2008 Citroen C5 audio
[x] Cancel search: audioPage 127 of 240
130
IV
On / Off
With the key in Drive position M, press on control A to switch the radio on or off.Note:If the radio was on the last time you switched off the ignition, it will resume automatically when you switch on the ignition again. You will not have to press on control A.
After switching off the ignition, you can still operate the audio system even without the igni-tion key being present. Simply press on button A. The system will turn itself off after approx.30minutes.
Anti-theft system
This radio is coded in such a way a s t o f u n c t i o n o n l y o n y o u r p a r t i c u -lar vehicle. It would be unusable if installed on any other vehicle.Note: The anti-theft system is automatic and requires no action on your part.
Page 130 of 240
133
IV
Using the RDS (radio data system) function on FM
The majority of FM radio stations use the RDS system. The radio in your vehicle has this system.
The RDS system enables these s t a t i o n s t o t r a n s m i t n o n - a u d i b l e data in addition to the broadcasting o f t h e i r p r o g r a m m e s . T h e d a t a p r o -vides access to various functions described in this chapter, such as: d i s p l a y o f t h e s t a t i o n n a m e , i n t e r - m i t t e n t t r a f fi c i n f o r m a t i o n fl a s h e s or automatic scanning of stations. T h i s e n a b l e s y o u t o c o n t i n u e l i s -tening to your chosen radio station, r e g a r d l e s s o f t h e d i f f e r e n t f r e q u e n -cies it uses in the regions through which you are travelling.
Scanning of RDS stations
Your radio keeps the best possible reception by continuously looking for any other frequencies on which t h e s e l e c t e d r a d i o s t a t i o n i s b r o a d -cast, automatically choosing the f r e q u e n c y o f f e r i n g t h e b e s t r e c e p -tion (if the station broadcasts on m o r e t h a n o n e t r a n s m i t t e r o r f r e -quency).
R D S S Y S T E M
Activation/deactivation of the RDS functions
The RDS functions can be accessed via the following two menus:Main menu (press button O).
AUDIO menu (press button L).
To activate/deactivate the RDS functions
1. Press on button O.2. Select the AUDIO icon using buttons J or M.3. C o n fi r m y o u r c h o i c e w i t h a press on button L.4. S e l e c t t h e s u b - m e n u f o r t h e F M waveband, via buttons J or M. C o n fi r m y o u r c h o i c e w i t h a press on button L.5. S e l e c t s c a n n i n g f o r R D S s t a -tions, via buttons J or M.6. Validate your choice with a press on button L.7. Using control L, select/deselect t o a c t i v a t e / d e a c t i v a t e t h e f u n c -tion.8. V a l i d a t e y o u r c h o i c e b y s e l e c t -ing “OK” on the display.
Page 131 of 240
134
IV
Regional search mode
Some stations, when they are organised in networks, broadcast regional programmes at certain t i m e s o f d a y , a n d n a t i o n a l p r o -grammes at other times.
It is possible to search.Either for a regional station only.
Or across the whole network i n o r d e r t o fi n d a d i f f e r e n t p r o -gramme.
To activate/deactivate this function, proceed as for Scanning of RDS stations.Note: When this mode is activated, the system will remain tuned to one s p e c i fi c r e g i o n a l s t a t i o n .
T A t r a f fi c i n f o r m a t i o n ( t r a f fi c announcements)
S o m e s t a t i o n s a l l o w b r o a d c a s t -ing, only in FM, of these messages thanks to the “TA” function.
You can activate the “TA ” f u n c -tion by pressing on button I. This allows you, even though you are listening to another audio source or to a radio programme not itself p r o v i d i n g t r a f fi c m e s s a g e s , t o r e c e i v e t r a f fi c i n f o r m a t i o n fl a s h e s f r o m a n F M s t a t i o n w h i c h b r o a d -casts them.
Page 132 of 240
135
IV
Selecting CD source
After inserting a CD, with the printed side facing upwards, the player will start playing the CD automatically.
To change manually to CD source ( C D a l r e a d y i n s e r t e d ) , p r e s s b u t -ton D until you obtain the source you require.
