2008 FIAT DOBLO roof

72GETTING TO KNOW YOUR VEHICLE
REAR SIDE WINDOWS
The windows open outwards.
1)Move the lever as shown in fig.
103.
2)Push the lever outwards to open
the window completely.
3)Push the lever back until it clicks.
To close the windows, pull the lever
the opposite direction until it clicks.WING WINDOW
IMPORTANTOpen and close the
wing window only when the vehicle
is stationary.
The Fiat Doblò may fit a handy wing
window on the roof on the back of the
load compartment to carry long ob-
jects.
Opening the wing window
To open the wing window, pull lever
A-fig. 104downwards in the direc-
tion of the arrow.
Put your hand in handle B-fig. 105
and lead the wing window while it
opens.
fig. 103
F0A0067b
A
fig. 104
F0A0069b
fig. 102
F0A0408b
SIDE SLIDING WINDOW
(longitudinal sliding)
The windows slide open.
1)Keep pressed button A-fig. 102
to release the sliding window.
2)Push the window in the direction
of the arrow (1), to open as required.
3)To close, pull the sliding window
in the direction of the arrow (2) until
you hear it click.
001-105 Doblo GB 16-12-2008 14:22 Pagina 72

79GETTING TO KNOW YOUR VEHICLE
When using the boot,
make sure the load you
are carrying does not ex-
ceed the permitted weight (see
“Technical specifications”). Also
ensure the items in the boot are
arranged properly to prevent
them being thrown forwards and
injuring passengers should you
brake sharply. Do not travel with
the tailgate open: exhaust gas
could filter into the passenger
compartment.
If you are travelling in
areas where refuelling
can be difficult and you
want to carry a can of petrol, fol-
low the law in force. Use a ho-
mologated can and secure it ad-
equately. Even given these pre-
cautions, the risk of fire in the
event of an accident is increased.
Do not use the key as a
handle to open the tail-
gate. You could damage it.
TAILGATE
Opening/closing the tailgate
To open the tailgate from the out-
side, turn the ignition key in lock
fig. 118and pull handle Ain the di-
rection of the arrow.
The opening of the boot is made eas-
ier by the gas-filed struts on each side.
IMPORTANTFit the key well into
the lock before turning it.
You will be able to open the tailgate
with the key only if you remove the
key from the lock after turning it by 45
degrees.
To close, lower the tailgate until the
lock clicks.
CENTRAL DOOR LOCKING
SYSTEM
From the outside
With the doors closed, fit and turn
the key in one of the front door locks.IMPORTANTAdjust the height of
the dipped headlight beam when trav-
elling at night with a rather heavy load
in the boot (see “Headlights” in this
chapter).
Make sure the load does not exceed
the values shown in “Weights” para-
graph, “Technical specifications” chap-
ter for correct operation of the head-
light adjustment device.
Do not knock the tailgate
into objects on the roof
rack when you open it.
fig. 118
F0A0231b
001-105 Doblo GB 16-12-2008 14:22 Pagina 79

86GETTING TO KNOW YOUR VEHICLE
After travelling a few
kilometres, check that
the attachment fastening
screws are tight.
Distribute the load even-
ly and when driving, bear
in mind the increased
sensitivity of the vehicle to side
wind.
Never exceed the max.
permissible loads (see
section “Technical speci-
fications”).
Strictly comply with cur-
rent law regulations con-
cerning max. overall di-
mensions.
fig. 136
F0A0185b
ROOF RACK/SKI
RACK
PRESETTING
To use the roof racks you shall re-
move the caps set in points fig. 136.
Attach the roof rack bar brackets to
the fasteners.
IMPORTANTAlways follow the
instructions provided with the kit
carefully. The bars should be fitted by
skilled personnel.
For safety reasons the
bonnet must be closed
properly to avoid its
opening while the vehicle is trav-
elling. Therefore, always check it
is properly closed and the catch
engaged. Should you notice that
the catch is not perfectly engaged
when travelling, stop the vehicle
immediately and close the bon-
net. To close the bonnet
1)Hold the bonnet up with one hand
and, with the other, remove rod A-
fig. 135from recess Band replace it
in its clip.
2)Lower the bonnet until it is about
20 cm above the engine compartment,
and then let it drop, ensuring that it
is fully closed and not just held in po-
sition by the safety catch.
If the bonnet does not close properly
do not push it down but open it again
and repeat the above procedure.
001-105 Doblo GB 16-12-2008 14:22 Pagina 86

