2008 Citroen C8 trip computer
[x] Cancel search: trip computerPage 5 of 194
I
IN BRIEF
1.
Volumetric alarm deactivation
switch.
2. Cruise control / speed limiter
controls.
3. Lighting, direction indicator
controls.
4. Driver’s airbag. Horn.
5. Multifunction display.
6. Radio controls under steering
wheel.
7. Screen wipe / screen wash /
trip computer controls.
8. Gear lever.
9. Ignition.
10. Headlamp height adjustment.
11. a/ ESP/ASR activation/
deactivation button.
b/ Parking assistance activation/deactivation button.
12. Steering column adjustment
control.
D A S H B O A R D
Page 28 of 194
33
II
M U L T I F U N C T I O N D I S P L A Y
D i s p l a y C
Main menu
Press control
A to display the
“Main menu” for the multifunction
screen. Using this menu, you have
a c c e s s t o t h e f o l l o w i n g f u n c t i o n s :
The driver is advised not to
manipulate the controls described
b e l o w w h i l e d r i v i n g .
1 -
Time.
2 - Ambient temperature
3 - Date and Display zone
If the outside temperature is
b e t w e e n + 3 ° C a n d - 3 ° C , t h e
t e m p e r a t u r e d i s p l a y l a s h e s ( r i s k
of ice).
Note: The outside temperature
displayed may be higher than the
actual temperature if the vehicle is
standing in bright sunshine.
Radio-CD
(See radio-CD handbook)Trip computer, giving
you:
- Distance to your
destination.
- Access to log of alerts (list of the alerts that have been previously
signalled).
- Access to the status of functions, for example activation/
deactivation of automatic
headlamp lighting, daytime-
r u n n i n g l a m p s , E S P , w i n d s c r e e n
w i p e .
Personalisation -
C o n i g u r a t i o n , a l l o w i n g
you to activate or
deactivate:
- t h e t r i g g e r i n g o f r e a r w i p e
- the automatic guide-me-home lighting
- the automatic lighting of hea- dlamps
- automatic lighting of daytime- running lamps
Also to choose:
- Brightness, the time, the date, units.
- The display language.
Note : activation/deactivation of
automatic lighting of daytime-run-
ning lamps is available depending
on the country of marketing.
Controls
A
- Access to the “Main menu”
B - Scrolling in the display
menus.
C - Validation and Selection in
the menus, of the function
c h o s e n o r v a l u e m o d i i e d
D - Cancellation of the operation
or return to the previous
display.
E - Selection of the type of
i n f o r m a t i o n y o u w i s h t o s e e
permanently displayed (date,
radio-CD, trip computer) on
the right of the screen
Page 29 of 194
3 4 II
M U L T I F U N C T I O N D I S P L A Y
D i s p l a y C
PERSONALISATION and
CONFIGURATION
To activate/deactivate rear
screen wipe when engaging
reverse gear :
- Press
A.
- Select the “Personalisation- C o n i g u r a t i o n ” i c o n u s i n g B,
t h e n c o n i r m y o u r c h o i c e b y
pressing C.
- Then select the vehicle parame- ters sub-menu.
C o n i r m b y p r e s s i n g C.
- Using B, select rear screen
w i p e .
C o n i r m b y p r e s s i n g C.
- Then by pressing C, select/de-
s e l e c t r e a r s c r e e n w i p e t o a c t i -
vate/deactivate.
- Validate using “OK” on the dis-
play.
TRIP COMPUTER
To enter the distance to be
travelled in the trip computer:
- Press on
A.
- Use B to select the trip computer
i c o n , t h e n c o n i r m w i t h a p r e s s
on C.
- Select your entry of distance, using B . C o n i r m y o u r c h o i c e
w i t h a p r e s s o n C.
- To choose the distance, select t h e i g u r e t o b e m o d i i e d , u s i n g B,
t h e n c o n i r m w i t h a p r e s s o n C.
- Use B to adjust the value then
v a l i d a t e w i t h a p r e s s o n C.
- Validate on “OK” on the display.
To access the log of alerts in
the trip computer:
- Press on A.
- Use B to select the trip computer
i c o n , t h e n c o n i r m w i t h a p r e s s
on C.
- Select the log of alerts.
- When the list is displayed, scroll d o w n b y p r e s s i n g B.
- Press on D, to return to the
permanent display.
To access the status of
functions, proceed in a similar
manner. To activate/deactivate the
automatic guide-me-home
lighting:
- Press on
A.
- Use B to select the icon
“ P e r s o n a l i s a t i o n - C o n i g u r a t i o n ”
t h e n c o n i r m y o u r c h o i c e w i t h a
press on C.
- Then select the sub-menu for v e h i c l e p a r a m e t e r s . C o n i r m
y o u r c h o i c e w i t h a p r e s s o n C.
- Using B, select lighting and
s i g n a l l i n g . C o n i r m y o u r c h o i c e
w i t h a p r e s s o n C.
- T h e n w i t h a p r e s s o n C, select/
deselect guide-me-home lighting
to activate or deactivate it. After
activation, choose the duration:
press on C then use B to select
the duration and press on C.
- Validate on “OK” on the display.
To activate/deactivate the au-
tomatic lighting of headlamps,
proceed in a similar manner.
Page 31 of 194
3 II
NaviDrive display
Display C
T R I P C O M P U T E R
Range
This indicates the mileage that can still be travelled
using the fuel remaining in the tank.
When the distance remaining to be travelled is less
than around 30 km (approx. 20 miles), only three
dashes are visible.
