2008 GEELY FC brake

Parking brake--Parking brake assembly
7. Disassemble parking brake shoe assembly (LH).
Use special tool to disassemble parking brake shoe, localiz-
ing spring, pin and brake exterior shoe.
8. Disassemble parking brake shoe assembly (LH).
(a) Use special tool to disassemble parking brake shoe, localiz-
ing spring, pin and brake inner shoe.
(b) Disassemble parking brake lever, then disassemble parking
brake inner shoe.
9. Check the thickness of friction plate of parking
brake shoe
Use ruler to measure the thickness of friction plate of shoe.
Standard thickness: 3.5mm
Maximal thickness: 1.0mm
10. Check whether the contact between brake drum and
friction plate of parking brake shoe is applicable.
Spread chalk on inner diameter of brake drum, then mesh it
with shoe friction plate. If the contact between brake shoe and
brake drum is not applicable, use brake drum to abrade and
repair shoe or change brake shoe assembly.
11. Disassemble lever of parking brake shoe (LH).
Use needle-nosed pliers to disassemble parking brake pull cable,
then disassemble lever of parking brake shoe.
12. Spread high temperature lubricating grease.
Spread high temperature lubricating grease on brake back
board of contacting part of shoe.
13. Assemble parking drag lever (LH).
Use needle-nosed pliers to connect parking brake pull cable to
lever of left parking brake shoe.
14. Assemble parking brake inner shoe assembly (LH).
(a) Spread high temperature lubricating grease on contacting
part between parking brake shoe and lever.
(b) Use special tool to assemble parking brake shoe with park-
ing shoe, localizing spring and pin.
Special
tool
Special
tool
 162 
Special tool

15. Assemble parking brake exterior shoe assembly
(LH).
Use special tool to assemble parking brake shoe with parking
shoe, localizing spring and pin.
16. Assemble parking brake shoe adjustor.
(a) Spread high temperature lubricating grease on adjusting
bolt.
(b) Assemble parking brake shoe adjustor.
(c) Use needle-nosed pliers to assemble return spring.
17. Assemble support lever of parking brake shoe (LH).
(a) Spread high temperature lubricating grease on contacting
surface between shoe support lever and tension spring.
(b) Assemble support lever of parking brake shoe.
(c) Use needle-nosed pliers to assemble upper two tension
springs.
Parking brake--Parking brake assembly
Special
tool
 163 

18. Check the assembly of parking brake system.
Check every part after assembly.
Note: do not attach oil dirt or lubricating grease on contacting surface between shoe friction
sheet and brake drum.
Parking brake--Parking brake assembly
19. Assemble the brake
20. Adjust the clearance of parking brake shoe.
(a) Lock screw cap of shaft hub temporarily.
(b) Disassemble hole plug, then use screw driver to turn the
adjustor until brake drum is locked by shoe.
(c) Return the adjustor for 8 gears.
(d) Check whether shoe has lag.
(e) Assemble hole plug.
21. Assemble rear disk type brake branch pump assem-
bly (LH).
22. Assemble rear wheels.
Torque: 103
± ±± ±
± 10N
⋅ ⋅⋅ ⋅
⋅m
23. Check the travel of parking brake drag lever.
24. Adjust the travel of parking brake drag lever.
Left
Right
Front
Front
Increase the
clearance
Decrease the
clearance
 164 

15. Disassemble central ventilation orifice assembly of panel [68010012].
16. Disassemble right storage box assembly of lower panel [68010008].
17. Disassemble inner trim board assembly of right front column [68010017].
18. Disassemble inner trim board assembly of left front column [68010014].
19. Disconnect the joint of safety airbag assembly at the side of passenger.
20. Disassemble upper panel assembly [6801004].
21. Disassemble upper/lower trim board of steering pipe [64000128/64000129].
22. Disassemble left combination switch assembly [67000078].
23. Disassemble right combination switch assembly [67000079].
24. Disassemble air spring assembly of right storage box [68000082].
25. Disassemble decoration panel assembly of shift organization [68000076].
26. Disassemble air conditioner control panel assembly [67000148].
27. Disassemble the assemble bracket of CD machine.
28. Disassemble ventilation pipe assembly of evaporator [67000149].
29. Disassemble air conditioner control assembly.
30. Disassemble parking brake lever hole cover.
31. Disassemble auxiliary panel assembly.
32. Disassemble step trim board of right front door [68010021].
33. Disassemble step trim board of left front door [68010020].
34. Disassemble lower inner trim board of right defender [68010016].
35. Disassemble lower inner trim board of left defender [68010015].
36. Disassemble central linking board of lower panel [68010006].
37. Disassemble lower panel assembly [68010005].
38. Disconnect steering column assembly [64000122].
(a) Disassemble three bolts.
(b) Disassemble steering column from panel framework body.
Air conditioner--Air conditioner central heating core assembly
 228 