92GETTING TO KNOW YOUR VEHICLE
– in case of wedging under other ve-
hicles or protective barriers (for ex-
ample under a truck or guard rail), the
air bag is not triggered as it offers no
additional protection compared with
the seat belts, consequently it would
be pointless.
Therefore, failure to come into ac-
tion in the above circumstance does
not mean that the system is not work-
ing properly.At their maximum inflation, their vol-
ume fills most of the space between
the steering wheel and the driver and
between the dashboard and the pas-
senger.
In minor crashes (for which the re-
straining action of the seat belts is suf-
ficient), the air bags are not deployed.
Also in this case it is of vital impor-
tance to wear the seat belts since in
case of front crash they guarantee
proper positioning of the occupant.DRIVER’S FRONT AIR BAG
fig. 140
It consists of an instant-inflating cush-
ion contained in a special recess in the
centre of the steering wheel.
PASSENGER’S FRONT AIR
BAG fig. 141
It consists of an instant-inflating cush-
ion contained in a special recess in the
dashboard; its volume is bigger than
the driver’s one.
Do not apply stickers or
other objects to the
steering wheel or to the
air bag cover on the passenger’s
side or on the side roof lining.
Never put objects on the dash-
board on passenger side since
they could interfere with proper
air bag inflation.
The driver and passenger front
airbags have been designed and cali-
brated to protect a person wearing
seat belts.
fig. 140
F0A0711b
fig. 141
F0A0409b
001-105 Doblo GB 16-12-2008 14:22 Pagina 92

98GETTING TO KNOW YOUR VEHICLE
43 21
10987 65
fig. 146
F0A0099b
fig. 145
F0A0096B
CELLULAR PHONE
SET-UP
The system set-up consists of:
– a dual-purpose aerial (sound sys-
tem + cellular phone), on the vehicle
roof;
– a dual-purpose aerial connection
wires and ten-pin connector wiring
fig. 146.
– a double coil speaker (sound sys-
tem + cellular telephone), located on
the passenger side dashboard. HEAVY PRESETTING
The system consists of the following:
– sound system power wires;
– wires for front speakers on the
dashboard;
– 2 speakers on the dashboard;
– wires for door speakers (where
provided);
– 2 door speakers;
– 2 rear speakers (for passengers
transport versions);
– wires for rear speakers;
– sound system compartment;
– aerial wire and aerial.Speakers
– two mid-range speakers on dash-
board, diameter 100 mm, power 30W
max each.
– two woofer speakers on front
doors, diameter 165 mm, power 40W
max each (Panorama versions only).
– two full-range elliptic speakers on
rear window shelf, 95 x 154 mm, pow-
er 20W max each (Panorama versions
only).
Sound system installation
To fit the sound system, remove the
oddment compartment shown in fig.
145. To remove the compartment,
press it upwards and then pull it out
towards the inside of the vehicle.
fig. 144
F0A0162B
001-105 Doblo GB 16-12-2008 14:22 Pagina 98

100GETTING TO KNOW YOUR VEHICLE
RADIO TRANSMITTERS AND
CELLULAR TELEPHONES
Radio transceiver equipment (e.g.: e-
tacs mobile phones, HAM radio sys-
tems and the like) shall not be used in-
side the vehicle unless a separate aer-
ial is mounted on the roof.
IMPORTANTThe use of similar
devices inside the passenger compart-
ment (without separated aerial) pro-
duces radio-frequency electromag-
netic fields which, amplified by the res-
onance effects inside the passenger
compartment, may cause electrical
systems equipping the vehicle to mal-
function. This could compromise safe-
ty in addition to constituting a poten-
tial hazard for the passengers.
In addition, transmission and recep-
tion of these devices may be affected
by the shielding effect of the vehicle
body.
As concerns EC-approved mobile
phones (GSM, GPRS, UMTS), strictly
comply with the instructions for use
provided by the mobile phone’s man-
ufacturer.ACCESSORIES
PURCHASED BY THE
OWNER
If after buying the car, you decide to
install electrical accessories that re-
quire a permanent electric supply
(alarm, satellite antitheft system, etc.)
or accessories that in any case
burden the electric supply, contact
Fiat Dealership, whose qualified
personnel, besides suggesting the
most suitable devices belonging to
Lineaccessori Fiat, will also evalu-
ate the overall electric absorption,
checking whether the car’s electric sys-
tem is able to withstand the load re-
quired, or whether it needs to be in-
tegrated with a more powerful battery.
INSTALLATION OF
ELECTRIC/ ELECTRONIC
DEVICES
Electric/electronic devices installed
after buying the car or in aftermarket
shall bear the and marking:Fiat Auto S.p.A. authorizes the in-
stallation of transceivers provided that
installation is carried out at a special-
ized shop, workmanlike performed
and in compliance with manufacturer's
specifications.
IMPORTANTInstallation of de-
vices resulting in modifications of car
characteristics may cause driving li-
cense seizing by traffic agents and al-
so the lapse of the warranty as con-
cerns defects due to the abovemen-
tioned modification or traceable back
to it directly or indirectly.
Fiat Auto S.p.A.declines all re-
sponsibility for damages caused by the
installation of non-genuine accessories
or not recommended by Fiat Auto
S.p.A.and installed not in compliance
with the specified requirements.
001-105 Doblo GB 16-12-2008 14:22 Pagina 100

