2008 DODGE SPRINTER warning light

472 Practical hintsWhat to do if ...
5
:

The yellow engine oil level
warning lamp lights up, the
-
2.0 l
engine oil level mes-
sage appears in the display
and the warning buzzer
sounds after the engine is
started or while the vehicle
is in motion.
There is insufficient or no oil in the engine.
There is a risk of engine damage.
\1Stop your vehicle as soon as it is safe to
do so.
\1Switch off the engine.
\1Check the engine oil level using the dip-
stick (\2page 328).
\1If the oil level is correct, have the mal-
function rectified immediately at an au-
thorized Sprinter Dealer.
\1If there is insufficient or no oil in the en-
gine, have the vehicle towed to an au-
thorized Sprinter Dealer.
Problem
Possible cause / result
Suggested solutions
nf_BA.book Page 472 Friday, January 25, 2008 3:53 PM

473 Practical hints
What to do if ...
5
:

The yellow engine oil level
warning lamp lights up, the HI
engine oil level message
appears in the display and
the warning buzzer sounds
after the engine is started or
while the vehicle is in mo-
tion.
The engine oil level has exceeded the maximum lev-
el.
\1Check the engine oil level and have any
excess oil siphoned off at the nearest
refueling station (\2page 328).
The engine or the catalytic converter could
be damaged.
\1If the oil level is correct, have the mal-
function rectified as soon as possible at
an authorized Sprinter Dealer.
:

The yellow engine oil level
warning lamp lights up re-
peatedly while the vehicle is
in motion.
The engine oil level indicator is malfunctioning.
\1Have the vehicle checked immediately
at an authorized Sprinter Dealer.
Problem
Possible cause / result
Suggested solutions
nf_BA.book Page 473 Friday, January 25, 2008 3:53 PM

474 Practical hintsWhat to do if ...
5
/

The yellow coolant level
warning lamp lights up while
the engine is running.
The coolant level is too low.
Never run the engine if the coolant level is too low.
The engine could overheat and be damaged.
\1Stop at the earliest opportunity.
\1Switch off the engine to cool down.
\1Check the coolant level and add coolant
as necessary (\2page 329).
\1If you are having to add coolant fre-
quently, have the cooling system
checked at an authorized Sprinter Deal-
er.
Problem
Possible cause / result
Suggested solutions
nf_BA.book Page 474 Friday, January 25, 2008 3:53 PM

475 Practical hints
What to do if ...
5
•
The red coolant warning
lamp lights up while the en-
gine is running.
The coolant temperature is too high.
\1Do not drive any further.
\1Consult an authorized Sprinter Dealer.
If the vehicle is switched off after being sub-
jected to extreme loads (for example driving
in mountainous terrain, trailer towing, etc.),
the coolant warning lamp may light up when
the ignition is switched on or the engine is
restarted. Run the engine for approximately
1 minute at idling speed.
Consult an authorized Sprinter Dealer if the
coolant warning lamp remains lit.
A
The yellow reserve fuel
warning lamp lights up while
the vehicle is in motion.
The fuel level has fallen into the reserve range.
\1Refuel at the nearest refueling station
(\2page 316).
Problem
Possible cause / result
Suggested solutions
nf_BA.book Page 475 Friday, January 25, 2008 3:53 PM

476 Practical hintsWhat to do if ...
5
A
The yellow reserve fuel
warning lamp lights up while
the engine is running and
the gauge for the fuel tank
shows zero although there is
still fuel in the tank.
The fuel filler cap is not closed.
\1Close the fuel filler cap. A clicking
sound indicates that the fuel filler cap is
closed.
\1If the malfunction continues to be indi-
cated, have it rectified immediately at
an authorized Sprinter Dealer.
q
The yellow preglow indicator
lamp lights up while the en-
gine is running.
There is a malfunction in the preglow system.
\1Consult an authorized Sprinter Dealer.
Problem
Possible cause / result
Suggested solutions
nf_BA.book Page 476 Friday, January 25, 2008 3:53 PM

478 Practical hintsWhat to do if ...
5
Problem
Possible cause / result
Suggested solutions
X
USA only:
Combination low tire pressure/
TPMS malfunction telltale for
TPMS lights up continuously.
Canada only:
Low tire pressure telltale for
TPMS lights up continuously.
WARNING
G
The TPMS detects a loss of pressure in at least
one tire.
\1Carefully bring the vehicle to a halt,
avoiding abrupt steering and braking
maneuvers. Observe the traffic situa-
tion around you.
\1Read and observe messages in the mul-
tifunction display.
If the tire inflation pressure in the respec-
tive tire(s) has (have) been corrected, the
combination low tire pressure/TPMS mal-
function telltale goes out after a few min-
utes of driving.
nf_BA.book Page 478 Friday, January 25, 2008 3:53 PM

489 Practical hints
Display messages
5
The operating system shows warnings,
malfunctions or additional information in
the display.
Certain messages are accompanied by a
warning signal or a permanent tone.
High-priority messages are highlighted
in red in the display.
Please respond in accordance with the
messages and follow the additional
notes in these Operating instructions.
\4
Low-priority messages can be ac-
knowledged using the
è
, ·
,
j
or
k
buttons on the steer-
ing wheel or using the reset button
on the instrument cluster
(
\2
page 142). They are then stored
in the malfunction memory.
\4
Highest-priority messages cannot be
acknowledged and are automatically
stored in the malfunction memory.
If you select the Malfunction memory
menu in the operating system
(
\2
page 160), the acknowledged and
unacknowledged messages will appear.
Display messages on vehicles with
steering wheel buttons
Warning
G
No messages can be displayed if there is
a failure of the instrument cluster and / or
the display. You will not then be able to
see information about the vehicle status,
such as speed and outside temperature,
warning and indicator lamps, malfunction
and warning messages or the failure of
systems. Handling characteristics may be
affected.
Continued
nf_BA.book Page 489 Friday, January 25, 2008 3:53 PM

520 Practical hintsWhere will I find...?
5
\1
Loosen thumb nuts
3
by hand and
remove.
\1
Loosen fixing nuts
2
to the thread
end.
\1
Raise spare wheel bracket
4
slight-
ly and release left securing hook
1
.
\1
Slide th pump lever for the jack into
sleeve on the right-hand side of the
spare wheel bracket
4
.
\1
Raise spare wheel bracket
4
using
the pump lever and release right se-
curing hook
1
.
\1
Slowly lower spare wheel bracket 4
to the ground.
\1
Raise spare wheel bracket
4
slight-
ly and pull the pump lever out of
sleeve.
\1
Use the pump lever to raise the
spare wheel beyond the rear end of
the spare wheel bracket.
\1
Carefully remove the spare wheel
from the bracket.Warning
G
Take care not to trap your fingers when
you lift out the spare wheel.
nf_BA.book Page 520 Friday, January 25, 2008 3:53 PM