2008 CHRYSLER SEBRING SEDAN spare wheel

[x] Cancel search: spare wheel

Page 82 of 494

CHRYSLER SEBRING SEDAN 2008 3.G Owners Manual Defroster
Check operation by selecting the defrost mode and place
the blower control on high speed. You should be able to
feel the air directed against the windshield.
NOTE:If the defrost feature is n

Page 309 of 494

CHRYSLER SEBRING SEDAN 2008 3.G Owners Manual Compact Spare Tire — If Equipped
The compact spare is for temporary emergency use with
radial tires. It is engineered to be used on your style
vehicle only. Since this tire has limited tread life, t

Page 310 of 494

CHRYSLER SEBRING SEDAN 2008 3.G Owners Manual original equipped tire on the front or rear axle of your
vehicle, but it is not. Installation of this limited use spare
tire affects vehicle handling. Since it is not the same tire,
replace (or repair

Page 320 of 494

CHRYSLER SEBRING SEDAN 2008 3.G Owners Manual NOTE:
1. The compact spare tire (if so equipped) does not have
a tire pressure monitoring sensor. Therefore, the TPMS
will not monitor the pressure in the compact spare tire.
2. If you install the com

Page 323 of 494

CHRYSLER SEBRING SEDAN 2008 3.G Owners Manual If the ignition key is cycled, this sequence will repeat,
providing the system fault still exists. If the system fault
no longer exists, the Tire Pressure Monitoring Telltale
Light will no longer flas

Page 353 of 494

CHRYSLER SEBRING SEDAN 2008 3.G Owners Manual WHAT TO DO IN EMERGENCIES
CONTENTS
Hazard Warning Flasher..................353
If Your Engine Overheats.................353
▫Engine Oil Overheating — 2.4L Engine Only
(If Equipped)..............

Page 359 of 494

CHRYSLER SEBRING SEDAN 2008 3.G Owners Manual Preparations For Jacking
Park the vehicle on a firm level surface, avoid ice or
slippery areas,set the parking brakeand place the gear
selector in PARK (automatic transaxle) or REVERSE
(manual transax

Page 362 of 494

CHRYSLER SEBRING SEDAN 2008 3.G Owners Manual 1. Remove the scissors jack and lug wrench from the
spare wheel as an assembly. Turn the jack screw to the left
to loosen the lug wrench, and remove the wrench from
the jack assembly.
NOTE:The Jack Ha
Page:   1-8 9-16 next >