5
MANUAL OPERATION
(MANUAL)
In this operating mode, the decision to
change gear is left to the driver who de-
cides the most appropriate moment.
To change gears in MANUAL operating
mode proceed as follows:
❒move lever to +(UP) to engage high-
er gear;
or
❒move lever to –(DOWN) to engage
lower gear.
The system will cut in automatically pre-
venting gearshifting only if the request to
change gear will impair regular engine and
transmission operation; the system will al-
so shift down gears automatically when
the engine (e.g.: at slowing down).
The system will warn the driver that the
required gear will not be engaged through
the sound of the buzzer and a dedicated
message on the reconfigurable multifunc-
tion display (see paragraph “Warning lights
and messages”).AUTOMATIC OPERATION
(AUTO)
For engaging/disengaging the automatic
operating mode (AUTO), move lever
A-fig. 1 to A/M: automatic mode activa-
tion is indicated by message AUTOand
gear engaged on the reconfigurable multi-
function display fig. 4.
fig. 4F0H1243g
With AUTOmode active, the system de-
cides to change gear depending on car
speed, engine rpm and how the accelera-
tor pedal is pressed. It is however possi-
ble to change gears with the control lever
without deactivating the automatic mode:
this function called “gear advice” suspends
the automatic mode for the time required
to change gear.
603.83.871 IDEA LOGIC 1a GB 17-01-2008 11:24 Pagina 5
