Page 135 of 420
Theclimatecontrolsystemhastwo 
sensors. A sunlight sensor is in the
top of the dashboard, and a 
temperature sensor is next to the 
steering column. Do not cover the
sensors or spill any liquid on them.
On models with climate control system
Sunlight Sensor/T emperature
Sensor
Climat e Cont rol Sensors
132
SUNLIGHT SENSORTEMPERATURE SENSOR
\f—\f—
y
y
)\f\f\fy\f
y
 2008  Accord  Sedan   
         
        
        
     
        
        Page 138 of 420

µ
µ µ
The ignition switch must be in the 
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
power/volume knob or the AM or 
FM button. Adjust the volume by
turning the power/volume knob. 
The band and f requency that the 
radio was last tuned to is displayed.
To change bands, press the AM or
FM button. On the FM band, ST will
be displayed if the station is broad-
castinginstereo.Stereo
reproduction on AM is not available. 
On the AM band, AM noise 
reduction turns on automatically. You can use any of f ive methods to 
f ind radio stations on the selected
band: tune, skip, scan, the preset
buttons, and auto select. 
On the FM band, you can also use 
the f eatures provided by the radio
data system (RDS). For more
inf ormation on the RDS, see page
.
Use the TUNE knob to
tune the radio to a desired f requency.
Turn the knob to the right to tune to
a higher f requency, and turn it to the
lef t to tune to a lower f requency.
The skip f unction searches
up and down f rom the current
f requency to f ind a station with a 
strong signal. To activate it, press
either of the SKIP buttons ( or
), then release it. The scan f unction samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display. 
The system will scan f or a station
with a strong signal. When it f inds
one, it will stop and play that station
f or about 10 seconds. 
If you do nothing, the system will 
then scan f or the next strong station
and play it f or 10 seconds. When it
plays a station you want to listen to,
press the SCAN button again.
137
CONT INUED
To Select a Station
To Play the FM/AM Radio
TUNE 
SK IPSCAN
Playing the FM/AM Radio (LX model)
Features
135
\f—\f—
y
\f
y
)\f\f\fy\f
\fy
 2008  Accord  Sedan   
         
        
        
     
        
        Page 139 of 420

µ
µ
µ If you are
traveling far from home and can no 
longer receive your preset stations, 
you can use the auto select feature to 
find stations in the local area. If you do not like the stations auto
select has stored, you can store
other f requencies on the preset 
buttons as previously described.
Each preset button can
store one f requency on AM and two 
f requencies on FM.
Select the desired band, AM or
FM. FM1 and FM2 let you store
two f requencies with each preset
button. 
Repeat steps 1 through 3 to store a 
total of six stations on AM and
twelve stations on FM. 
Pick a preset button (1 6), and 
hold it until you hear a beep. 
Usethetune,skip,scan,orRDS 
function to tune the radio to a
desired station. Press the A. SEL button. You will see 
A. SEL f lashing in the display, and
the system goes into scan mode f or 
several seconds. It stores the
f requencies of six AM, and twelve
FM stations in the preset buttons. 
You will see a ‘‘0’’ displayed af ter 
pressing a preset button if auto
select cannot f ind a strong station f or
every preset button. ,pressthe
A. SEL (auto select) button. This 
restores the presets you originally 
set. 
For inf ormation on FM/AM radio 
f requencies and reception, see page
.
1. 
2. 
3. 
4.
209
To turn of f auto select
AUTO SELECT
Preset
Playing the FM/AM Radio (LX model)
136
\f—\f—
y
\fy
)\f\f\fy\f
y
 2008  Accord  Sedan   
         
        
        
     
        
        Page 141 of 420

ÛÝ
On the FM band selected, you can 
select the program category 
provided by the RDS. Press either
side of the FOLDER bar ( or )
to display and select an RDS
category. The principal RDS
categories are shown as follows; 
ALL: All RDS category stations 
ROCK: Rock, classic rock and sof t
rock music SOFT: Adult hits and sof t music 
TOP 40: Top 40 of hits
OLDIES: Nostalgia music and oldies
R & B: Rhythm and blues, and sof t
rhythm and blues 
Press either side of the FOLDER bar 
to select an RDS category. The
displayshowstheselectedRDS
category name f or about 10 seconds.
You can use the search or scan
function to find radio stations on the
selected RDS category. If you do
nothing while the RDS category
name is displayed, the selected
category is cancelled. 
TRAFFIC: Traffic information 
INFO: News, inf ormation, sport, talk, 
f oreign language, personality, public,
college, and weather 
JAZZ: Jazz 
CLASSIC: Classical music 
RELIGION: Religion music and 
religion talk
This f unction searches up and down
a f requency f or the strongest signal
f rom the f requencies that carry the
selected RDS category inf ormation.
This can help you to find a station in
your favorite category. To activate it,
press and release either of the SKIP
buttons ( or ). You will see
the selected RDS category name 
blinking while searching it. When
the system finds a station, the
selected RDS category name will be
displayed again for about 5 seconds. 
If the system does not find a station, 
‘‘NOTHING’’ will be blinking f or
about 5 seconds, then the system
goes back to the last selected station.
COUNTRY: Country music
Playing the FM/AM Radio (LX model)
Radio Data System (RDS) Category RDS Program Search
138
RDS CATEGORY
\f—\f—
y
y
)\f\f\fy\f
y
 2008  Accord  Sedan   
         
        
        
     
        
