Downloaded from www.Manualslib.com manuals search engine Positive connection cableC
Negative connection cableD
1.Position the vehicles so that theydo not touch one another.
2.Switch off the engine and anyelectrical equipment.
3.Connect the positive (+) terminalof vehicle B with the positive (+)terminal of vehicle A (cable C).
4.Connect the negative (-) terminalof vehicle B to the groundconnection on the left-hand sidesuspension turret of vehicle A(cable D).
CAUTIONS
Do not connect to thenegative (–) terminal of theflat battery.
Make sure that the jump leadsare clear of any moving parts.
To start the engine
1.Run the engine of vehicle B atmoderately high speed.
2.Start the engine of vehicle A.
3.Run both vehicles for a minimumof three minutes beforedisconnecting the cables.
CAUTION
Do not switch on the headlampswhen disconnecting the cables.The peak voltage could blow thebulbs.
Disconnect the cables in the reverseorder.
CHANGING THE VEHICLE
BATTERY
Vehicles with a petrolengine
If the battery has been disconnectedthe vehicle may exhibit some unusualdriving characteristics forapproximately 8 km (5 miles) afterbattery reconnection while theengine management system realignsitself with the engine.
210
Vehicle battery
Downloaded from www.Manualslib.com manuals search engine 1.Remove the spare wheel.
2.Unscrew the retaining bolt byturning anti-clockwise andremove the jack with the wheelbrace.
1.After using the jack, turn thehandle until the arrow on the armpoints directly towards the dot inorder to attach the wheel braceto the jack.
2.Clip the wheel brace onto the jackhandle and fold the handle backagainst the jack as shown in thegraphic.
Jacking and lifting points
CAUTION
Use only the specified jackingpoints. If you use other positions,you may damage the body, steering,suspension, engine, braking systemor the fuel lines.
213
Wheels and tyresE78134 E78135
