2008 FORD E SERIES bulb

[x] Cancel search: bulb

Page 43 of 280

FORD E SERIES 2008 4.G Owners Manual Aerodynamic
Sealed beam
3. Rotate the bulb socket counterclockwise and remove.
4. Carefully pull the bulb straight out of the socket.
To complete installation, follow the removal procedures in reverse

Page 44 of 280

FORD E SERIES 2008 4.G Owners Manual Sealed beam
3. Rotate the bulb socket counterclockwise and remove.
4. Carefully pull the bulb straight out of the socket.
To complete installation, follow the removal procedures in reverse order.
Repl

Page 45 of 280

FORD E SERIES 2008 4.G Owners Manual Replacing license plate lamp bulbs
1. Turn the headlamp switch to OFF
and then remove the two screws
and the license plate lamp assembly
from the rear door.
2. Remove bulb socket from lamp
assembly by

Page 255 of 280

FORD E SERIES 2008 4.G Owners Manual If theService engine soonindicator remains on, have your vehicle
serviced at the first available opportunity. Although some malfunctions
detected by the OBD-II may not have symptoms that are apparent,

Page 274 of 280

FORD E SERIES 2008 4.G Owners Manual A
Accessory delay ..........................52
AdvanceTrac ..............................168
Air cleaner filter ...............261–263
Airbag supplemental restraint
system ..........................

Page 276 of 280

FORD E SERIES 2008 4.G Owners Manual Exhaust fumes ..........................163
F
Fail safe cooling ........................243
Fluid capacities .........................264
Four-Wheel Drive vehicles
preparing to drive your
vehicle ....

Page 277 of 280

FORD E SERIES 2008 4.G Owners Manual positions of the ignition .........161
L
Lamps
bulb replacement
specifications chart ..................40
daytime running light ...............35
headlamps .................................34
headlamp
Page:   < prev 1-8 9-16