2008 Lexus IS F buttons

3
OverviewInstrument Panel
Paddle shift switch P.18
Headlight switch Turn signal lever Fog light switch P.29
P.22
P.30
Headlight cleaner switch P.29
Inside door lock buttons P.45
Fuel filler door opener P.47
Driving and seat position
memory switches
P.13
Door lock switches P.45
Power window switches P.46
Window lock switch P.46
Outside rear view
mirror switches
P.12
Trunk opener P.48
Hood release lever P.47
Parking brake pedal P.22
Satellite switches P.24
Tilt and telesc opic steering
control switch
P.12
Multi-information
display
P.23

Topic 2
Before Driving
13
Driving and Seat Position Memory System
■Setting memory positions
While holding down the “SET” button, press and
hold one of the memory buttons (“1”, “2”, or “3”)
until you hear a beep.
The current position of the seat, as well as the
position of the steering wheel and the outside
rear view mirrors (for the driver's seat only) is
recorded.
■Recalling memory positions
Press one of the memory buttons (“1”, “2”, or “3”).
■Linking driving position memory with door unlock operation
While holding down the desired memory button,
press and hold on the wireless remote control
until you hear a beep.
To prevent triggering of the alarm, open one of
the doors within 60 seconds after the beep is
heard.
Your preferred driving position (the position of the driver's seat, steering wheel and the
outside rear view mirrors) and front passenger seat position can be memorized and
recalled with the touch of a button.
Linking driving position memory to the door unlock operation allows the memory position
to be recalled automatically when the driver's door is opened. (The linked function does not
operate if the driver's door is unlocked using the mechanical key or manually from inside
the vehicle.)

Topic 5
Driving Comfort
33
Audio System (without navigation system)
Owners of models equipped with a navigation system should refer to the “Navigation System
Owner's Manual”.
■Basic operation
Sound quality modes
Listening position (if equipped)
Automatic Sound Levelizer (ASL)
Audio sources
Po w e r/ Vo l u m e
■Audio sources
“A MSAT”: AM radio/Satellite Radio*
“FM”: FM radio
“DISC
AUX”: CD player/Auxiliary audio device
*:
The optional Lexus genuine satellite tuner and antenna allows you to receive and play
XM® Satellite Radio broadcasts. (Subscription is required. For detailed information,
see the Owner’s Manual.)
■Radio
Traffic information
Station presets
Te x t m e s s a g e s
Radio tuner
RDS genre select
Scan
All radio stations: press
Preset radio stations: press and hold
Seek
■Entering station presets
Select the desired station by using the tune, seek or scan function.
Press and hold one of the preset buttons (1-6) until you hear a beep indicating that the
station is set.
1
2
3
4
5
1
2
3
4
5
6
7

Topic 5
Driving Comfort
36
Entering and Exiting
When Driving
Rain and
Night Driving
Driving ComfortDriving Comfort
Opening and Closing
What to do if ...
Customizing
Yo u r L e x u s
Before Driving
Air Conditioning System (without navigation system)
Owners of models equipped with a navigation system should refer to the “Navigation System
Owner's Manual”.
■Using the automatic mode
Press the “AUTO” button.
Adjust the temperature using the “TEMP” but-
tons.
■Adjusting the temperature in dual mode
In dual mode, driver and passenger side tempera-
ture settings can be adjusted separately.
Press the “DUAL” switch.
Adjust the driver side temperature using the
“TEMP” buttons, and the passenger side temper-
ature using the “PASSENGER TEMP” buttons.
Driver side temperature control
Switch to automatic mode
Driver side temperature display
Off button
Fan speed controls
Air flow controls
Passenger side temperature displayMicro dust and pollen filter button
Passenger side temperature control
Windshield defog/defrost
Outside air/recirculated air mode switch
Air conditioning switch
Dual mode switch1
2
3
4
5
6
7
8
9
10
11
12
13

Topic 5
Driving Comfort
37
Garage Door Opener
The garage door opener (HomeLink Universal Transceiver) is manufactured under license
from HomeLink.
The HomeLink compatible transceiver in your
vehicle has 3 buttons which can be programmed
to operate 3 different devices.
■Programming HomeLink
Hold your hand-held transmitter within 3
inches of the HomeLink buttons.
Press and hold down the desired HomeLink
button.
For U.S.A. owners:
While pressing the HomeLink
 button,
press and hold down the button on the hand-
held transmitter until the indicator light
changes from a slow to a rapid flash.
For Canadian owners:
While pressing the HomeLink
 button,
repeatedly press and release (cycle) the but-
ton on the hand-held transmitter every 2
seconds until the indicator light changes
from a slow to a rapid flash.
If your garage door has the rolling code feature:
Press the training button on the motor-head unit
in your garage.
Press and release the programmed
HomeLink
 button twice. The garage door
may open.
If the door does not open, press and release
the same button once again.
The garage door opener can be programmed to operate garage doors, gates, entry
doors, door locks, home lighting systems, security systems, and other devices.