Page 7 of 26

6
FIAT PANDA 4 x 4
❒make sure the space-saver spare wheel
supporting surfaces on the hub are
clean and free from any impurities that
could cause wheel bolts loosening;
❒fit the space-saver spare wheel match-
ing one of the wheel holes Owith pins
N-fig. 8;
❒fasten the four fastening bolts;
fig. 8F0G0204m
fig. 9F0G0206m
fig. 10F0G0615m
❒turn the jack handle to lower the car
and remove the jack;
❒fasten the bolts completely, working in
a criss-cross fashion as shown in fig. 9.
After changing the wheel
❒put the jack partly open and the tools
used into the tool bag;
❒stow the bag with tools into its place
under the driver’s seat.
IMPORTANT Replaced wheel shall be
placed in the boot under the cover mat as
shown in fig. 10.
IMPORTANT Do not use inner tubes
with tubeless tyres. Check tyre and space-
saver spare wheel pressure regularly.IMPORTANT Changing original wheels
with others of different type (i.e.: with al-
loy rim instead of steel rims and vice ver-
sa) will involve to change the whole set
of wheel bolts with others of suitable
length. It is however recommended to
keep replaced bolts in the event of future
refitting of the original wheels.
604.39.016 PANDA 4X4 GB 6-05-2008 13:22 Pagina 6
Page 17 of 26

Keep your speed down when
snow chains are fitted. Do
not exceed 50 km/h. Avoid potholes,
steps and pavements and avoid also
to drive for long distances on roads
not covered with snow to prevent
damaging the car and the roadbed.Snow chains shall only be fit-
ted to front wheels.
16
FIAT PANDA 4 x 4
SNOW CHAINS
Use of snow chains should be in compli-
ance with local regulations.
Tyre 185/65 R14 86T M+S cannot be fitted
with chains only for Fiat Panda 4 x 4 Climb-
ing versions whereas it can be fitted with
chains for Fiat Panda 4 x 4 CROSS versions.
Tyre 165/70 R14 81T M+S can be fitted
with chains. For tyres that can be fitted
with chains only use snow chains with re-
duced size (max. protrusion beyond the
tyre profile of 9 mm).
WARNING
It is recommended to use Lineaccessori
Fiat snow chains.
Check the tension of the chains after the
first few metres have been driven.
Tyre 175/65 R15 84T M+S, (that can be
fitted on Fiat Panda 4 x 4 CROSS upon re-
quest) cannot be fitted with chains.
Five forward gears and reverse with synchromesh
for forward gear engagement
Self-adjusting with no travel-free pedal
4 x 4 switched on automatically via the electronically controlled coupling and two differentials
rack and pinion with electric power steering (where provided)
9.610
STEERING
Fiat Panda 4 x 4 - Fiat Panda 4 x 4 Climbing Fiat Panda 4 x 4 CROSS
Type
Turning radius
(between pavements) m
TRANSMISSION
Gearbox
Clutch
Drive
604.39.016 PANDA 4X4 GB 6-05-2008 13:22 Pagina 16
Page 21 of 26

20
FIAT PANDA 4 x 4
1.2
30
4.5
–
–
4.6
2.5
2.8
–
–
2.7
0.6
0.55
4.51.3 Multijet
–
–
30
4.5
6.5
–
–
2.85
3.0
2.7
0.6
0.55
4.5
CAPACITIES
Fuel tank: litres
including a reserve of: litres
Fuel tank: litresincluding a reserve of: litres
Engine cooling system: litres
Engine sump: litres
Engine sump and filter: litres
Engine sump: litres
Engine sump and filter: litres
Gearbox/differential: litres
Rear differential: litres
Hydraulic brake circuit: kg
Windscreen/rear window and
headlight washer fluid reservoir litres
(*) For use in particularly harsh weather conditions SELENIA PERFORMER MULTIPOWERengine oil is recommended
(**) SAE 75W-85synthetic oil that passes API GL4 PLUS, MIL - L - 2105 D Lev specifications
(***) Synthetic oil SAE 75W-85. that passes API GL5, MIL - L - 2105 D Lev specificationsSpecified fuels
and recommended products
Unleaded premium petrol with no
less than 95 R.O.N
(EN 228 Specification)
Diesel fuel for motor vehicles
(EN 590 Specification)
Mixture of 50% water and 50%
PARAFLU UP
SELENIA 20K(*)
SELENIA WR
TUTELA CAR TECHNYX (**)
TUTELA CROSS 75W85(***)
TUTELA TOP 4
Mixture of water and
TUTELA PROFESSIONAL SC 35
604.39.016 PANDA 4X4 GB 6-05-2008 13:22 Pagina 20
Page 23 of 26

22
FIAT PANDA 4 x 4
FUEL CONSUMPTION
The fuel consumption figures given in the
table below are determined on the basis
of the homologation tests set down by
specific European Directives.
The procedures below are followed for
measuring consumption:
❒urban cycle: cold start and simulated
drive in city streets;
❒extra-urban cycle: frequent accelera-
tions in all gears, simulating extra-urban
use of the car; speed ranges from 0 to
120 km/h;
❒combined consumption: about 37% ur-
ban cycle and about 63% extra-urban
cycle.IMPORTANT The type of route, traffic
situations, weather conditions, driving
style, general conditions of the car, trim
level/equipment/accessories, load, climate
control system, roof rack, other situations
that affect air drag may lead to different
fuel consumption levels than those mea-
sured.
IMPORTANT To optimise fuel consump-
tion it is recommended to start with 2nd
gear when the engine is warm and you are
on a level road (after 3 or 4 min. from first
start-up).
Fiat Panda 4 x 4
Fiat Panda 4 x 4
Climbing
Fiat Panda 4 x 4
CROSS
Fuel consumption according to 1999/100/EC Directive (litres / 100 km)
Urban Extra-urban Combined
1.2 7.9 5.8 6.6
1.3 Multijet 6.7 4.2 5.2
1.2 7.9 5.8 6.6
1.3 Multijet 6.7 4.2 5.2
1.3 Multijet 6.7 4.2 5.2
604.39.016 PANDA 4X4 GB 6-05-2008 13:22 Pagina 22