2008 Citroen C4 key

174
XIII
A U D I O
HANDS-FREE TELEPHONE
Your audio system may be Bluetooth®
compatible. It allows you to connect a mobile telephone for "hands free" use and even to use its directory.
It permits you to twin up to four telephones, to be able then to connect whichever one you choose.The Bluetooth® functions available and the content of the display are dependent on the type of mobile telephone, its settings and the type of contract you have. For this reason it is advisable to make enquiries with your telephone provider.Prior to any operation:- Your display should be lit up (key in position M).
- Your telephone’s Bluetooth®
system must be activated.
Twinning a telephone
Twinning a telephone consists of having it recognised by the Bluetooth® system on your vehicle. This then permits an instantaneous connection.Twinning can only be performed with ignition switched on, display illuminated, engine stopped. No other telephone should be connected.- The twinning must be performed with the telephone and its Bluetooth® system activated.®
Note:
Refer to the user instructions to familiarise yourself with the features of twinning.- The telephone detects the Bluetooth® system on your vehicle. ®
"C4" displays on your telephone.
You should then select "C4" on your telephone controls. Next you must choose whether or not to accept this twinning then select, on screen Cusing J, M or 8, one of the 4memories. Validate with a press on button L or 7.
Note:
You can select a memory already attributed, although the telephone twinned to this location will no longer be.- Next the telephone asks you to enter an identifi cation code: 1234.
- Validate.
Note:
This entry may be demanded earlier in the twinning sequence.The telephone is now twinned to your Bluetooth® system. For ®
immediate access to the Bluetooth®
functions, it may be necessary to make a connection (see following page "Confi guration: Connecting a twinned mobile telephone").Once the twinning is fi nished, you will be able to connect your telephone via the "Main menu".
Connecting a twinned telephone
Each time you enter the vehicle, after switching on the audio system, your telephone is detected automatically. If more than one telephone is present, the last telephone to have been connected is the fi rst to be recognised.Note:Disconnections may occur. You may have to make a new connection (see following page, "Confi guration: Connecting a twinned mobile telephone").Remarks:- In the event of a problem, it is recommended to switch your telephone off and then on again.- If you switch off your telephone within the fi eld of reception of the Bluetooth® system on your vehicle, the next connection will not be automatic. To restore automatic connection, you will have to connect your telephone manually (see following page, "Confi guration: Connecting a twinned mobile telephone").- If you are already in telephone communication when the audio system is turned on, the latter detects the telephone.- To avoid interference, you are advised not to place your mobile telephone close to your radio.
To accept an incoming call
Using button L or control 7 at the steering wheel.

5
03
1
2
3
6
5
4
NAVIGATION - GUIDANCE
SELECTING A DESTINATION
Press the NAV button again or select
the NAVIGATION MENU function and
press the dial to conirm.
Select the DESTINATION INPUT
function and press the dial to conirm.
Press the NAV button.
Select the letters of the town one by
one conirming each time by pressing
the dial.
Once the country has been selected,
turn the dial and select the town
function. Press the dial to conirm.
NAVIGATION MENU
DESTINATION INPUT
Insert the SD card in the front panel reader and le
ave it there to use the Navigation functions.
The navigation SD card data must not be changed.
The map data updates are available from CITROËN dea lers.
A pre-set list (by entering the irst few letters) o f the towns in the
country selected can be accessed via the LIST butto n on the virtual
keypad. Select the NEW DESTINATION
INPUT function and press the dial to
conirm.
NEW DESTINATION INPUT
The list of the last 20 destinations appears under
the NAVIGATION
MENU function.

9
03
1
2
3
4
7
85
6
NAVIGATION - GUIDANCE
SEARCHING FOR POINTS OF INTEREST
Press the NAV button.
Press the NAV button again or select
the NAVIGATION MENU function and
press the dial to conirm.
Select the POI NEARBY function to
search for POIs around the vehicle.
Select the SEARCH POINTS OF
INTEREST function and press the
dial to conirm.
NAVIGATION MENU
SEARCH POINTS OF INTEREST
POI NEARBY
Select the POI IN CITY function to
search for POIs in the city required.
Select the country then enter the
name of the city using the virtual
keypad.
Select the POI NEAR ROUTE
function to search for POIs near the
route.
Select the POI IN COUNTRY function
to search for POIs in the country
required.
Select the POI NEAR DESTINATION
function to search for POIs near the
point of arrival of the route.
POI NEAR DESTINATION
POI IN COUNTRY
POI NEAR ROUTE
A list of cities present in the country selected ca n be accessed via
the LIST button on the virtual keypad.
POI IN CITY
The points of interest (POIs) indicate all of the s ervice locations in the vicinity (hotels, various
businesses, airports...).

