2008 GMC CANYON tailgate

Congratulations on your purchase of a GMC Canyon. Please read this information and your Owner Manual
to ensure an outstanding ownership experience. Note that your vehicle may not include all the featuresdescribed in this booklet. Keep this booklet with your Owner Manual for easy reference.
DRIVER INFORMATION
Instrument Panel . . . . . . . . . . . . . .2
Instrument Panel Cluster . . . . . . .3
Driver Information Center . . . . . . .4
SAFETY & SECURITY
Safety Belts . . . . . . . . . . . . . . . . . .5
Child Comfort Guide . . . . . . . . . . .5Child Restraints (LATCH) . . . . . . .6
Automatic Door Locks . . . . . . . . .6
Rear Door Security Locks . . . . . .6
Passenger Airbag Status
Indicator . . . . . . . . . . . . . . . . . . . . .7
Content TheftDeterrent System .7
OnStar
® . . . . . . . . . . . . . . . . . . . . . .8
COMFORT
Power Seats . . . . . . . . . . . . . . . . . .8
Heated Seats . . . . . . . . . . . . . . . . .8
Manual/Power Lumbar . . . . . . . . .9
Preventing Window Fogging . . . .9
ENTERTAINMENT
Audio Systems . . . . . . . . . . . . . . .9
Radio Antenna . . . . . . . . . . . . . . .12
CONVENIENCE
Headlamp Controls . . . . . . . . . . .12
Automatic Headlamp System . . .13
Fog Lamps . . . . . . . . . . . . . . . . . .13
Cargo Lamps . . . . . . . . . . . . . . . .13
Dome Lamp Override . . . . . . . . .13
Rear Seat Folding Operation . . .14Flexible, Locking Tailgate . . . . . .14
Cargo TieDowns and
Bed Rails . . . . . . . . . . . . . . . . . . .15
TwoTier Loading and
Optional Bed Extender . . . . . . . .15
PERFORMANCE & MAINTENANCE
Starting Your Engine . . . . . . . . . .16
Resetting the Oil Life System . .16
Automatic Locking Differential .16
FourWheel Drive System . . . . . .16
Traction Control System . . . . . . .19
Tire Pressure Monitor . . . . . . . . .19
OWNER INFORMATION
Roadside Assistance . . . . . . . . .20
My GMLink . . . . . . . . . . . . . . . . . .20
Canyon 2008 A 4/3/07 12:36 PM Page 1

Getting to Know Your Canyon14
Rear Seat Folding Operation
(if equipped)
Fold down the forwardfacing rear
seat on Extended Cab models
• Pull down on the bottom of the seat
until it is in place.
Store the seat
• Push the entire seat up until it is flush
with the trim panel.
Note:To ensure that the hinges or
latches do not damage the safety belt orcause the belt buckle to rattle, fold andstore the belt between the seat cushion
and seatback using the Velcro attachments provided on the lower portion ofthe seat.
Fold the Crew Cab’s rear seatbacks
forward
1. Insert a smalltipped tool into the slot
to unlatch the center safety belt buckle and move the belt to the side,
out of the way.
2. Grasp the loop located on the side of
the seatback (A) and pull it until youhear a click.
A
Flexible, Locking Tailgate
The tailgate features a flexible design
that allows it to be positioned fully up,fully down, partially lowered, or to be
removed entirely.
Partially lower the tailgate
1. From its fully down position, raise the
tailgate high enough to slide theretaining cable bracket forward and off
the bottom bolt.
2.While still holding the tailgate, raise it
slightly in order to place the cable
bracket’s
lowerhole onto the topbolt.
Note: The rear seat storage compart
ments must be in the rearward positionbefore folding the seat down.
3. Fold the seatback down.
Repeat the process to fold the other
seatback.
Return the Crew Cab’s rear seatbacks
to the upright position
1.Lift the seatback up and push it into
place.
2. Reconnect the center safety belt latch
plate with the buckle.
3. Push and pull on the seatback to
ensure that it is secured.
Repeat these steps for the other seat
back as necessary.
See Section 1 of your Owner Manual.
Canyon 2008 A 4/3/07 12:36 PM Page 14

3. Slowly lower the tailgate to allow the
cable bracket to slide rearward intoposition.
Remove the tailgate
1. Raise the
tailgateslightly fromits fully downposition andremove bothretainingcables. Dothis by pulling upward on the clip andturning the bracket so that the endfaces the front.
2. Push forward so that the larger part
of the hole is over the bolt, and pullthe end over the bolt.
3. With the tailgate halfway down, pull
the tailgate toward you at the left sideand move it to the left to release theright side.
Reverse the process to reinstall the tail
gate, and ensure that it is secure.
Tailgate lock (if equipped)
The tailgate also includes a lock that
can be used when the tailgate is in anormal, upright position.
See Section 2 of your Owner Manual.
15
TwoTier Loading and
Optional Bed Extender
You can create an upper load platform
by positioning four 2x6 wooden planksacross the width of the pickup box.Insert the planks into the pickup boxdepressions (below), allowing for atleast a 3/4inch (2cm) bearing surfaceon each end of the plank.
Cargo bed depressions for twotier loading
Ensure that the uppertier load is
securely tied down, with its center ofgravity in a zone over the rear axle.
See Section 4 of your Owner Manual.
Cargo TieDowns and Bed Rails
To secure loads, use the cargo tiedown
loops inside the cargo bed area. If yourtruck is equipped with bed rails, do notattempt to use them to secure loads,
as they are for appearance only. Usingthe bed rails as a load anchor not onlycan damage them but may cause the
load to loosen, possibly causing injury.
See Section 4 of your Owner Manual.
Note:An accessory bed extender,
available from your dealer, provideseven more flexibility for longer loads.
Note:The tailgate cannot be closed
in this position. The bracket must beanchored on the bottom bolt.
Canyon 2008 A 4/3/07 12:36 PM Page 15