2008 DODGE CALIBER spare wheel

[x] Cancel search: spare wheel

Page 308 of 402

DODGE CALIBER 2008 1.G Owners Manual •Turn on the Hazard Warning Flasher.
•Block both the front and rear
of the wheel diagonally oppo-
site the jacking position. For
example, if changing the right
front tire, block the left rear
whee

Page 309 of 402

DODGE CALIBER 2008 1.G Owners Manual 1. Remove the scissors jack and lug wrench from the
spare wheel as an assembly. Turn the jack screw to the left
to loosen the lug wrench and remove the wrench from
the jack assembly.
2. Loosen, but do

Page 310 of 402

DODGE CALIBER 2008 1.G Owners Manual 3. There are two front jacking locations and two rear
jacking locations on each side of the body. The front
locations are outlined by two triangular cutouts, the rear
ones by two rectangular cutouts.

Page 311 of 402

DODGE CALIBER 2008 1.G Owners Manual WARNING!
To avoid possible personal injury, handle the wheel
covers with care to avoid contact with any sharp
edges.
NOTE:The wheel cover is held on the wheel by the
wheel nuts. When reinstalling the

Page 386 of 402

DODGE CALIBER 2008 1.G Owners Manual Cargo Load Floor........................ 150
Cargo Tie-Downs........................ 150
Carrier, Luggage........................ 153
Catalytic Converter...................... 326
Caution, Exhaust Gas

Page 397 of 402

DODGE CALIBER 2008 1.G Owners Manual Service Assistance....................... 373
Service Contract......................... 375
Service Manuals........................ 377
Setting the Clock................187,189,197,210
Settings, Perso
Page:   < prev 1-8 9-16