        Page 142 of 420

The scan f unction samples all 
stations with strong signals on the
selected RDS category. To activate it, 
press and release the SCAN button. 
You will see SCAN in the display.
The system will scan f or a station
with a strong signal in the selected
RDS category. You will also see the 
selected RDS category name
blinking while searching it. When it
f inds one, it will stop and play that
station f or about 10 seconds. 
If you do nothing, the system will 
scan f or the next strong station and
play it f or 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again. 
If the system does not find a station, 
‘‘NOTHING’’ will be blinking f or
about 5 seconds, then the system
goes back to the last selected station.You can use the RDS program 
search or scan f unction even if the
PS name display f unction is of f . In 
this case, the display shows a 
f requency in place of a PS name.
Playing the FM/AM Radio (LX model)
RDS Program SCAN
Features
139
\f—\f—
y
y
)\f\f\fy\f
y
 2008  Accord  Sedan   
         
        
        
     
        
        Page 143 of 420

µ
µ µ
µ
µ Adjusts the volume level
basedonthevehiclespeed.
Press the SOUND (TUNE) knob 
repeatedly to display the BASS, 
TREBLE, FADER, BALANCE, and 
SVC (speed-sensitive volume
compensation) settings. Eachmodeisshowninthedisplayas 
it changes. Turn the TUNE knob to 
adjust the setting to your liking.
You can use the instrument panel 
brightness control knob to adjust the
illumination of the audio system (see
page ). The audio system
illuminates when the parking lights
are on, even if the radio is turned of f . 
This f unction is set to MID as the 
def ault setting when the vehicle
leaves the factory.
The SVC has f our modes; SVC OFF, 
SVC LOW, SVC MID, and SVC
HIGH. Turn the TUNE knob to adjust the setting to your liking. If 
you f eel the sound is too loud,
choose low. If you f eel the sound is 
too quiet, choose high.
The SVC mode controls the volume
based on vehicle speed. The f aster
you go, the louder the audio volume
becomes. As you slow down, the
audio volume decreases. 
When the level reaches the center, 
you will see ‘‘C’’ in the display.
Adjusts the bass.
Adjusts the treble.
Adjusts the front-to-back
strength of the sound.
Adjusts the side-to-
side strength of the sound. The system will return to the audio
display about 10 seconds af ter you
stop adjusting a mode.72
Except SVC adjustment
Adjusting the Sound SVC
A udio System L ighting
BASS 
TREBLE
FADER 
BAL ANCE
Speed-sensit ive Volume
Compensat ion (SVC)
Playing the FM/AM Radio (LX model)
140
\f—\f—
y
y
)\f\f\fy\f
y
 2008  Accord  Sedan   
         
        
        
     
        
        Page 146 of 420

µ 
µ 
µ
µWith the f older name, you will see 
the FOLDER indicator in the display.
The TRACK indicator is shown with
the file or track name.
Insert a disc about half way into the 
disc slot. The drive will pull the disc
intherestof thewaytoplayit.You 
operate the disc player with the 
same controls used f or the radio.
The number of the current track is
showninthedisplay.Whenplayinga
disc in MP3 or WMA, the numbers
of the current f older and f ile are
shown. The system will continuously 
play a disc until you change modes. 
You cannot load and play 3-inch 
(8-cm)discsinthissystem.
The specif ications of the compatible 
WMA f ile are:
Bit rate:
32/40/48/64/80/96/128/160/192
kbps 
Maximum layers 
(including ROOT): 8 layers 
Compatible with variable bit rate 
and multi-session 
Sampling f requency: 
32/44.1/48 kHz
For inf ormation on how to handle
and protect compact discs, see page. You can see the album, artist, and 
track name in the display. If a disc is
recorded in MP3 or WMA, you can
see the f older and f ile name, and the
artist, album, and track tag. 
Each time you press the TITLE 
button, the display shows you the
text data on a disc, if the disc was 
recorded with text data.
206
CONT INUED
Playing a Disc (L X model)
T ext Data Display Function
To Load a Disc
Features
143
\f—\f—
y
\fy
)\f\f\fy\f
y
 2008  Accord  Sedan   
         
        
        
     
        
        Page 148 of 420

µ
Û Ý
µ µµ
In MP3 or WMA mode In MP3 or WMA mode
CONT INUED
To
select a dif f erent f older, press either 
side of the FOLDER bar to move to 
the beginning of the next f older. 
Press the side of the bar to skip to
the next f older, and the side of
the bar to skip to the beginning of
the previous f older.
To continuously replay
a track (f iles in MP3 or WMA mode), 
press and release the RPT side of
theRPT/RDMbar.YouwillseeRPT
in the display. Press and hold the
RPTsidefor2secondstoturnitoff. This feature,
when activated, replays all f iles on 
the selected f older in the order they 
are compressed. To activate folder 
repeat, press the RPT side of the
RPT/RDM bar twice. You will hear a
beep and see F-RPT in the display.
The system continuously replays the 
current f older. Press the RPT side of
the bar again to turn it off. Pressing
the RDM side of the bar, or selecting
a different folder with the FOLDER
bar also turns of f the repeat f eature. 
Each time you press and release the 
RPTsideof thebar,themode
changes f rom f ile repeat to f older
repeat, then to normal playing. This f eature plays the
tracks within a disc (the f iles in MP3 
or WMA mode) in random order. To 
activate random play, press and 
release the RDM side of the RPT/
RDM bar. In MP3 or WMA mode,
presstheRDMsideof thebar
repeatedly to select RDM (within a 
disc random play). You will see RDM
in the display. Press the RDM side of
the bar for 2 seconds to return to
normal play.
Playing a Disc (L X model)
FOLDER SELECTION 
REPEAT (TRACK/FILE 
REPEAT) FOL DER-REPEA T
RANDOM (Random within a 
disc)
Features
145
\f—\f—
y
y
)\f\f\fy\f
\fy
 2008  Accord  Sedan