110DRIVING YOUR VEHICLE
Some suggestions which may help
you to keep the running costs of the
vehicle down and lower the amount
of toxic emissions released into the at-
mosphere are given below.
GENERAL
CONSIDERATIONS
Vehicle maintenance
The overall state of the vehicle is an
important factor which has a marked
influence over fuel consumption and
driving comfort and on the life span of
your vehicle. For this reason care
should be taken to maintain your ve-
hicle by carrying out the necessary
checks and regulations in accordance
with the specifications given in the
SERVICE SCHEDULE (see sections:
spark plugs, idling, air cleaners, diesel
fuel filter, timing).Tyres
Tyre pressure should be checked at
least once every four weeks: if the
pressure is too low fuel consumption
increases as the resistance to the
rolling movement of the tyre is
greater. In this state, tyre wear is in-
creased and handling suffers which will
effect safety.
Unnecessary loads
Do not travel with too much load in
the boot. The weight of the vehicle
and its trim greatly effects consump-
tion and stability.
Roof rack/ski rack
Remove the roof rack or the ski rack
from the roof as soon as they are no
longer used.
These accessories reduce the aero-
dynamic penetration of the vehicle and
will increase consumption. Whentransporting particularly large objects,
use a trailer, where possible.
Electric devices
Use electric devices for the neces-
sary time only. The heated rear win-
dow, fog lights, windscreen wipers,
heater fan require large amounts of
electricity and increasing the request
for power will also increase fuel con-
sumption (up to +25% when driving in
towns).
Climate control system
The climate control system is an ad-
ditional load which greatly effects the
engine leading to higher consumption
(up to +20% in average). When the
temperature outside allows, use the
air vents where possible.
Aerodynamic accessories
The use of non-certified aerodynamic
items may adversely affect air drag and
consumption levels.
CONTAINING RUNNING COSTS AND POLLUTION
106-118 Doblo GB 9-05-2008 12:09 Pagina 110

172VEHICLE MAINTENANCE
Detergents pollute wa-
ter. The vehicle must
therefore be washed in an
area equipped for the collection
and purification of the liquids
used while washing.
IMPORTANT The engine com-
partment should be washed while the
engine is cold and with the ignition key
at STOP. After washing, make sure
that the various protections (e.g. rub-
ber boots and various guards) have
not be removed or damaged. To wash the vehicle properly:
1) Remove the aerial from the roof
to prevent damaging it when washing
the vehicle in an automatic carwash.
2) Wash the body using a low pres-
sure jet of water.
3)Wipe a sponge with a slightly
soapy solution over the bodywork,
frequently rinsing the sponge.
4)Rinse well with water and dry
with a jet of air or a chamois leather.
When drying the vehicle, be careful
to get at those parts which are not so
easily seen e.g. the door frames, bon-
net and around the headlights where
water can most readily collect. You
should leave the vehicle out in the
open so that any water remaining can
evaporate more easily.Detergents pollute wa-
ter. For this reason, the
vehicle must be washed in
an area equipped for the collec-
tion and purification of the liquids
used while washing.
Engine compartment
At the end of each winter season,
carefully clean the engine compart-
ment. Be careful not to direct the jet
of water on the electronic control
units. Have this done at a garage. Do not wash the vehicle after it has
been parked in the sun or while the
bonnet is hot: it could take the shine
off the paint.
Outside plastic parts must be cleaned
following the usual vehicle washing
procedure.
Where possible avoid parking the ve-
hicle under trees; the resinous sub-
stances that certain species of tree
shed dull the paintwork and increase
the possibility of rust forming.
IMPORTANTBird droppings must
be washed off immediately and with
great care as their acid is particularly
aggressive.
Windows
Use specific window cleaner prod-
ucts to clean cloths to avoid scratch-
ing the glass or damaging the trans-
parency.
IMPORTANTTo prevent damage
to the electric heater element, wipe the
inside of the heated rear window gen-
tly in the same direction as the ele-
ments.
149-173 Doblo GB 9-05-2008 12:10 Pagina 172