Instantaneous fuel consumption
This is calculated from consumption over the previous
2 s e c o n d s . T h i s f u n c t i o n i s o n l y a v a i l a b l e w h e n
travelling at over 30 km/h (approx. 20 mph).
Distance travelled
It indicates the distance travelled since the trip computer
w a s l a s t r e s e t t o z e r o .
Average fuel consumption
The average fuel consumption is calculated from the
last reset of the computer.
Average speed
The average speed is obtained, from the last reset of
the computer, by dividing the distance covered by the
time taken (ignition on).
Distance remaining to be travelled
To enter it, see Multifunction display.
Page 32 of 194
3 II
M U L T I F U N C T I O N D I S P L A Y
N A V I D R I V E C O L O U R S C R E E N
Controls
A -
Access to the “Main menu”
B - Scrolling in the display
menus.
C - Validation and Selection in
the menus, of the function
c h o s e n o r v a l u e m o d i i e d
D - Cancellation of the operation
or return to the previous
display
E - Selection of the type of
i n f o r m a t i o n y o u w i s h t o s e e
permanently displayed (date,
radio-CD, trip computer) on
the right of the screen
Main menu
Press control A to display the
“Main menu” for the multifunction
screen. Using this menu, you have
a c c e s s t o t h e f o l l o w i n g f u n c t i o n s : T r a f i c i n f o r m a t i o n
(See NaviDrive handbook)
Vehicle diagnostics
(See NaviDrive handbook)
Telematics
(See NaviDrive handbook)
C o n i g u r a t i o n
, for adjusting
various parameters (date,
time, units)
(See NaviDrive handbook)
Map
(See NaviDrive handbook)
Video
(See NaviDrive handbook)
Navigation/guidance
(See NaviDrive handbook)
Audio
(See NaviDrive handbook)
The driver is advised not to
manipulate the controls described
b e l o w w h i l e d r i v i n g .
1 -
Outside temperature
2 - Directory
3 - Date
4 - Telephone
5 - Time.
If the outside temperature is
b e t w e e n + 3 ° C a n d - 3 ° C , t h e
t e m p e r a t u r e d i s p l a y l a s h e s ( r i s k
of ice).
Note: The outside temperature
displayed may be higher than the
actual temperature if the vehicle is
standing in bright sunshine.
Page 33 of 194
3 II
NaviDrive display
Display C
T R I P C O M P U T E R
Range
This indicates the mileage that can still be travelled
using the fuel remaining in the tank.
When the distance remaining to be travelled is less
than around 30 km (approx. 20 miles), only three
dashes are visible.
Instantaneous fuel consumption
This is calculated from consumption over the previous
2 s e c o n d s . T h i s f u n c t i o n i s o n l y a v a i l a b l e w h e n
travelling at over 30 km/h (approx. 20 mph).
Distance travelled
It indicates the distance travelled since the trip computer
w a s l a s t r e s e t t o z e r o .
Average fuel consumption
The average fuel consumption is calculated from the
last reset of the computer.
Average speed
The average speed is obtained, from the last reset of
the computer, by dividing the distance covered by the
time taken (ignition on).
Distance remaining to be travelled
To enter it, see Multifunction display.
Page 34 of 194
37
II
Displays C and NaviDrive
The trip computer gives access to 3 types of instantaneous informat ion:
- Range
- Instantaneous consumption
- Distance remaining to be travelled.
I t a l s o g i v e s y o u a c c e s s t o 3 t y p e s o f i n f o r m a t i o n f o r t w o J o u r n e y s 1 a n d 2 :
- Distance travelled
- Average consumption
- Average speed.
The journeys
J o u r n e y s 1 a n d 2 a r e i d e n t i c a l b u t i n d e p e n d e n t o f e a c h o t h e r . F o r e x a m p l e ,
y o u c a n u s e J o u r n e y 1 f o r d a i l y c a l c u l a t i o n s a n d J o u r n e y 2 f o r m o n t h l y
calculations.
To reset a journey to zero
When the desired journey is displayed, give a long press on th e end of the
w i p e r s t a l k .
To select the different types of
i n f o r m a t i o n a n d d i s p l a y s , b r i e l y
p r e s s t h e e n d o f t h e w i n d s c r e e n
w i p e r c o n t r o l .
To reset trip computer informa-
tion to zero
, press continuously
f o r a f e w s e c o n d s o n t h e e n d o f
t h e s t a l k w h e n o n e o f t h e i n f o r m a -
tion types is displayed.
- Distance travelled.
- Average fuel consumption.
- Average speed.
A press on the “ MODE” button
brings up a permanent display of
the trip computer information. T R I P C O M P U T E R
Page 35 of 194
3 II
NaviDrive display
Display C
T R I P C O M P U T E R
Range
This indicates the mileage that can still be travelled
using the fuel remaining in the tank.
When the distance remaining to be travelled is less
than around 30 km (approx. 20 miles), only three
dashes are visible.
Instantaneous fuel consumption
This is calculated from consumption over the previous
2 s e c o n d s . T h i s f u n c t i o n i s o n l y a v a i l a b l e w h e n
travelling at over 30 km/h (approx. 20 mph).
Distance travelled
It indicates the distance travelled since the trip computer
w a s l a s t r e s e t t o z e r o .
Average fuel consumption
The average fuel consumption is calculated from the
last reset of the computer.
Average speed
The average speed is obtained, from the last reset of
the computer, by dividing the distance covered by the
time taken (ignition on).
Distance remaining to be travelled
To enter it, see Multifunction display.