16
1
2
3
4
1
4
06
2
3
5
Connect the portable equipment (MP3/WMA player…) to the audio
sockets (white and red, RCA type) in the glove box using a
JACK/RCA audio cable.
Press the MUSIC button then press
it again or select the MUSIC MENU
function and press the dial to conirm.
Select the AUX music source and
press the dial to conirm. Play begins
automatically.
Select the EXTERNAL DEVICE
function and press the dial to activate it.
EXTERNAL DEVICE
Insert one or more CDs in the
changer. Press the MUSIC button.
Press one of the buttons on the
numeric keypad to select the
corresponding CD.
Select the CD CHANGER music
source and press the dial to conirm.
The displaying and management of the controls are o perated via the
portable equipment.
CD CHANGER
Select the SELECT MUSIC function
and press the dial to conirm.
USING THE EXTERNAL DEVICE (AUX)
AUDIO/RCA CABLE NOT SUPPLIED
CD CHANGER
PLAYING A CD (NOT MP3/WMA COMPATIBLE)
SELECT MUSIC
Press the MUSIC button again or
select the MUSIC MENU function and
press the dial to conirm.
MUSIC MENU
MUSIC MEDIA PLAYERS

18
2
3
11
2
3
A short press of the steering wheel controls TEL button accepts the
incoming call or ends the call in progress. A long press refuses the
incoming call. Select the YES tab to accept or NO
to refuse and conirm by pressing the
dial.
RECEIVING A CALL MAKING A CALL
An incoming call is announced by a ring and a super
imposed display
on the multifunction display.
YES
To hang up, press the PHONE button
or press the dial and select END
CALL then conirm by pressing the
dial.
END CALL
Press the PHONE button.
It is also possible to select a number from the add ress book. You
can select DIAL FROM ADDRESS BOOK. The system permi ts the
recording of up to 4 000 entries. Select DIAL NUMBER, then dial the
telephone number using the virtual
keypad.
Select the TELEPHONE MENU
function and press the dial to conirm.
DIAL NUMBER
TELEPHONE MENU
The list of the last 20 calls made and received app
ears under
TELEPHONE MENU. You can select a number and press t he dial to
make the call.
NO

6
9
11 12
13
15
10
14Press the dial to conirm the selection.
Turn the dial and select the letters of
the town one by one conirming each
time by pressing the dial.
Turn the dial and select OK. Press the dial to conirm the selection.
To speed up the process, the POST CODE can be
entered instead of the name of the town.
Use the alphanumeric keypad to enter the letters an d
digits and "*" to correct. Press the dial to conirm the selection.Select OK on the ENTER
AN ADDRESS page.
Repeat steps 8 to 12 for the ROAD and N° functions.
OK
OK
Select the STORE function to record the address ent
ered in a
directory record and press the dial to conirm the s election.
The points of interest (POI) indicate all of the se rvice locations in the
vicinity (hotels, various businesses, airports, ... ).STORE
PARIS
POI

20
6
7
52
3
4
1
JUKEBOX
RENAME
JUKEBOX MANAGEMENT
Press the MENU button.
Select AUDIO FUNCTIONS and
press the dial to conirm.
Select the JUKEBOX function and
press the dial to conirm.
Select the JUKEBOX MANAGEMENT
function and press the dial to conirm. Select the album to be renamed and
press the dial to conirm.
Select the RENAME tab and press the
dial to conirm.
Turn the dial and select the letters of
the album title one by one conirming
each time by pressing the dial.
Use the alphanumeric keypad to enter the letters of the album title
one by one.
JUKEBOX FUNCTION
RENAMING AN ALBUM

22
1
2
13
2Press the MENU button then select the CONFIGURATION
function,
then SOUNDS, then ACTIVATE AUXILIARY SOURCE to acti vate
the auxiliary input of the audio equipment.
Connect the portable equipment (MP3
player…) to the audio sockets (white and
red, RCA type) located in the glove box
using a JACK/RCA audio cable.
Press the SOURCE button several
times in succession and select AUX.
Insert one or more CDs in the
changer.
Press the SOURCE button several
times in succession and select
CD CHANGER.
Press one of the buttons on the
alphanumeric keypad to select the
corresponding CD.
Press one of the buttons to select a
track on the CD.
The displaying and management of the commands takes place via
the portable equipment.
It is not possible to copy the iles onto the hard d isc from the auxiliary
input.
It is not possible to copy the iles onto the hard d
isc from the
CD changer. USING THE AUXILIARY INPUT (AUX)
JACK/RCA AUDIO CABLE NOT SUPPLIED
CD CHANGER
PLAYING A CD
(NOT MP3 COMPATIBLE)
CD CHANGER