2008 FORD FUSION (AMERICAS) spare tire

3. Put the jack in the jack locator
next to the tire you are changing.
Turn the jack handle clockwise until
the wheel is completely off the
ground.
To lessen the risk of
personal injury, do not put
any part of your body under the
vehicle while changing a tire. Do
not start the engine when your
vehicle is on the jack. The jack is
only meant for changing the tire.
4. Remove the lug nuts with the lug
wrench.
5. Replace the flat tire with the
spare tire, making sure the valve
stem is facing outward. Reinstall lug
nuts until the wheel is snug against
the hub. Do not fully tighten the lug nuts until the wheel has been
lowered.
If you are using the temporary tire, the lug nut washers will not appear
to be flush with the rim. This is normal only when using the temporary
spare tire.
6. Lower the wheel by turning the jack handle counterclockwise.
7. Remove the jack and fully tighten
the lug nuts in the order shown.
Refer toWheel lug nut torque
specificationslater in this chapter
for the proper lug nut torque
specification.
8. Unblock the wheels.
1
4 3
2 5
2008 Fusion(fsn)
Owners Guide (post-2002-fmt)
USA(fus)
Roadside Emergencies
225

Stowing the wheel and jack
1. Fully collapse the jack and place it back in the storage area in the
trunk.
2. Replace the jack retention bolt to secure the jack.
3. Place the tire in the storage bin in the trunk.
4. Replace the cover plate and bolt.
•When storing a flat road tire, flip the cover plate over and use the long
bolt.
•When storing the temporary spare tire, replace the cover plate and
use the short bolt.
5. Secure the bolt using the lug wrench.
6. Insert the lug wrench and bolt in the tool bag and place over the jack.
7. Replace the carpeted load floor panel.
WHEEL LUG NUT TORQUE SPECIFICATIONS
Retighten the lug nuts to the specified torque at 500 miles (800 km)
after any wheel disturbance (tire rotation, changing a flat tire, wheel
removal, etc.).
Bolt size Wheel lug nut torque*
lb. ft. N•m
M12 x 1.5 100 135
* Torque specifications are for nut and bolt threads free of dirt and
rust. Use only Ford recommended replacement fasteners.
When a wheel is installed, always remove any corrosion, dirt or
foreign materials present on the mounting surfaces of the wheel
or the surface of the wheel hub, brake drum or brake disc that
contacts the wheel. Ensure that any fasteners that attach the rotor to
the hub are secured so they do not interfere with the mounting
surfaces of the wheel. Installing wheels without correct metal-to-metal
contact at the wheel mounting surfaces can cause the wheel nuts to
loosen and the wheel to come off while the vehicle is in motion,
resulting in loss of control.
2008 Fusion(fsn)
Owners Guide (post-2002-fmt)
USA(fus)
Roadside Emergencies
226

Tire Pressure Monitoring
System (TPMS)
Tires, Wheels and Loading ....177
Tires ...........................162–163, 221
alignment ................................170
care ..........................................166
changing ..................................221
checking the pressure ............166
inflating ...................................164
label .........................................176
replacing ..................................168
rotating ....................................170
safety practices .......................169
sidewall information ...............171
snow tires and chains ............181
spare tire .................................221
terminology .............................163
tire grades ...............................163
treadwear ........................162, 167
Towing .......................................186
recreational towing .................186
trailer towing ..........................186
wrecker ....................................232
Traction control ........................195
Transaxle
fluid, checking and adding
(automatic) .............................279
fluid, checking and adding
(manual) .................................284
Transmission .............................197brake-shift interlock (BSI) ....197
fluid, refill capacities ..............288
lubricant specifications ..........288
manual operation ....................202
Trunk .........................................100
remote release ..................92, 104
Turn signal ..................................58
U
USB port ......................................38
V
Vehicle Identification Number
(VIN) ..........................................292
Vehicle loading ..........................181
Ventilating your vehicle ...........191
W
Warning lights (see Lights) .......10
Washer fluid ..............................253
Water, Driving through .............211
Windows
power .........................................73
Windshield washer fluid and
wipers ..........................................69
checking and adding fluid .....253
replacing wiper blades ...........253
Wrecker towing .........................232
2008 Fusion(fsn)
Owners Guide (post-2002-fmt)
USA(fus)
Index
301