2008 DODGE VIPER jump cable

[x] Cancel search: jump cable

Page 136 of 303

DODGE VIPER 2008 ZB II / 2.G Owners Manual If Engine Fails to Start
CAUTION!
To prevent damage to the starter, do not crank the
engine for more than 15 seconds at a time. Wait 10 to
15 seconds before trying again.
WARNING!
²Never pour fuel or

Page 187 of 303

DODGE VIPER 2008 ZB II / 2.G Owners Manual JUMP-STARTING PROCEDURES
WARNING!
²Take care to avoid the radiator cooling fans whenever the hood
is raised. They can start anytime the ignition switch is on. You
can be hurt by the fans.
²Take care

Page 188 of 303

DODGE VIPER 2008 ZB II / 2.G Owners Manual 5. Remove the plastic cover from the remote jump-start
positive post(+)in the engine compartment. Refer to the
following illustration for remote jump-starting connec-
tions.6.If you are jump-starting

Page 189 of 303

DODGE VIPER 2008 ZB II / 2.G Owners Manual WARNING!
²You should not try to start your vehicle by pushing
or towing.
²Do not connect the cable to the negative post of the
discharge battery. The resulting electrical spark
could cause the batte

Page 207 of 303

DODGE VIPER 2008 ZB II / 2.G Owners Manual NOTE:
²Because of the plastic body shell on your vehicle,
ignition cables should be replaced with the specially
designed RFI cables available at your dealer.
²The ignition timing cannot be set on th