Page 90 of 240
93
III
BCD
A C C E S S
Manual operation (Emergency mode)
Driver's door
Insert the key into the lock to lock/unlock the door.
Passenger doors
It is possible to lock the passenger doors in the event of an electrical fault by using control B on each door:With the door open, unclip the plastic cover.
Insert an object, such as the end of a key, into the cavity and turn.
Replace the plastic cover.
Close the door.
After this operation, normal opera-tion resumes using the central unlocking control (inside the vehi-cle), the remote control or the key.
Page 91 of 240
94
III
ABC
B
Manual closing
Lower the tailgate using the interior handle B.
Electric closing
Press the push-button C to close the tailgate.
Note : do not interrupt the closing of the tailgate ; if any obstacle pre-vents it closing, the operation will stop and the tailgate will automati-cally rise by a few centimetres.
TAILGATE (TOURER)
Manual opening
Press upwards on lever A and lift up the tailgate.
Electric opening
Press upwards on lever A, or press button B of the remote control.
Locking/unlocking
With the vehicle stationary, this is carried out using:
The remote control.
The key in a door lock.The interior central locking/unlocking control.
A C C E S S
In order to avoid risk of injury, make sure that no-one is in the vicin-ity of the boot when carrying out an electric opening manoeuvre.
Interrupting the opening/closing of the tailgate
When the tailgate is being closed electrically, you can interrupt its movement at any point by pressing the tailgate push-button C.
Note : After an interruption, the tailgate is held electrically in an intermediate position for about 10 minutes. After this period, the system automatically goes to standby and releases the tailgate.
To exit the intermediate position mode, close the tailgate electrically or manually.
Memorisation of an intermediate position
You can store an opening angle for the tailgate:Manually or automatically move the tailgate to the required posi-tion.
Make a long press on the push-button C. The system emits a beep.
Release the push-button C.
Cancelling the memorisation
With the tailgate in the intermedi-ate position, you can cancel the stored position :Make a long press on the push-button C. The system emits a beep.
Release the push-button C. The tailgate reverts to the fully open position.
The tailgate automatically locks when the vehicle is moving at a speed of over 10 km/h (6 mph), even if automatic central locking is deactivated. It is unlocked when a door is opened or when the central locking button is pressed (at a speed of less than 10 km/h (6 mph)).
Page 105 of 240
108
III
A
A I R B A G S
Front passenger's airbag deactivation
In order to be able to use a rear-facing child seat in the front pas-senger's seat position, it is impera-tive to deactivate the passenger's airbag.
For that:With the ignition switched off, insert the key into the switch A.
Turn the key to the “OFF” posi-tion, the passenger's airbag is deactivated.With the ignition on, the front passenger's airbag deactiva-tion warning lamp lights up on the roof console display.
Page 127 of 240
130
IV
On / Off
With the key in Drive position M, press on control A to switch the radio on or off.Note:If the radio was on the last time you switched off the ignition, it will resume automatically when you switch on the ignition again. You will not have to press on control A.
After switching off the ignition, you can still operate the audio system even without the igni-tion key being present. Simply press on button A. The system will turn itself off after approx.30minutes.
Anti-theft system
This radio is coded in such a way a s t o f u n c t i o n o n l y o n y o u r p a r t i c u -lar vehicle. It would be unusable if installed on any other vehicle.Note: The anti-theft system is automatic and requires no action on your part.
Page 129 of 240
132
IV
Display and selection of a station available in the area in which you are travelling
B r i e fl y p r e s s o n b u t t o n G o r b u t -ton 9 a t t h e s t e e r i n g w h e e l t o d i s -play the list of stations. This list is u p d a t e d e v e r y 1 0 m i n u t e s .
You can also update this list at any time by making a long press on button G or button 9 a t t h e s t e e r -ing wheel.
To listen to one of these stations, select by pressing buttons J or Mand validate using button L.
Manual pre-setting
Select the waveband and memory bank required using button E.
