2008 DODGE SPRINTER transmission

393 Operation
Tires and wheels
4
1Plies in side wall
2Plies under tread
This marking tells you about the type of
cord and number of plies in the side wall
and under the tread.
Accessory weightThe combined weight (in excess of those
standard items which may be replaced)
of automatic transmission, power steer-
ing, power brakes, power windows, pow-
er seats, radio, and heater, to the extent
that these items are available as factory-
installed equipment (whether installed
or not).
Tire ply material
iFor illustrative purposes only. The
actual data on tires is specific to
each vehicle and may vary from the
data shown in the above illustration.
Tire and loading terminology
nf_BA.book Page 393 Friday, January 25, 2008 3:53 PM

440 Practical hintsWhat to do if ...
5
Automatic transmissionWarning
G
Always have maintenance work carried
out at an authorized Sprinter Dealer
Continued
Warning (Continued)
G
which has the necessary specialist knowl-
edge and tools to carry out the work re-
quired.
The manufacturer recommends that you
use an authorized Sprinter Dealer for this
purpose.
Continued
Warning (Continued)
G
I n p a r t i c u l a r , w o r k r e l e v a n t t o s a f e t y o r o n
safety-related systems must be carried
out at an authorized Sprinter Dealer.
There is a risk of an accident and injury if
this work is carried out incorrectly.
nf_BA.book Page 440 Friday, January 25, 2008 3:53 PM

441 Practical hints
What to do if ...
5
Problem
Possible cause / result
Suggested solutions
The transmission no longer changes gear cor-
rectly.
The transmission is losing oil.
\1Have the transmission checked imme-
diately at an authorized Sprinter Dealer.
The acceleration ability is deteriorating.
The transmission does not shift.
The transmission is in emergency mode.
It is only possible to shift into second gear or re-
verse gear.
\1Stop the vehicle.
\1Move the selector lever to positionP.
\1Switch off the engine.
\1Wait at least 10 seconds before restart-
ing the engine.
\1Move the selector lever to positionD or
R.
\1In positionD, the transmission shifts
into second gear; in positionR, the
transmission shifts into the reverse
gear.
\1Have the transmission checked imme-
diately at an authorized Sprinter Dealer.
nf_BA.book Page 441 Friday, January 25, 2008 3:53 PM

584 Practical hintsJump-starting
5
Use a rigid towing bar and secure this
only to the front towing eye
(\2
page 585).
Tow-starting!
CAUTION
Your vehicle is equipped with an au-
tomatic transmission. Do not tow-
start your vehicle.
Warning
G
When tow-starting another vehicle, its
weight should not be greater than the per-
missible gross weight of your vehicle.
nf_BA.book Page 584 Friday, January 25, 2008 3:53 PM

587 Practical hints
Towing
5
\1
Switch on the ignition (
\2
page 111).
\1
For a distance of up to 30 miles
(50 km), move the selector lever to
position
N.
\1
For a distance greater than 30 miles
(50 km), remove the propeller shafts
to the driven axles.
Take great care when attempting to tow
the vehicle free if its drive wheels have
become embedded in loose earth or
mud, particularly if the vehicle is loaded.
Tow the vehicle smoothly and straight-
ahead. The chassis could otherwise be
damaged.
Do not attempt to tow out the vehicle if
a trailer is coupled up.Where possible, tow the vehicle out
backwards along the track made by the
vehicle previously.
With transmission damage
\1
Always remove the propeller shafts
to the driven axles.
iDeactivate the automatic locking
while driving function when towing .
You could otherwise become locked
out when pushing or towing the vehi-
cle.!
CAUTION
Do not exceed a towing speed of
50 km / h, otherwise the transmis-
sion could be damaged.
Towing out a vehicle that is stuck
Towing the vehicle in the event of
particular malfunctions!
CAUTION
Use new self-securing nuts when in-
stalling the propeller shafts.
nf_BA.book Page 587 Friday, January 25, 2008 3:53 PM

588 Practical hintsTowing
5
With front axle damage
\1
Turn the key to position
1 in the igni-
tion lock(
\2
page 111).
In the event of a malfunction in the
electrical systemIf the battery is malfunctioning, the auto-
matic transmission will be locked in
position
P. To shift the automatic trans-
mission to position
N, you must provide
power to the vehicle’s electrical system
in the same way as jump-starting
(
\2
page 581).
Have the vehicle transported on a trans-
porter or trailer.The towing eye can be used to pull the
vehicle onto a special transporter or
trailer for transportation.
\1
Shift the transmission to neutral or
move the selector lever to
position
N.
!
CAUTION
The vehicle must not be towed with
its front wheels raised and with the
key in position
2 in the ignition lock.
Active brake intervention by ESP
® or
ASR could otherwise lock the wheels
and damage the brake system.
Transporting the vehicle!
CAUTION
Only secure the vehicle at the
wheels / rims. Your vehicle could oth-
erwise be damaged.
nf_BA.book Page 588 Friday, January 25, 2008 3:53 PM

596 Practical hintsFuse Box in the Driver’s Seat
5
F use Box in th e D r ive r’ s Se atFusesNo.
Consumer
Amp.
1
Mirror adjustment*/rear
window heating*
5A
2
Rear window wiper*
30 A
3
Rear view camera*/tele-
phone*/pre-wiring mount-
ing slot (roof)*
5A
4
Operating speed governor
(ADR)*/PTO*/trailer con-
nection unit AAG*
7,5 A
5
Terminal 87 electronic
transmission control ETC,
control unit/automatic
transmission, control and
switch unit
10 A
6
Unassigned
7
Electronic selector level
module ESM
10 A
8
Terminal 15 body builder, drop
side/3-way tipper
10 A
9
Roof ventilator*/audio sig-
nal equipment*
15 A
10
Terminal 30, tapping wire
body builder
25 A
11
Terminal 15, tapping wire
body builder
15 A
12
D+, tapping wire body
builder
10 A
13
Air conditioning in the rear*
30 A
No.
Consumer
Amp.
14
Trailer socket*
20 A
15
Trailer recognition device*
25 A
16
Tire pressure monitoring
system (TPMS)*/Parktron-
ic system (PTS)*
7,5 A
17
PSM control unit*
25 A
18
PSM control unit*
25 A
19
Overhead control panel*/
sliding sunroof*
5/
25 A
20
Identification lamps*
7,5 A
21
Rear window
heating* 1
30 A
22
Rear window
heating* 2
15 A
No.
Consumer
Amp.
nf_BA.book Page 596 Friday, January 25, 2008 3:53 PM

603 *Technical data
Vehicle electronics
6
You may retrofit telephones and two-
way radios provided that the maximum
transmission outputs listed below are
not exceeded. Always have this type of
equipment professionally installed with
an exterior antenna which has been in-
stalled in such a way as to be reflection-
free.
.
Frequency range
Maximum trans-
mission output
Short wave
(< 50 MHz)
100 W
4m waveband
20 W
2m waveband
50 W
70 cm waveband
35 W
25 cm waveband
10 W
!If electrical or electronic equipment
which does not fulfill these condi-
tions is retrofitted, the vehicle’s gen-
eral operating permit may be
invalidated.
nf_BA.book Page 603 Friday, January 25, 2008 3:53 PM