2008 Citroen C5 wheel

135
IV
Selecting CD source
After inserting a CD, with the printed side facing upwards, the player will start playing the CD automatically.
To change manually to CD source (CD already inserted), press but-ton D until you obtain the source you require.
Ejecting a CD
Press button B to eject the CD, the audio system will automatically switch to radio source.
If the CD is not removed within 10 to 15 seconds of being ejected, it will automatically be taken back into the CD player, although it will not be played.
Selecting a track
Press button K once to play the next track.
Press button N once to return to the beginning of the track currently being played, press a second time to go back to the start of the previ-ous track.
Press the buttons successively to skip several tracks at a time.
You can also perform this opera-tion using button G or button 9 at the steering wheel.
When the track listing is displayed, select the desired track using but-tons J or M then validate with but-ton L.
C D S O U R C E
You can also do this via the con-trols 7 and 8 at the steering wheel.
Fast forward and rapid reverse with accelerated sound
To move swiftly through the CD, press and keep pressed button Kor N, respectively for fast forward or rapid reverse with accelerated sound.
You can also do this via the con-trols 7 and 8 at the steering wheel.
Play resumes as normal when the button is released.
Menu
This menu allows activation/deac-tivation of two options:Playback of the fi rst 7 seconds (approx.) of each track of the CD.
Random playback of the CD tracks.
This can be accessed in two ways:Either by pressing button Oand proceeding as for Scan-ning of RDS stations – the sub-menu for Audio Preferences.
Or, provided you are in CD source, by pressing on but-ton L. You can then access the Audio menu.
Note: If one of these options is active, it remains active for CD changer source.

158
V
T A B L E O F F U S E S
Fusebox C
Ref.RatingFunction
F115ARear screen wipe (Tourer)
F230ALocking and deadlocking relay
F35AAirbags
F410AAutomatic gearbox - Additional heater unit (Diesel) - Electrochrome rear view mirrors
F530AFront window - Sun roof - Passenger door lighting - Passenger rear view mirror adjustment
F630ARear window
F75AVanity mirror lighting – Glove box lighting – Interior lamps - Torch (Tourer)
F820ARadio - CD changer - Controls at the steering wheel – Displa y – Tyre defl ation detection - Electric boot ECU
F930ACigar-lighter - Front 12V socket
F1015AAlarm - Controls on the steering wheel, signalling and screen w ipe controls
F1115ALow current anti-theft switch
F1215ADriver’s electric seat - Instrument panel - Seat belt not fastened warning lamps - Air conditioning controls
F135AEngine relay unit - Hydraulic suspension pump cut-off relay - Airbag ECU supply
F1415ARain and brightness sensor - Parking assistance - Passenger’s electric sea t - Trailer relay unit - HIFI amplifi er ECU - Hands-free kit - Lane Departure Warning System
F1530ALocking and deadlocking relay
F1740AHeated rear screen - Exterior heated rear view mirrors
FSHSHUNTCUSTOMER PARK SHUNT

167
VI
A
B
CD
C H A N G I N G B U L B S
R E A R L A M P S ( S A L O O N )
Rear lamp on wing
1 Remove the lateral boot trim fl ap A. To do so, pull it towards the inside of the boot, then pull it upwards.
2 Disconnect connector B.
3 Unscrew the 2 fi xings C.
4 Remove the lamp from its housing.
5 Detach the bulb holder D.
6 Replace the bulb.
7 Replace the bulb holder D.
8 Place the lamp in its housing.
9 Screw in the 2 fi xings C.
10 Connect connector B.
11 Refi t the trim A.
Note: You can use the spare wheel jack handle to screw or unscrew the fi xings C.

169
VI
A
B
CD
A
1
2
1
2
C H A N G I N G B U L B S
R E A R L A M P S ( T O U R E R )
Rear lamp on wing
Remove the lateral boot trim A.
To do so :
1 Pull it towards towards the inside of the boot.
2 Pull it upwards.
3 Disconnect the connector B.
4 Unscrew the fi xing screw C.
5 Remove the lamp from its housing.
6 Detach the bulb holder D.
7 Replace the faulty bumb.
8 Replace the bulb holder D.
9 Place the lamp in its housing.
10 Screw in the fi xing screw C.
11 Connect the connector B.
12 Refi t the trim A.
Note : You can use the spare wheel jack handle to screw or unscrew the fi xing screw C.

172
VI
S A F E T Y R E C O M M E N D A T I O N S
It is essential to install a CITROËN approved electronic unit when having a towbar fi tted, in order to prevent any ris k of malfunction or damage (risk of fi re).
If you are towing another vehicle, the latter must be free-wheeling (gearbox in neutral).
Do not exceed the maximum permitted load.
For the maximum distributed load on the roof bars: see the chapter “General”.
Roof bars
For your safety and to avoid dam-age to the roof, you must use roof bars that are tested and approved by AUTOMOBILES CITROËN.bars that are tested and approved bars that are tested and approved
Recommendations:
Spread the load evenly, avoid-ing overloading on one side.
Position the heaviest weight as low down as possible.
Tie the load down securely and add warning signs if it is pro-truding.
Drive conservatively, as the vehicle will be more vulnerable to side winds.
The stability of your vehicle may be altered.
Remove the roof rack or roof bars when you are not using them.

