2008 DODGE VIPER clock

Front Fog Light
1. Remove the push pin from the upper outer corner of
the splash shield and remove the splash shield.
2. Turn the bulb and socket assembly counter-clockwise,
and then pull it out of the front fog light assembly.3. Pull the bulb out of the socket assembly.
4. Push the replacement bulb into the socket assembly.
5. Reinstall the bulb and socket assembly into the front
fog light assembly, and then turn it clockwise.
6. Install the splash shield and push pin.
244 MAINTAINING YOUR VEHICLE

Taillight, Tail/Stop Light, Rear Marker Light
1. Open the trunk
2. Remove the two fasteners and then remove the access
panel.3. Turn the appropriate bulb and socket assembly
counter-clockwise, and then pull it out of the upper light
assembly.
4. Pull the bulb out of the socket assembly.
1 Ð Rear Marker Light
2 Ð Tail/Stop Light
3 Ð TaillightMAINTAINING YOUR VEHICLE 245
7

5. Push the replacement bulb into the socket assembly.
6. Reinstall the bulb and socket assembly into the upper
light assembly, and then turn it clockwise.
7. Install the access panel and the two fasteners.
8. Close the trunk.
Backup Light, Rear Turn Signal Light
1. Open the trunk.
2. Remove the two fasteners and then remove the access
panel.
246 MAINTAINING YOUR VEHICLE

3. Remove the three upper light assembly retaining nuts.
4. Remove the three bulb and socket assemblies from the
upper light assembly by turning them counter-clockwise
and then pulling them out of the upper light assembly.
MAINTAINING YOUR VEHICLE 247
7

5. Remove the upper light assembly. 6. Turn the appropriate bulb and socket assembly
counter-clockwise, and then pull it out of the lower light
assembly.
1 Ð Backup Light 248 MAINTAINING YOUR VEHICLE

7. Pull the bulb out of the socket assembly.
8. Push the replacement bulb into the socket assembly.
9. Reinstall the bulb and socket assembly into the lower
light assembly, and then turn it clockwise.
10. Reinstall the three bulb and socket assemblies into
the upper light assembly, and turn them clockwise.
11. Reinstall the upper light assembly and the three
retaining nuts.
12. Install the access panel and the two fasteners.
13. Close the trunk.
2 Ð Rear Turn Signal LightMAINTAINING YOUR VEHICLE 2497

License Light
1. Open the trunk.
2. Turn the bulb and socket assembly counter-clockwise,
and then pull it out of the housing.3. Pull the bulb out of the socket assembly.
4. Push the replacement bulb into the socket assembly.
5. Reinstall the bulb and socket assembly into the hous-
ing, and then turn it clockwise.
6. Close the trunk.
250 MAINTAINING YOUR VEHICLE

Carpeting............................. 233
Catalytic Converter...................... 204
CD (Compact Disc) Changer................ 114
CD (Compact Disc) Player...............108,112
Chains, Tire............................ 164
Charging System Light.................... 106
Chart, Tire Sizing........................ 150
Check Engine Light
(Malfunction Indicator Light)............... 196
Checks, Safety........................... 57
Child Restraint....................50,51,52,55
Child Restraint Tether Anchors............... 53
Circuit Breakers......................... 234
Clean Air Gasoline....................... 168
Climate Control......................... 122
Clock................................ 106
Clutch Fluid........................... 228
Compact Disc (CD) Maintenance............. 122
Console............................... 92Console, Floor........................... 92
Contract, Service........................ 279
Converter, Catalytic...................... 204
Convertible............................. 63
Convertible Boot.......................67,72
Convertible Top.......................63,232
Convertible Top Maintenance............... 232
Coolant Pressure Cap (Radiator Cap).......... 221
Cooling System......................... 219
Adding Coolant (Antifreeze).............. 221
Coolant Capacity...................... 251
Coolant Level......................219,222
Disposal of Used Coolant................ 222
Drain, Flush, and Refill.................. 220
Inspection........................... 222
Points to Remember.................... 223
Pressure Cap......................... 221
Radiator Cap......................... 221
Rubber and Plastic Components............ 224
288 INDEX