2008 Citroen C5 DAG change time

101
III
A U T O M A T I C A I R C O N D I T I O N I N G
D U A L - Z O N E
Operating the air conditioning sys-tem on “AUTO” guarantees good ventilation inside the cabin.Note: The value indicated on the display corresponds to a comfort level and not to a temperature in Celsius or Fahrenheit.
Manual mode
One or more functions can be adjusted manually, while still retain-ing the other functions in automatic mode.
Press on any of the buttons, except for temperature 2a and 2b. Lights Aon buttons “AUTO” go out.
Changing to manual mode may result in a decrease in comfort level (temperature, humidity, smell, misting) and is not advised for opti-mum comfort.
To return to “AUTO” mode, press on buttons 1a and 1b. Lights Acome on.
3a-3b. Adjusting the air distribution
Press but-ton 3a to change the driver's side air fl ow distribu-tion.
-
The air fl ow level is indicated by the progressive lighting of the ventilator blades.
By reducing the air fl ow to its mini-mum setting, the air conditioning system switches itself off (OFF).
To prevent misting and poor air qual-ity in the passenger compartment, take care to maintain a suffi cient fl ow of air.
4. Adjusting the air fl ow
The air fl ow can only be adjusted with the engine running.
To adjust the air fl ow, press button:
to increase the air fl ow
to reduce the air fl ow
5. Air conditioning
Air conditioning only works with the engine running. The air blower button (air fl ow adjustment) must be activated to obtain air conditioning.Press on button 6. The warning lamp comes on.To function effi ciently, air conditioning should be used with the windows closed.
This button activates the recirculation of air in the passenger compart-ment and can function automatically.
6. Air recirculation – Entry of air from outside
Press button 3b to change the passenger's side air fl ow distri-bution.
The symbol (arrows) correspond-ing to the chosen distribution lights up:Windscreen and front windows.Front air vents (central, side and soft diffusion grille if open) and rear air vents.
Front and rear footwells.
Note: You cannot select distribu-tion to the windscreen/front win-dows and to the front/rear air vents at the same time.
-

128
IV
B U T T O N C O N T R O L S
AOn / Off.Volume adjustment.
BCD eject.
CCD aperture.
DSOURCESelection of source (CD/MP3 CD and CD changer source).
EBAND/ASTShort press: Selection of frequency bands and memory banks.Long press: Automatic pre-set function (Autostore).
FCall-up of audio adjustments:Sound ambiences, bass, treble, loudness, fade, balance, Call-up of audio adjustments:
speed-sensitive volume.
GLIST
Radio source:Short press: Display of the list of radio stations available (30 maximum). Display of the list of radio stations available Display of the list of radio stations available
Long press: Update of list of stations.(30 maximum).(30 maximum).
CD source:Long press:Long press: Display of list of tracks of the CD.Long press:
HESCShort press: Cancel the current operation or delete a super-imposed display.Long press: Return to the permanent display.
ITA /PT YShort press: TA function (road information).Long press: PTY function (selection of programme type).TA function (road information).TA function (road information).
JRadio source: Manual search of higher frequencies.CD/MP3 changer source: Manual search of higher frequencies. Selection of previous CD / previ- Manual search of higher frequencies. Manual search of higher frequencies.
ous CD-cover.CD/MP3 changer CD/MP3
Other sources: Scrolling in the Main Menu.
K
Radio source: Automatic search of higher frequencies.CD source, CD changer source and MP3 source:Automatic search of higher frequencies.
Short press:CD source, CD changer source and MP3 source: Forward search for tracks.CD source, CD changer source and MP3 source:
Long press: Fast forward with accelerated sound.Other sources:Long press: In the menus, choice of your adjustments.If your vehicle has the Bluetooth In the menus, choice of your adjustments.® In the menus, choice of your adjustments. In the menus, choice of your adjustments. system:® Selection of In the menus, choice of your adjustments.
characters.
LOKButton for validation and activation/deactivation of certain functions.If your vehicle has the Bluetooth® system: Answer call, end ®call.
MRadio source: Manual search of lower frequencies.CD/MP3 changer source: Selection of the next CD / next CD-cover.CD/MP3 changer
Other sources: Scrolling in the Main Menu.
N
Radio source: Automatic search of lower frequencies.CD source, CD changer source and MP3 source:Short press:CD source, CD changer source and MP3 source:CD source, CD changer source and MP3 source: Reverse search for tracks.CD source, CD changer source and MP3 source:CD source, CD changer source and MP3 source:
Long press: Rapid reverse with accelerated sound.Other sources:Long press:Long press: In the menus, choice of your adjustments.If your vehicle has the Bluetooth In the menus, choice of your adjustments. In the menus, choice of your adjustments.® In the menus, choice of your adjustments. In the menus, choice of your adjustments. system:® Selection of In the menus, choice of your adjustments. In the menus, choice of your adjustments.
characters.
OMENUDisplay of the Main Menu.In certain countries, this control is deactivated while the ve-hicle is moving.
P1- 6Radio source:Short press: Recall of pre-set stations.Long press: Memorisation.CD changer source:Long press: Selecting a CD.
QDARKShort successive presses:One press: Display of radio, time and temperature only.Two presses: Display off (blank display). Display of radio, time and temperature only Display of radio, time and temperature only
Three presses: Return to the standard display.
RMODESelection of the type of information shown on multifunction display.
SCD changer.

