2008 HUMMER H3 low beam

[x] Cancel search: low beam

Page 305 of 416

HUMMER H3 2008  Owners Manual To adjust the vertical aim:
1. Open the hood. SeeHood Release on page 5-11
for more information.
2. Find the aim dot on the lens of the headlamp.3. Record the distance from the ground to the aim dot
o

Page 306 of 416

HUMMER H3 2008  Owners Manual 7. Locate the vertical headlamp aiming screws, which
are under the hood near each headlamp assembly.
The adjustment screw can be turned with an E8
Torx
®socket or T15 Torx®screwdriver.8. Turn the ve

Page 310 of 416

HUMMER H3 2008  Owners Manual 3. Pull the license plate lamp away from the fascia.
4. Turn the bulb socket counterclockwise and pull the
bulb straight out of the license plate lamp assembly.
5. Install the new bulb into the socket

Page 363 of 416

HUMMER H3 2008  Owners Manual Fuse Usage
7 Regulated Voltage Control Power
8 Power Locks
9 Sunroof, Front Washer Pump
10 Accessories (SPO)
11 Air Compressor
12 Transfer Case Control Module
13Radio, Heating, Ventilation, Air
Condit

Page 364 of 416

HUMMER H3 2008  Owners Manual Fuse Usage
52 StabiliTrak®, Antilock Brakes
53 Power Heater Switch
54 Stop
55 Trailer Parking Lamps
56 Front Turn Signal, Hazard Signal
57 Power Sunroof
58Transfer Case Control Module
Switch
59 Clima

Page 408 of 416

HUMMER H3 2008  Owners Manual H
Hazard Warning Flashers................................... 3-6
Head Restraints............................................... 1-7
Headlamp
Aiming.....................................................

Page 409 of 416

HUMMER H3 2008  Owners Manual L
Labeling, Tire Sidewall.....................................5-55
Lamps
Dome........................................................3-19
Dome Lamp Override...................................3-20
Off-
Page:   < prev 1-8 9-16