2008 HONDA ODYSSEY tailgate

[x] Cancel search: tailgate

Page 148 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual µµ
µ Press this button once
to unlock the driver’s door. Press it
twice to unlock the other doors and
the tailgate. Some exterior lights will
f lash twice each time you press the
button. If yo

Page 149 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual ´
If it takes several pushes on the
button to lock or unlock the doors
and the tailgate, replace the battery
as soon as possible.
Battery type: CR1616
To replace the battery: Remove the screw at the

Page 150 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual µµ
µ Press this button once
to unlock the driver’s door. Press it
twice to unlock the other doors and
the tailgate. Some exterior lights will
f lash twice each time you press the
button.
If yo

Page 151 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual If the power sliding door MAIN
switch on the dashboard is in the
OFF position, you cannot open or
close the sliding doors with the
remote transmitter.You can open or close the power
tailgate with the

Page 153 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual ´
If it takes several pushes on the
button to lock or unlock the doors
and the tailgate, replace the battery
as soon as possible.
Battery type: CR2025 To replace the battery, separate the
half s by

Page 154 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual To lock the doors and the tailgate,
press the f ront of the master door
lock switch on either f ront door,
pressthelocktabonthedriver’s
door, or use the outside lock on the
driver’s door.
Pressing

Page 155 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual Make sure the shif t lever is in the
Park (P) position.
Turn the ignition switch to the ON
(II) position, and open the driver’s
door.
The auto door locking f eature has
three possible settings:
Your

Page 156 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual Locks all doors and tailgate when theshif t lever is moved out of the Park (P)position.
Make sure the shif t lever is in the
Park (P) position. Release the switch, and within 5
seconds, turn the ignit