135
IV
Selecting CD source
After inserting a CD, with the printed side facing upwards, the player will start playing the CD automatically.
To change manually to CD source (CD already inserted), press but-ton D until you obtain the source you require.
Ejecting a CD
Press button B to eject the CD, the audio system will automatically switch to radio source.
If the CD is not removed within 10 to 15 seconds of being ejected, it will automatically be taken back into the CD player, although it will not be played.
Selecting a track
Press button K once to play the next track.
Press button N once to return to the beginning of the track currently being played, press a second time to go back to the start of the previ-ous track.
Press the buttons successively to skip several tracks at a time.
You can also perform this opera-tion using button G or button 9 at the steering wheel.
When the track listing is displayed, select the desired track using but-tons J or M then validate with but-ton L.
C D S O U R C E
You can also do this via the con-trols 7 and 8 at the steering wheel.
Fast forward and rapid reverse with accelerated sound
To move swiftly through the CD, press and keep pressed button Kor N, respectively for fast forward or rapid reverse with accelerated sound.
You can also do this via the con-trols 7 and 8 at the steering wheel.
Play resumes as normal when the button is released.
Menu
This menu allows activation/deac-tivation of two options:Playback of the fi rst 7 seconds (approx.) of each track of the CD.
Random playback of the CD tracks.
This can be accessed in two ways:Either by pressing button Oand proceeding as for Scan-ning of RDS stations – the sub-menu for Audio Preferences.
Or, provided you are in CD source, by pressing on but-ton L. You can then access the Audio menu.
Note: If one of these options is active, it remains active for CD changer source.

137
IV
CD Changer
This equipment S (if present) is located in the vehicle boot and comprises a magazine that holds up to 6 CDs.
To insert/remove a CD1. Remove the magazine from the CD changerOpen the fl ap located on the right-hand side of the boot to access the CD changer.
Press on the “EJECT” button to eject the magazine partially.
Remove the magazine carefully.Close the sliding door.
2. Removing a compartmentTake out just one drawer at a time.3. Inserting/removing a CDInsert a single CD, printed side upwards. Otherwise the CD changer will not operate.
Pull out the CD by pulling on the part that is showing.4. Repositioning the compartmentRefi t the drawer by pushing it into the magazine. Do not push directly on the CD.
5. Repositioning the magazineOpen the sliding door.
Hold the magazine, narrow side towards the opening of the CD changer.
Push the magazine gently into the aperture of the changer until there is a click.
Reclose the sliding door to prevent entry of dust or of foreign bodies.
Close the fl ap.