Ejecting a CD
Press button B to eject the CD, the audio system will automatically switch to radio source.
I f t h e C D i s n o t r e m o v e d w i t h i n 1 0 t o 1 5 s e c o n d s o f b e i n g e j e c t e d , i t will automatically be taken back into the CD player, although it will not be played.
Selecting a track
Press button K once to play the next track.
Press button N once to return to the beginning of the track currently being played, press a second time t o g o b a c k t o t h e s t a r t o f t h e p r e v i -ous track.
Press the buttons successively to skip several tracks at a time.
Y o u c a n a l s o p e r f o r m t h i s o p e r a -tion using button G or button 9 at the steering wheel.
When the track listing is displayed, s e l e c t t h e d e s i r e d t r a c k u s i n g b u t -tons J or M t h e n v a l i d a t e w i t h b u t -ton L.
C D S O U R C E
Y o u c a n a l s o d o t h i s v i a t h e c o n -trols 7 and 8 at the steering wheel.
Fast forward and rapid reverse with accelerated sound
To move swiftly through the CD, press and keep pressed button Kor N, respectively for fast forward or rapid reverse with accelerated sound.
Y o u c a n a l s o d o t h i s v i a t h e c o n -trols 7 and 8 at the steering wheel.
Play resumes as normal when the button is released.
Menu
T h i s m e n u a l l o w s a c t i v a t i o n / d e a c -tivation of two options: P l a y b a c k o f t h e fi r s t 7 s e c o n d s (approx.) of each track of the CD.
Random playback of the CD tracks.
This can be accessed in two ways:Either by pressing button O a n d p r o c e e d i n g a s f o r S c a n - n i n g o f R D S s t a t i o n s – t h e s u b -menu for Audio Preferences.
Or, provided you are in CD s o u r c e , b y p r e s s i n g o n b u t -ton L. You can then access the Audio menu.
Note: If one of these options is active, it remains active for CD changer source.
Page 133 of 240
136
IV
MP3 CDs
T h e M P 3 f o r m a t ( M P E G 1 , 2 & 2 , 5 A u d i o L a y e r 3 ) i s a n a u d i o c o m -pression standard that permits r e c o r d i n g o f 1 0 t i m e s a s m a n y m u s i c a l fi l e s o n o n e C D .
Y o u r r a d i o o n l y p l a y s b a c k fi l e s which have the extension “.mp3”. O t h e r t y p e s o f fi l e s ( . w a v , . m p g 4 , .ogg, midi...) cannot be played back.
When you insert an MP3 CD, the radio searches all the musical tracks. Playback may require some tens of seconds before starting.
P l a y b a c k o f t h e M P 3 C D i s o p t i -mised if the level of the cover is limited to 2.
Burning format
Some burnt CDs cannot be read by your equipment (quality, speed of recording, etc.).
W h e n y o u b u r n a C D - R o r C D - R W , select the burning standard ISO 9 6 6 0 l e v e l 1 . 2 o r J o l i e t . P l a y b a c k o f o t h e r f o r m a t s m a y n o t o c c u r c o r -rectly.
Use the Joliet standard to burn m u l t i - s e s s i o n C D s .
On a given CD, always use the same burning standard.
T o o b t a i n t h e b e s t p o s s i b l e a c o u s - t i c q u a l i t y , s e l e c t t h e l o w e s t b u r n -ing speed.
It can handle transmission speeds o f 8 t o 3 2 0 k b i t s / s a n d p l a y b a c k o f 2 2 . 0 5 t o 4 4 . 1 k H z .
M P 3 C D S O U R C E
MP3 CD player
Your Audio CD system may be MP3 compatible.
As you insert a CD recorded in MP3 format, playback starts of the fi r s t s o n g o f t h e fi r s t C D - c o v e r .
You can select a particular track by using buttons N or K a n d C D - c o v -ers using buttons J or M.
To select a track
T o d i s p l a y t h e l i s t o f C D - c o v e r s , press on button G.
Use buttons J or M to select the C D - c o v e r y o u w i s h t o l i s t e n t o .
T o o p e n a C D - c o v e r , p r e s s L.
Use buttons N or K to select the track you wish to listen to.
Validate with a press on L.
