2008 CADILLAC ESCALADE EXT reset

[x] Cancel search: reset

Page 228 of 496

CADILLAC ESCALADE EXT 2008 3.G Owners Manual APPROACH LIGHTING
This feature allows you to select whether or not to have
the exterior lights turn on brie�y during low light
periods after unlocking the vehicle using the Remote
Keyless Entry (RKE)

Page 229 of 496

CADILLAC ESCALADE EXT 2008 3.G Owners Manual Press the customization button until CHIME VOLUME
appears on the DIC display. Press the set/reset
button once to access the settings for this feature.
Then press the customization button to scroll thr

Page 230 of 496

CADILLAC ESCALADE EXT 2008 3.G Owners Manual EASY EXIT SEAT
This feature allows you to select your preference for the
automatic easy exit seat feature. SeeMemory Seat,
Mirrors, and Pedals on page 1-6for more information.
Press the customization

Page 231 of 496

CADILLAC ESCALADE EXT 2008 3.G Owners Manual REMOTE START
If your vehicle has this feature, it allows you to turn the
remote start off or on. The remote start feature allows
you to start the engine from outside of the vehicle using
the Remote Ke

Page 232 of 496

CADILLAC ESCALADE EXT 2008 3.G Owners Manual EXIT FEATURE SETTINGS
This feature allows you to exit the feature settings menu.
Press the customization button until PRESS
VTO EXIT
FEATURE SETTINGS appears in the DIC display.
Press the set/reset bu

Page 233 of 496

CADILLAC ESCALADE EXT 2008 3.G Owners Manual Set up your audio system by presetting your
favorite radio stations, setting the tone, and
adjusting the speakers. Then, when driving
conditions permit, you can tune to your favorite
radio stations us

Page 236 of 496

CADILLAC ESCALADE EXT 2008 3.G Owners Manual To scan preset stations, press and hold the arrows for
more than two seconds until a beep sounds and PSCAN
displays. The radio goes to the �rst preset station, plays
for �ve seconds, and then goes to

Page 237 of 496

CADILLAC ESCALADE EXT 2008 3.G Owners Manual AUTOSTORE PRESETS:To set the preset stations
automatically, perform the following steps:
1. Turn the radio on.
2. Press BAND to select AM, FM1, or FM2.
3. Press the
w(tune/select) knob to enter the
ma