2008 FIAT QUBO fuel

PERFORMANCE ..........................................................................15
TRANSMISSION ..........................................................................16
WEIGHTS.......................................................................................17
CAPACITIES...................................................................................18
FLUIDS AND LUBRICANTS ....................................................18
FUEL CONSUMPTION ..............................................................19
CO
2EMISSIONS ..........................................................................19
CONTENTS
READY TO START .......................................................................3
OPERATING MODE .....................................................................4
WARNING LIGHTS AND MESSAGES...................................10
TOWING THE CAR................................................................. 13
FUSE REPLACEMENT ................................................................13
SERVICE SCHEDULE...................................................................14
CHECKING FLUID LEVELS.......................................................14
ENGINE CODE - BODYWORK VERSIONS.........................15
604_39_872 DUALOGIC Fiorino Qubo GB 8-10-2008 15:59 Pagina 2

6
Automatic operation
(AUTO - ECO)
The ECOfunction can only be activated
with the automatic mode engaged.
The ECOfunction is turned on by press-
ing button E - fig. 4. After this function
has been activated, the display will show
the gear engaged and the words AUTO
and E(see next paragraph).
The ECOfunction activates the system
selecting the most suitable gear depend-
ing on the speed of the car, the engine
speed and the intensity with which the ac-
celerator is pressed with fuel economy be-
ing the main objective.
Where necessary (e.g. overtaking), the
system will react to the accelerator be-
ing pressed to the floor by shifting down
through one or more gears in order to de-
liver the power and torque required to
give the car the acceleration required by
the driver (all this takes place in automat-
ic mode, irrespective of whether the
ECOfunction is on or off). AUTOMATIC OPERATION
(AUTO)
To switch the automatic operation
(AUTO) on/off, push the lever to the
A/M fig. 3position; activation will be sig-
nalled by the display of the word AUTO
fig. 5 and the gear engaged.
In AUTOmode the system will change
gear depending on the speed of the car,
the engine speed and the intensity with
which the accelerator pedal is pressed. A
gear shift may be requested by operating
the gear lever, but without necessarily
switching this mode off: this function,
known as ‘gear suggestion’, suspends the
automatic mode for the time required to
select the ratio requested by the driver.INFORMATION ON DISPLAY
When the ignition key is turned to the
MARposition, after about 1 second, the
display shows the gear engaged and the
last mode used (AUTOor MANUAL):
N= neutral;
1= first gear;
2= second gear;
3= third gear;
4= fourth gear;
5= fifth gear;
6= sixth gear;
R= reverse.
fig. 5F0T0227m
604_39_872 DUALOGIC Fiorino Qubo GB 8-10-2008 15:59 Pagina 6

17
Versions N1
“Minimum”
(4 places)
1205
550
475
950
950
1755
600
400
50
60
Versions N1
“Maximum”
(4 places)
1300
455
–
950
950
1755
600
400
50
60
Versions M1
(4 posti)
1200
510
440
950
950
1710
600
400
50
60 1.3 Multijet
WEIGHTS
Weights (kg)
Unladen weight (with all fluids, fuel tank filled to 90% and without optional equipment)
Payload including the driver (*):
Payload excluding the driver (*):
Maximum permitted loads (**)
– front axle:
– rear axle:
– total:
Towable loads
– trailer with brakes:
– trailer without brakes:
Maximum load on roof
(with roof rack bars) (***):
Maximum load on tow hitch
(trailer with brakes):
NOTEVersions Adventure have the same payloads as the other versions.
(*)CATEGORY N1: the payload for full optional versions (110 Kg) is progressively reduced up to 500 kg.
CATEGORY M1: the options are included in the payload.
(**) Loads not to be exceeded. The driver is responsible for arranging the loads in the boot and/or in the load compartment so that they com-
ply with the maximum permitted limits.
(***) Including weight of any carrying systems fitted (Lineaccessori Fiat bars/container).
604_39_872 DUALOGIC Fiorino Qubo GB 8-10-2008 15:59 Pagina 17

18
1.3 Multijet
kg
0.43
0.040
CAPACITIES
Dualogic™gearboxhydraulic activation system
Clutch hydraulic operating system
litres
0.505
0.03Recommended fuels
Recommended products
TUTELA CAR CS SPEED
TUTELA TOP4
FLUIDS AND LUBRICANTS
RECOMMENDED PRODUCTS AND SPECIFICATIONS
Use
Lubricants
for transmission
of drive
Brake fluid
Specifications of fluids
and lubricants for the correct
operation of the car
Special fluid for electrohydraulic actuators
ratio selector
Qualification FIAT 9.55550-SA1
Synthetic fluid for braking and clutch systems
Exceeds specifications: FMVSS n° 116 DOT4,
ISO 4925, SAE J 1704
Qualification FIAT 9.55597Genuine
Fluide and Lubricants
TUTELA CAR
CS SPEED
Contractual Technical
Reference N° F005.F98
TUTELA TOP 4
Contractual Technical
Reference N° F001.A93Applications
Dualogic
™
electrically operated
electrohydraulic
actuator
Hydraulic brakes and
hydraulically operated
clutches
604_39_872 DUALOGIC Fiorino Qubo GB 8-10-2008 15:59 Pagina 18

19
FUEL CONSUMPTION
FUEL CONSUMPTION ACCORDING TO 2004/3/ECDIRECTIVE (litres x 100 km) Urban Extraurban Combined
1.3 Multijet5.7 3.8 4.5
The consumption figures in the table refer to the AUTO-ECO logic.
CO2EMISSIONS
The CO2emission refer to combined consumption.
CO
2EMISSIONS IN ACCORDANCE WITH 2004/3 EC DIRECTIVE
1.3 Multijet: 119 g/km
604_39_872 DUALOGIC Fiorino Qubo GB 8-10-2008 15:59 Pagina 19