2008 LEXUS RX400H key

85
1
1-7. Theft deterrent system
Before driving
RX400h_U
Alarm
The system sounds the alarm and flashes lights when forcible entry is
detected.
■Triggered of the alarm
The alarm is triggered in the following situations.
●A locked door is unlocked or opened in any way other than using
the key or wireless remote co ntrol with the alarm being set.
● The hood is opened with the alarm being set.
■ Setting the alarm system
Close the doors, hood, and lock
all doors using the key or wire-
less remote door lock function.
The system will be set automati-
cally after 30 seconds.
The indicator light changes from
being on to flashing when the
system is set.
■ Deactivating or stopping the alarm
Do one of the following to deactivate or stop the alarm.
●Unlock the doors using the key or wireless remote control.
● Turn the engine switch to the ON position. (The alarm will be
deactivated or stopped after a few seconds.)

86
1-7. Theft deterrent system
RX400h_U
■Items to check before locking the vehicle
To prevent unexpected triggering of the alarm and vehicle theft, make sure of the
following.
●Nobody is in the vehicle.
●The windows and moon roof are closed before the alarm is set.
●No valuables or other personal items are left in the vehicle.
■Triggering of the alarm
The alarm may be triggered in the following situations.
Stopping the alarm deactivates the alarm system.
●The doors is unlocked using the key.
●A person inside the vehicle opens a door or hood.
●The battery is recharged or replaced when the vehicle is locked.
■Pa n ic m o d eVehicles with power back door
Vehicles without power back door
When PANIC is pushed for longer than
about one second, an alarm will sound for
about 30 seconds and the vehicle lights will
flash to deter any person from trying to break
into or damage your vehicle.
To stop the alarm, push any button on the
wireless remote control.

87
1-7. Theft deterrent system
1
Before driving
RX400h_U
■When the 12-volt battery is disconnected
Be sure to cancel the alarm system.
If the battery is discharged before canceling the alarm, the system may be triggered
when the battery is reconnected.
■When using the key to unlock the doors
Deactivate the alarm.
If the doors are unlocked using the key with the alarm operational, the alarm will be
triggered.

101
1-8. Safety information
1
Before driving
RX400h_U
CAUTION
■SRS airbag precautions
●If the vinyl cover is put on the area where the SRS knee airbag will deploys, be
sure to remove it.
●Do not use seat accessories which cover the parts where the SRS side airbags
inflate as they may interfere with inflation of the airbags.
●Do not strike or apply significant levels of force to the area of the SRS airbag
components shown on P. 92.
Doing so can cause the SRS airbags to malfunction.
●Do not touch any of the component parts immediately after the SRS airbags have
deployed (inflated) as they may be hot.
●Do not attach anything to or lean anything
against areas such as the dashboard, steer-
ing wheel pad or lower portion of the
instrument panel.
These items can become projectiles when
SRS driver, front passenger and knee
airbags deploy.
●Do not attach anything to areas such as the
door, windshield glass, side door glass,
front and rear pillars, roof side rail or assist
grip.
●Do not hang coat hangers or other hard
objects on the coat hooks. All of these
items could become projectiles and seri-
ously injure or kill you, should the SRS cur-
tain shield airbag deploy.
●Do not attach any heavy, sharp or hard
objects such as other keys or accessories
to the keychain. The objects may restrict
the SRS knee airbag inflation or be thrust
into the driver’s seat area by the force of the
deploying airbag, thus causing a danger.

122
RX400h_U
2-1. Driving procedures
Driving the vehicle
Starting on a steep uphillFirmly set the parking brake and shift the shift lever to D.
Gently depress the accelerator pedal.
Release the parking brake.
The following procedures should be observed to ensure safe driving.
■Starting the hybrid system
→ P. 1 3 1
■ Driving
With the brake pedal depressed, shift the shift lever to D. (→P. 135)
Release the parking brake. (→ P. 1 3 7 )
Gradually release the brake pedal and gently push the accel-
erator pedal to accelerate the vehicle.
■ Stopping
With the shift lever in D, push the brake pedal.
If necessary, set the parking brake.
When the vehicle is stopped for an extended period of time, shift the
shift lever to P. (
→P. 1 3 5 )
■Parking the vehicle
With the shift lever in D, push the brake pedal.
Set the parking brake. (→ P. 1 3 7 )
Shift the shift lever to P. (→ P. 135)
Turn the engine switch to stop the hybrid system.
Lock the door, making sure that you have the key on your per-
son.
STEP1
STEP2
STEP3
STEP1
STEP2
STEP1
STEP2
STEP3
STEP4
STEP5
STEP1
STEP2
STEP3

131
2-1. Driving procedures
2
When driving
RX400h_U
Engine (ignition) switch
■Engine switch
LOCK
The hybrid system is off and
the steering wheel is locked
and the key can be removed
from the engine switch.
ACC
The hybrid system is off and
some electrical components
such as the audio system can
be used.
ON
The hybrid system is on and
all electrical components can
be used.
START
■ Starting the hybrid system
Check that the parking brake is set.
Turn off unnecessary lights and accessories.
Check that the shift lever is set in P.
Sit in the driver’s seat and firmly depress the brake pedal.
Turn the engine switch to the
START position.
After a few seconds, the
READY light will flash and come
on with a beep sound.
The vehicle can move when the
READY light is on, even if the
hybrid system is stopped.
As the hybrid system starts only with the transmission in the P position, put
the selector lever in P whenever starting the system.
STEP1
STEP2
STEP2STEP3
STEP3STEP4

132
2-1. Driving procedures
RX400h_U
■Turning the key from ACC to LOCK
■Steering lock release
■If the hybrid system does not start
The hybrid vehicle immobilizer system may not have been deactivated. (→P. 8 3 )
■If the 12-volt battery is disconnected or run down...
→P. 3 2 8
■If the READY light does not come on
If the READY light does not come on when you turn the engine switch with the shift
lever in P and the brake pedal pressed, contact your Lexus dealer immediately. Shift the shift lever to P.
Push in the key and turn to the
LOCK pos ition.
STEP1
STEP2
When starting the hybrid system, the engine
switch may seem stuck in the LOCK position.
To free it, turn the key while turning the steer-
ing wheel slightly in either direction.

133
2-1. Driving procedures
2
When driving
RX400h_U
■Starting the hybrid system using the flat keyPut the key case away when the indicator light goes out. This means the
hybrid vehicle immobilizer system has turned off.
Start the hybrid system within 60 seconds after the indicator light goes
off.
■When the ambient temperature is low
Such as during winter driving conditions, it may take time until the READY light
comes on.
■Sounds and vibrations spec ific to a hybrid vehicle
→ P. 2 6
■When the hybrid system is malfunctioning
→P. 3 9 8 Remove the flat key from its case. Insert the
key into the engine switch.
Bring the key case close to the engine switch
within 10 seconds as indicated by an arrow.
STEP1
STEP2
STEP3
STEP4