S e l e c t a s t a t i o n u s i n g e i t h e r a u t o -matic or manual search.
Keep pressing for more than two s e c o n d s o n o n e o f t h e p r e - s e l e c t i o n buttons 1 to 6 on the keypad P.
The sound momentarily cuts off, then returns to its previous level to c o n fi r m t h a t i t h a s m e m o r i s e d t h e station.
R A D I O S O U R C E
Automatic memorisation of transmitters (Autostore function)
In FM, if you hold down button Efor more than two seconds, your radio will automatically memorise t h e 6 s t r o n g e s t s t a t i o n s o n t h e F M 3 memory bank.
The display shows “FM AST”.
T h e r a d i o m e m o r i s e s t h e 6 s t r o n g - e s t t r a n s m i t t e r s , d e l e t i n g t h e 6 p r e -viously memorised.
After the memorisation, the radio g o e s d i r e c t l y t o m e m o r y 1 o f m e m -ory bank FM3.Note: I f t h e t r a f fi c i n f o r m a t i o n f u n c -tion has been activated (see RDS SYSTEM), the stations offering this facility will be mem-orised as priority.
If it is unable to memorise any new stations, the system will retain the previously memo-rised stations. I f t h e s y s t e m i s u n a b l e t o fi n d 6 s t a t i o n s , t h e u n fi l l e d m e m o r y slots will remain free.
Page 149 of 240
152
V
D I E S E L I N J E C T I O N E Q U I P M E N T
In the event of running out of fuel:
HDi 110 engineHDI 138 and HDi 173 engines
V6 HDi 208 engine with priming pump
After adding fuel, turn the ignition key to position M, wait for a few seconds, then operate the starter motor until the engine starts.
If the engine fails to start after sev-eral attempts, contact a CITROËN If the engine fails to start after sev-after sev-
dealer.
HDi 110, HDi 138 and HDi 173 engines with priming pump
A f t e r fi l l i n g ( m i n i m u m 5 l i t r e s ) a n d removing the protective cover, action the manual priming pump, until some resistance is felt.
Operate the starter motor while depressing the accelerator pedal slightly until the engine starts.
I f t h e e n g i n e f a i l s t o s t a r t a t t h e fi r s t attempt, wait 15 seconds before trying again.
If the engine fails to start after a few attempts, action the priming pump again and then try to start the engine.
When the engine is idling, acceler-ate slightly to complete the bleed-ing of the circuit.
Page 151 of 240
154
V
A
B
+ 1
- 4- 3
+ 2
Starting the engine after disconnecting and reconnecting the battery
1. Turn the ignition key.
2. Wait approximately 1 minute before operating the starter in order to allow the electronic systems to re-initialise.
After the battery has been discon-nected for a lengthy period of time, it may be necessary to re-initialise the following functions:
The anti-pinch on the windows.
The parameters of the multi-function display (date, time, language etc).
The Radio stations.
The NaviDrive. See NaviDrive instructions.
Page 174 of 240
177
VI
T O W I N G – L I F T I N G
TOWING WITH WHEELS ON THE GROUND
T o w i n g e y e fi x i n g s a r e l o c a t e d a t t h e f r o n t a n d a t t h e r e a r o f t h e v e h i - c l e .
D e t a c h t h e c o v e r :
F o r t h e f r o n t c o v e r , l e v e r w i t h a s c r e w d r i v e r a t t h e t o p o f t h e c o v e r .
F o r t h e r e a r c o v e r , p r e s s :
O n t h e r i g h t h a n d s i d e ( s a l o o n ) ,
O n t h e b o t t o m ( T o u r e r ) .
The ignition key must be in posi-tion M to retain steering.
U s e a b a r w i t h a t t a c h m e n t s t o t h e t o w i n g e y e s a s a b o v e .
T h e t o w i n g e y e i s r e m o v a b l e , t o b e s t o w e d i n t h e j a c k p r o t e c t i o n b o x i n s i d e t h e s p a r e w h e e l .