Rear safety belt
Subassembly
Safety belt--Rear safety belt
1. Inner trim board assembly of left rear column
[68010026]
2. Inner trim board assembly of right rear column
[68010027]
3. Backrest assembly of rear row seat [68010076]
4. Step bolt M8*20 of hexagon flange face
[68000203]
5. Cushion assembly of rear row seat [68010074]6. Rear platform with sun blind assembly
[68010032]
7. Plastic clamp of column trim board [68000089]
8. Rear safety belt crimper assembly [68010048]
9. Middle waistband of rear row safety belt with
locker assembly[68010043]
10. High mount brake light assembly [67010008]
N.
m : Regulated torque
54
982 6 10
7 1
3
8
41
41
41
41
 275 

Safety belt--Rear safety belt
.
 : Regulated torque
1
13
12
2 3
5
8
78
56
4
10
11
9
1. Inner trim board assembly of left rear column
[68010026]
2. Inner trim board assembly of right rear column
[68010027]
3. Left backrest assembly of rear row seat
[68010078]
4. Right backrest assembly of rear row seat
[68010079]
5. Combination part of Hexagon head bolt and flat
washer M6*14 [Q1400614]
6. Backrest assembly of rear row seat [68010076]7. Step bolt of hexagon flange face [68000203]
8. Combination part of hexagon bolt with flat big
washer M10*1.25*22 [Q1401022]
9. Cushion assembly of rear row seat [68010074]
10. Rear safety belt crimper assembly [68010048]
11. Middle waistband of rear row safety belt with
locker assembly [68010043]
12. Rear shelf with sun shade assembly
[68010032]
13. High mount brake light [68010008]
41
41
41
41
41
 276 

Safety belt--Rear safety belt
Change
Hint:
zWhen assembling, please work by the sequence that is reverse with disassembling sequence,
if necessary, assembling instruction could be got.
zChanging procedure for left side and right side is same.
zRefer to subassembly drawing of front safety belt on page 275.
1. Disassemble cushion assembly of rear row seat.
2. Disassemble Right backrest assembly of rear row seat [68010079]
3. Disassemble left backrest assembly of rear row seat [68010078]
4. Disassemble cushion assembly of rear row seat [68010074]
5. Disassemble backrest assembly of rear row seat [68010076]
6. Disassemble high mount brake light assembly [68010008]
7. Disassemble inner trim board assembly of right rear column [68010027]
8. Disassemble inner trim board assembly of left rear column [68010026]
9. Disassemble rear platform with sun blind assembly [68010032]
(a) Use special disassembling tool to disassemble three fixed clamps.
(b) Pull out safety belt from the clearance, then disassemble rear platform with sun blind assembly.
10. Disassemble rear safety belt crimper assembly [68010048]
(a) Disassemble the bolts and safety belt clamps.
(b) Disassemble the bolts and rear safety belt crimper assembly.
11. Disassemble middle waistband of rear row safety belt with locker assembly. [68010043]
(a) Disassemble the bolts and middle waistband of rear row safety belt with locker assembly.
 277 

High brake light assembly
Change
1. Disassemble high brake light assembly [67010008]
(a) Loosen two fixed jaw just as drawing.
(b) Loosen two fixed jaw and disassemble high brake light
assembly as the drawing, then take the joint apart.
Light--High brake light assembly
 297 
Fixing claw