main switch ∗ P. 45
Tilt steering lock release lever ∗ P. 65
Tilt and telescopic steering control switch ∗ P. 66
Parking brake pedal P. 137
Tire pressure warning reset switch P. 332
Hood release lever P. 313
Gauges and meters P. 138
Audio remote control switches P. 231
Glove box P. 265
Tire pressure warning select switch P. 335
Engine (ignition) switch P. 131

30
1-1. Hybrid system
RX400h_U■
Consumption
Press .
Touch on the Information screen.
If the “Energy Monitor” screen is displayed, touch .
Regenerated energy in the past
30 minutes
One symbol indicates 50 Wh. Up
to 4 symbols are shown.
Fuel consumption in the past 30
minutes
Average fuel consumption
Outside temperature
Instantaneous fuel consumption
Cruising range
Hybrid warning message
A message is automatically displayed when a malfunction occurs in the
hybrid system or an improper operation is attempted. If a warning message is shown on
the multi-information display and
the navigation system screen (if
equipped), read the message and
follow the instructions. (→P. 398)
STEP1
STEP2
■Resetting the consumption data
Touching will reset the average fuel consumption.

55
1
1-4. Adjustable components (seats, mirrors, steering wheel)
Before driving
RX400h_U
Driving position memory (if equipped)
Your preferred driving position (the position of the driver's seat, steering
wheel and outside rear view mirrors) can be memorized and recalled with
the touch of a button.
Two different driving positions can be entered into memory.
■ Entering a position to memory
Check that the shift lever is set in P.
Turn the engine switch to the ON position.
Adjust the driver’s seat, steering wheel, and outside rear view
mirrors to the desired positions. While pushing the SET button,
push button 1 or 2 until the sig-
nal beeps.
If the selected button has
already been preset, the previ-
ously recorded position will be
overwritten.
■Recalling the memorized position
Check that the shift lever is set in P.
Turn the engine switch to the ON position. Push button 1 or 2 to recall the
memorized position.
STEP1
STEP2
STEP3
STEP1
STEP2

138
RX400h_U
2-2. Instrument cluster
Gauges and meters
The units used on the speedometer and the power meter gauge display may
differ depending on the model/type.

The following gauges and meters illuminate when the engine switch is
in the ON position.Power meter
Displays the instantaneous output from the hybrid system in approximate
kilowatts.
Speedometer
Displays the vehicle speed.
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Engine coolant temperature gauge
Displays the engine coolant temperature.
Multi-information display ( →P. 143)
Odometer/trip meter and trip meter reset button
Switches between odometer and trip meter displays. Pushing and holding
the button will reset the trip meter when the trip meter is being displayed.

143
2-2. Instrument cluster
2
When driving
RX400h_U
Multi-information display
The multi-information display presents the driver with a variety of driving
related data, including the status of the hybrid system.
●Odometer and trip meter
display
Odometer displays the total
distance the vehicle has been
driven.
Trip meter displays the dis-
tance the vehicle has been
driven since the meter was
last reset. Trip meters A and B
can be used to record and
display different distances
independently.
● Energy monitor (
→P. 2 8 )
Displays the status of the
hybrid system.
● Dynamic laser cruise control
display (if equipped)
(
→P. 1 6 0 )
Automatically displayed
when using dynamic laser
cruise control.
● Warning messages
(
→P. 398)
Automatically displayed
when a malfunction occurs in
one of the vehicle's systems.

147
2-2. Instrument cluster
2
When driving
RX400h_U■
Driving time
■ Average fuel consumption
■ Current fuel consumption
■ Driving distance Displays the elapsed time after the hybrid system
starts.
When the hybrid system is started, driving time is
counted from 0:00. Up to 11:59 (11 hours, 59 minutes)
can be displayed.
Displays the average fuel consumption since the
vehicle was last refueled.
Displays the current rate of fuel consumption.
Displays the driving distance since the hybrid system
was started.
The function can be reset by pushing the INFO switch
for longer than one second when the driving distance is
displayed.
CAUTION
■Caution while driving
Do not adjust the display while driving.
Doing so may cause the driver to mishandle the vehicle and an accident, resulting in
death or serious injury.

158
2-4. Using other driving systems
RX400h_U
■Fine adjustment of the set speed
Adjustment of the set speed by approximately 1.0 mph (1.6 km/h) cab be made by
lightly pressing the lever up or down and releasing it.
■Cruise control can be set when
●The shift lever is in the D.
●Vehicle speed is between approximately 25 mph (40 km/h) and 125 mph (200
km/h).
■Accelerating
The vehicle can be accelerated normally.
■Automatic cruise control cancellation
The set speed is automatically cancelled in any of the following situations.
●Actual vehicle speed falls more than 10 mph (16 km/h) below the preset vehicle
speed.
At this time, the memorized set speed is not retained.
●Actual vehicle speed is below 25 mph (40km/h).
●VSC is activated.
■Canceling and resuming regular acceleration
Cancel
Push the lever towards you to
cancel cruise control.
The speed setting is also can-
celed when the brakes are
applied.
Resume
To resume cruise control and
return to the set speed, push the
lever up.

160
2-4. Using other driving systems
RX400h_U
Dynamic laser cruise control (if equipped)
Dynamic laser cruise control supplements conventional cruise control
with a vehicle-to-vehicle distance co ntrol. In the vehicle-to-vehicle dis-
tance control mode, the vehicle automatically accelerates or decelerates
in order to maintain a set following distance from vehicles ahead.
■ Select cruise mode
Selecting vehicle-to-vehicle dis-
tance control modeTurn the ON-OFF button
ON.
Push the button once more to
deactivate.
Selecting conventional con-
stant speed control mode Turn the ON-OFF button
ON.
Push the button once more to
deactivate.
Vehicle-to-vehicle distance con-
trol mode is always reset when
the engine switch is turned to
the ON position.
Switch to constant speed
control mode.
(push and hold for approxi-
mately one second)