2008 FORD C MAX Rear seats

Downloaded from www.Manualslib.com manuals search engine To return the seats to the forwardposition, pull the lever and slide theseats forwards. After releasing thelever, rock the seats to ensure thatthe catch is securely engaged.
To return the centre seat to itsoriginal position, pull the lever on theunderside of the seat. Fold the centreseat forwards and push it back downfully until it engages.
Fold the front of the luggage coverforwards.
WARNING
Do not slide the outboard seatsrearwards into the comfortposition if the centre seat is foldedforwards. There is a risk of injury inthe event of an accident or if thecentre seat falls back down.
Folding the seatbacksforward
WARNING
Do not fold the seatbacksforward when the seats are inthe comfort position (slid rearwards).This could result in damage to theseats or panel trim. Slide the seatsfully forwards.
All three seatbacks can be foldedforward independently of oneanother.
Remove the seat belts from the beltguides on the outboard seatbacks.The seat belt tongues must beinserted into the retaining slots. Theretaining slot for the centre seat beltis located in the roof. SeeFastening the seat belts (page31).
Lower the outboard head restraintsand raise the centre head restraint.
125
SeatsE78065 E78066

Downloaded from www.Manualslib.com manuals search engine Pull up the lever on the side of theseatback, fold the seatback forwardsand push it down until it engages.
WARNING
To avoid scalding, never placehot drinks in the cup holder.
A table surface and two cup holdersare located on the rear of the centreseatback.
Returning the seatbacks tothe upright position
WARNING
Always have the rear headrestraints raised when the rearseat is occupied by a passenger ora child restraint.
Pull the lever on the seatback and liftthe seatback up. The seatback mustengage in its latch.
Make sure the seatbelts will functionproperly and are positioned in frontof the seatbacks. When in use, therear seat belts should be placed inthe belt guides on the outboardseatbacks.
126
SeatsE78067 E78068

Downloaded from www.Manualslib.com manuals search engine Folding the seats forward
All vehicles
To increase the space in the luggagecompartment, the rear seats can befolded forward.
First, fold the seatback(s) forward.See Folding the seatbacksforward.
Note:All three seats can be foldedforward individually. However, if oneor both outboard seats is to befolded forward together with thecentre seat, the centre seat must befolded forward first. If only theoutboard seats are to be foldedforward, the centre seatback mustbe left in the upright position.
Pull the lower bar on the rear of theseats to release them from the floorand fold the seats forward.
There are two methods for securingthe seats in the upright positiondepending on the equipment fittedin your vehicle. Your vehicle is fittedwith either bungee straps on the rearof the seat cushions or seat supportslocated on the floor under the rearseats.
Vehicles with bungee straps
WARNING
Always attach the bungee strapto the front head restraint whena rear seat is folded forwards. Failureto do so may result in the seat fallingback down.
127
SeatsE78069 E78070 E78071

Downloaded from www.Manualslib.com manuals search engine Returning the seats to theseating position
All vehicles
WARNINGS
Make sure that no objects arelocated in the storagecompartments under the rear seatswhich could get damaged when theseats are folded down.
To avoid injury, take care whenfolding the seats down.
WARNINGS
Make sure that the locking holeon the floor is clear of sand, rockor any objects which may preventthe seat from locking.
Before folding the seats back down,pull the lower bar on the rear of eachseat and check that the latches arein the delatched (extended) position.
Note:If one or both outboard seatsare folded forward together with thecentre seat, the outboard seats mustbe folded back down first.
Vehicles with bungee straps
WARNING
When the bungee strap isdetatched from the headrestraint, it will recoil back into theseat. Take care not to get yourfingers caught when the strap recoils.
Detach the bungee straps.
129
SeatsE78073 E78074

Downloaded from www.Manualslib.com manuals search engine Vehicles with seat supports
Slide the supports into the larger holeon the base of the seats and detachthem. Fold the outboard seatsupports down and attach them tothe retainers on the floor. Detach thecentre seat support from the floorand secure it in its retainer on thefloor under the right-hand seat.
All vehicles
WARNING
Make sure the seat is securelylocked by pushing forward andrearward on the top of the seatbackor by trying to pull up the edge of thecushion.
Fold the seats back down until theyengage.
Raise the seatbacks ensuring thatthey engage in their latches.
Make sure the seatbelts will functionproperly and are positioned in frontof the seatback.
The rear seatbelts should be placedin the belt guides on the outboardseatbacks.
Removing the seats
To increase the space in the luggagecompartment, the rear seats can beremoved completely.
Fold the seats forward. See Foldingthe seats forward.
Fold up the seat to be removed toan angle of approximately 45degrees to the floor.
With the seat in this position, pushdown both levers marked in red torotate the locking claws to the openposition.
WARNING
The rear seats are heavy. Toavoid injury, take care whenlifting the seats.
130
SeatsE78075 E78076

Downloaded from www.Manualslib.com manuals search engine In order to remove the seats from theretaining bar on the floor, the seatshould be held at an angle ofapproximately 45 degrees to thefloor.
Lift the seats out.
Installing the seats
WARNINGS
Make sure that no objects arelocated in the storagecompartments under the rear seatswhich could get damaged when theseats are folded down.
To avoid injury, take care whenfolding the seats down.
Make sure that the locking holeon the floor is clear of sand, rockor any objects which may preventthe seat from locking.
Ensure that both locking claws arerotated to the open position.
To reinstall the seats, lower the seatonto the retaining bar on the floor. Inorder to do so, the seat should beheld at an angle of approximately 45degrees to the floor.
Before folding the seats back down,pull the lower bar on the rear of theseat and check that the latches arein the delatched (extended) position.
Push the seat back down until itengages.
131
SeatsE78077 E78073

Downloaded from www.Manualslib.com manuals search engine Rear seat centre console
The console can be used to storeitems and also serves as an armrest.It includes a small net in the lid and amoveable tray.
Installing the centre console
WARNING
Close the lid of the consolebefore installing it.
Fold up the rear centre seat. SeeRear seats (page 124).
Place the console onto the storagetray between the outboard seats 1and slide the guide arm at the rear ofthe console under the bar on the tray2.
136
Convenience featuresE72905E72905 E78101 E78102

Downloaded from www.Manualslib.com manuals search engine Push the console rearwards anddown at the front until it clicks intoposition 3. Slide the outboard seatsrearwards 4.
Removing the centre console
WARNING
Close the lid of the consolebefore removing it.
Press the locking handle under thefront of the console 5, pull theconsole up at the front edge and liftit out 6.
COOL BOX
For keeping cool pre-cooledfood/drinks. Press the switch to turnon or off. Operates only when theignition is switched on.
STORAGE
COMPARTMENTS
Front storage compartment
137
Convenience featuresE78103 E78104 E78162 E92189