174
VI
35
6
1
2
4
C H A N G I N G A W H E E L
Access to the spare wheel
To access the spare wheel
1 Lift up the boot fl oor using the strap (saloon) or the retractable handle (Tourer).
2 Fold back the boot carpet (saloon).
3 Attach the hook to the upper section of the boot (in the middle of the boot pillar).
4 To remove the spare wheel, detach the strap then push the wheel forwards so as to be able to lift it.
Tools
The tools are to be found in a pro-tective holder inside the spare wheel. Pull back the retaining strap to have access.
1 Handle
2 Jack
3 Tool for the removal/refi tting of bolt protectors
4 Centring guide
5 Towing eye
6 Moveable chock
To reposition the spare wheel
To put the spare wheel back in the boot
1 Position the spare wheel fl at in the boot, then pull it towards you.
2 Next place the toolbox inside the wheel, then secure the assem-bly with the belt.
3 Release the strap to return the boot fl oor to its initial position.
Tyre pressures
The tyre pressure is indicated on the label located on the left-hand door centre pillar. On this label, the pressures are specifi ed, according to the vehicle load.

175
VI
3
Before positioning the jack :Always adjust the vehicle’s ground clearance to the “maximum height” position and retain this adjustment for as long as the jack is under the vehi-cle (do not use the hydraulic adjustments).Immobilise your vehicle on horizontal, stable and non-slippery ground.
Ensure that any passengers have left the vehicle and are in a safe place.
Never get underneath the vehi-cle if it is supported only by the jack.
The jack and all of the tools are specific to your vehicle. Do not use them for any other applications.
Have the original wheel repaired and refi tted as soon as possi-ble.
-
-
-
REMOVAL
1 Park the vehicle on stable, fi rm ground that is not slippery. Apply the parking brake.
C H A N G I N G A W H E E L
2 If your vehicle is equipped with “Hydractive III+” suspension, with the engine running at idle, adjust the ground clearance to its maximum height. See chap-ter “Hydractive III+ Suspen-sion”.
3 Switch off the ignition and engage fi rst gear or reverse gear depending on any slope (for a vehicle with automatic gearbox, select position P).
4 If your vehicle is fi tted with “Hydractive III+” suspension, position the chock, whichever direction the gradient may be in, in front of the front wheel diametrically opposite to the one to be replaced.
5 Position the jack at one of the four jacking-points provided on the subframe close to the wheels, then use the handle to unwind the jack until it reaches the ground.
6 Remove the protector from each bolt using tool 3.
7 Slacken the wheel bolts.
8 Continue to extend the jack until the wheel is a few centimetres off the ground.
9 Undo the bolts, remove the wheel.

176
VI
If your vehicle is fi tted with a spare wheel of a different size to those on the vehicle, you must not exceed 80 km/h (50 mp h) whilst using the spare wheel.
The wheel bolts are specifi c to the type of wheel.
If the type of wheel is changed, check with your CITROËN dealer that the wheel bolts are compatible with the new wheels.
Note: take care to note down the code number engrav ed on the head of the anti-theft bolt socket. This will enable you to obtain replacement anti-theft bolt sockets from a dealership.
Spare wheel
Your vehicle may be fi tted with a different spare wheel to those on the vehicle. When fi tting the spare wheel, it is normal to notice that the wheel bolt washers do not come into contact with the wheel rim. The spare wheel is secured by the conical tapering of the wheel bolt’s shaft.
When refi tting the original wheel, ensure that the wheel bolt contact surfaces are clean and in good condition.
Refi tting a wheel
1 Fit the wheel on the hub, using the centring guide. Make sure that the contact surface between the hub and the wheel is clean.
2 Screw in the bolts but do not fully tighten them.
3 Lower the jack and remove it.
4 Tighten the wheel bolts, using the wheelbrace.
5 Refi t the protectors on the bolts.
6 Return the ground clearance to the normal position. See chap-ter “Hydractive III+ Suspen-sion”.
7 Ensure the tyre pressure is cor-rect (see “Vehicle identifi ca-tion”) and have the balancing checked.
Wheel equipped with defl ation detection sensor
Such wheels have tyre pressure sensors. It is essential to have repairs carried out by a CITROËN dealer.
Anti-theft bolts
Each wheel is equipped with one anti-theft bolt.
To remove it
1 Remove the protector using tool 3.
2 Use the anti-theft socket with the handle.
C H A N G I N G A W H E E L