Menu
T h i s m e n u i s f o r a c t i v a t i o n / d e a c t i -vation of three options:
P l a y b a c k o f t h e fi r s t 7 s e c o n d s (approx.) of each track of the CD.
R e p e t i t i o n o f t h e c u r r e n t C D -cover.
R a n d o m p l a y b a c k o f C D - c o v e r t r a c k s b y C D - c o v e r .
This can be accessed in two ways:
Either by pressing button O a n d p r o c e e d i n g a s f o r S c a n - n i n g o f R D S s t a t i o n s – t h e s u b -menu for Audio Preferences.
Or, provided you are in CD s o u r c e , b y p r e s s i n g o n b u t -ton L. You can then access the Audio menu.
Page 136 of 240
139
IV
Main Menu
Press on the Menu button O to access to Main menu, then select the “Telephone ” i c o n u s i n g b u t -tons J or M), then validate the selection via button L.
You have access:
To the Directory.
T o C o n fi g u r a t i o n .
T o C o m m u n i c a t i o n M a n a g e -ment.
You access your choices via (Jor M), then you validate them with a press on L.
This main menu can also be accessed by pressing button Ethen button L.
Folder
This menu lets you open:
The telephone Directory of the telephone that is connected.
The Calls List.
Telephone directory
A telephone call can be made independently of the telephone or of the audio system, thanks to the directory.
The directory is displayed. Select the number via J or M , t h e n v a l i -date with a press on L.
Page 137 of 240
140
IV
B L U E T O O T H®
Voice recognition
Pressing on the end of the lighting control stalk 10 starts telephone voice recognition.
Voice recognition allows you to make a call to a number for which you have recorded a label on the mobile telephone that is twinned and connected.
Remark:
I t i s p o s s i b l e t o s t o p t h e c a l l , p r o - v i d e d t h e d i a l l i n g h a s n o t y e t c o m -menced, with a short press on the end of the lighting control stalk 10.
Remarks:While you are on a call, the audio source currently being listened to is paused.
Some ring tones on your mobile t e l e p h o n e m a y n o t b e r e c o g -nised by the Bluetooth® t e l e p h o n e m a y n o t b e r e c o g - t e l e p h o n e m a y n o t b e r e c o g - system ®
on your vehicle. A different ring t o n e w i l l b e c h o s e n b y t h e s y s -tem.
Page 139 of 240
142
IV
F R E Q U E N T L Y - A S K E D Q U E S T I O N S
QUESTIONANSWERSOLUTION
There is a discrepancy in sound quality between the different audio sources (radio, CD, CD changer etc.).
To achieve an optimum listening quality, the audio adjustments (Volume, Bass, Treble, Ambiance, Loudness) can be adapted to each of the different sound sources, which can produce audible shifts when you change the source (radio, CD, CD changer etc.).
C h e c k t h a t t h e a u d i o a d j u s t m e n t s ( V o l - u m e , B a s s , T r e b l e , A m b i a n c e , L o u d -ness) are adapted to your preferences for each of the sources being listened to.
The CD immediately ejects.The CD is the wrong way up, is unplayable, does not contain audio data or contains an audio format that the radio cannot play back.
Check that you have inserted the CD the right way up in the CD player.
Check the condition of the CD: the CD c a n n o t b e p l a y e d b a c k i f i t i s t o o d a m -aged.
Check the contents if it is a burnt CD: refer to the advice given in the chapter on Audio System.
For reasons of poor quality, some burnt CDs will not be played back by the audio system.
The CD changer does not play back DVDs.
The CD changer does not play back MP3 CDs.
The CD player sound is downgraded.The CD is scratched or of poor quality.Insert only CDs of good quality and keep them in good condition.
T h e p r e - s e t s t a t i o n s d o n o t w o r k ( n o s o u n d , 8 7 . 5 M h z is displayed, etc.).
The waveband selected is not the correct one.
Press on the button BND to retrieve the w a v e b a n d ( A M , F M 1 , F M 2 , F M A S T ) w h e r e t h e s t a t i o n s h a v e b e e n m e m o -rised.
The table below brings together the answers to the questio ns that are the most frequently asked.