143
IV
F R E Q U E N T L Y - A S K E D Q U E S T I O N S
QUESTIONANSWERSOLUTION
Traffi c Announcements (TA) is displayed. I do not receive any traffi c informa-tion or public announce-ments.
The particular radio station is not in the regional traffi c information network.Change to a radio station that does broadcast traffi c information.
The reception quality of the radio station being lis-tened to gradually deterio-rates.
The vehicle is too distant from the transmit-ter, or no transmitter is present in the geo-graphical area you are passing through.
Activate the RDS function to allow the system to check whether a more pow-erful transmitter is to be found in the geographical area.
The environment (hills, high buildings, tun-nels, underground car parks, etc.) is blocking reception, even in RDS mode.
This phenomenon is normal and does not imply anything wrong with the radio.
The aerial is absent or has been damaged (for example after going through a car wash or in an underground car park).
Have the aerial checked by a CITROËN dealer.
Cutting out of sound for 1 to 2 seconds in radio mode.
The RDS system during this brief sound cut-off is searching for a better frequency that might offer improved reception of the station.
Deactivate the RDS function if the phe-nomenon occurs too frequently and always on the same journey.
When the engine is not running, the radio stops after a few minutes.
When the engine is switched off, the work-ing time for the radio depends on the battery charge. The interruption is normal: the radio goes into economy mode, cutting off in order to save the vehicle’s battery.
You have to start the engine so as to increase the battery charge.
The message “the audio system is overheating” appears on the screen.
In order to protect the audio equipment in excessive ambient temperatures, the radio goes into an automatic thermic protection mode which results in a reduction in sound volume or stopping of the CD player.
Switch off the audio system for a few minutes in order to allow the system to cool down.

162
VI
BC
D
EFA
C H A N G I N G B U L B S
H E A D L A M P S
Front headlamp unit with Xenon bulbs (D1S)
Bulbs:
A Sidelamp: W5W
B Dual-function Xenon lamp (dipped/main): D1S
C Angular lighting: HP19
D Daytime-running lamp: HP24
For the maintenance of the front headlamp unit and the changing of HP19, D1S and HP24 bulbs, con-tact a CITROËN dealer, , bulbs, bulbs, .
Front headlamps fi tted with Xenon bulbs: Because of risks of electrocution, we advise you to contact a CITROËN dealer if there is any problem.Front headlamps fi tted with Xenon bulbs: Because of risks of electrocution, we advise you to Front headlamps fi tted with Xenon bulbs: Because of risks of electrocution, we advise you to
You are advised to change the D1S bulbs at the same time, if one of them has failed.
Sidelamp
1 Lift up the pegs E to remove the cover on the headlamp.
2 Remove the protective cap F.
3 Pull the bulb holder to remove it.
4 Replace the bulb and replace the bulb holder.
5 Replace the protective cap F.
6 Replace the cover and fi x it in place using the pegs E.

163
VI
E
ADCBGF
Main beam
1 Lift up the pegs F to remove the cover on the headlamp.
2 Remove the protective cap G.
3 Disengage the retaining spring.
4 Remove the bulb and replace it, paying attention to the direction of fi tting.
5 Replace the retaining spring.
6 Replace the protective cap G.
7 Replace the cover and fi x it in place using the pegs F.
Sidelamp
1 Lift up the pegs F to remove the cover on the headlamp.
2 Remove the protective cap G.
3 Pull the bulb holder to remove it.
4 Replace the bulb and replace the bulb holder.
5 Replace the protective cap G.
6 Replace the cover and fi x it in place using the pegs F.
HEADLAMP UNIT
Bulbs:
A Main beam: H1
B Sidelamp: W5W
C Dipped beam: H7
D Bend lighting: H7
E Daytime-running lamp: HP24
For the maintenance of the front headlamp unit and the changing of HP24 bulbs, contact a CITROËN headlamp unit and the changing of headlamp unit and the changing of
dealer.
Halogen bulbs must not be changed until they have been off for a few minutes (risk of serious burns).
Do not touch the bulb directly with your fi ngers, use a lint-free cloth.
It is essential that only anti-U.V. type bulbs are used in order not to damage the headlamp.
C H A N G I N G B U L B S
H E A D L A M P S