2008 HONDA ODYSSEY ECO mode

[x] Cancel search: ECO mode

Page 159 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual Unlocks the driver’s door or all doorsand tailgate when the ignition switch ismoved out of the ON (II) position.
all doors and tailgate
unlock f eature driver’s door unlock
feature.
Make sure the

Page 161 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual The tailgate can be opened and
closed with the remote transmitter
or the switch on the dashboard when
both f ront doors are unlocked.The tailgate can also be closed by
pressing the button on the tailg

Page 169 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual If the battery is disconnected or goes
dead, close the sliding door
completely by hand. If it still does
not operate properly af ter the
battery is reconnected, have your
vehicle checked by a dealer.

Page 170 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual There are bucket seats with
armrests for two front passengers,
bucket seats with armrests for two
passengers in the second row, and a
bench seat f or three passengers in
the third row.
For greater car

Page 171 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual µ
See pages f or important saf ety
inf ormation and warnings about how toproperly position the seats and seat-backs. 1312
The EX-L and Touring models have
a power adjustable driver’s seat and
f ro

Page 174 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual They are most ef f ective when you
adjust them so the center of the back
of the occupant’s head rests against
the center of the restraint.
Theangleof thearmrestoneach
f ront seat is adjustable. Pivo

Page 181 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual To reinstall the seat, hook the f ront
of the seat to the f loor, then push the
rear of the seat-back until it locks in
place. Make sure the seat is securely
latched bef ore driving.
Unlock the seat f

Page 187 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual Store a driver’s seat position only
when the vehicle is parked.Turn the ignition switch to the ON
(II) position. You cannot add a
new seat position in memory
unless the ignition switch is in the
ON