2008 BMW Z4 M COUPE lights

Vehicles used in competitive events
 Oil changes performed outside the recom-
mended maintenance intervals as indicated
by the Service Interval Indicator
Maintenance Upgrade Option
Please contact your authorized BMW center for
information and availability on the optional Main-
tenance Program Upgrade for coverage up to
6 years and 100,000 miles.
Intervals
Time intervals should be followed using the
maintenance interval as indicated by the BMW
Service Indicator lights on the check control
panel in the dashboard.
Maintenance intervals on motor vehicles have
conventionally been specified based upon accu-
mulated mileage. However, the type of driving
conditions has a major influence on routine
maintenance requirements; distance traveled is
only one of the significant factors. A vehicle
driven for 50,000 miles of short trips in the city
with numerous cold starts, prolonged periods of
idling, stop-and-go driving, and high engine
speeds during acceleration requires more fre-
quent maintenance intervals than a vehicle
driven for 50,000 miles for long distances at low
engine speeds primarily at operating
temperature.
The advanced technologies at BMW have led to
the development of the unique BMW service
interval indicator which computes the actual
optimum maintenance requirements based not
only upon the accumulated mileage, but taking
into account important factors such as engine
coolant temperatures, high or low engine
speeds, short or long trip driving, and number of
vehicle starts. The maintenance interval may
therefore be maximized with considerable sav-
ings to owners of vehicles subjected to light
duty.
This BMW Service and Warranty Information
Booklet should be presented to your BMW cen-
ter when maintenance is required. Your BMW
center will stamp this book documenting the
services or maintenance performed.
Maintenance Program
The Service Interval Indicator consists of a
mileage reading, and the inscriptions “OIL SER-
VICE” and “INSPECTION”.
Whenever the ignition is switched on, the dis-
play shows the next scheduled type of service
and the remaining distance until the service
should be performed. The distance is based on
your driving style.
If the maintenance interval has been exceeded,
a “--” symbol reminds you of the urgent need
for servicing. In the interests of road safety and
reliability, you should avoid driving your BMW
when the “--” symbol is showing, and have
the essential maintenance work performed with-
out delay.
After each maintenance is performed the ser-
vice indicator is reset in order to compute the
next service interval.
If the Service Interval Indicator displays an illogi-
cal reading, or if there is no display, consult a
BMW center.
If the speedometer, tachometer or coolant tem-
perature gauge should develop a fault, the ser-
vice interval indicator will probably cease to
operate correctly as well, since it depends on
correct speed, distance and temperature read-
ings. The fault must be located and rectified by
a BMW center.
A detailed list of all maintenance operations
included in each of the elements of the BMW
Maintenance Program is found on page s4-9.
These elements are as follows:
Quality Certification I will be performed by your
selling center and certified on page 4.
2

1200 Mile Service
Z4 M Coupe, Roadster
Read out diagnostic system. •
Change oil and filter while engine is at normal operating temperature. Use only
Castrol TWS Motorsport SAE 10W-60 Synthetic Oil, BMW p/n 07 51 0 009 420. •
Replace transmission fluid. •
Replace differential oil. •
Check all warning/indicator lights, check control. •
Road test with check of brakes, suspension, steering, clutch/manual transmission. •
Inspect tires, adjust tire pressure and reset Tire Pressure Monitor. •
Engine Oil Service
Engine Compartment Z4 M Coupe,
Roadster
Change oil and oil filter while engine is at normal operating temperature. Use only
Castrol TWS Motorsport SAE 10W-60 Synthetic, or Castrol Formula RS 10-60
Synthetic oil; BMW p/n 07 51 0 009 420. •
Reset service interval indicator. •
Replace microfilter. •
Check overall thickness of front and rear disc brake pads using special tool. If
replacement is necessary: Examine brake disc surfaces. Clean brake pad contact
points in calipers. Grease wheel centering hubs. Check thickness of parking brake
linings only when replacing rear pads. •
Check parking brake actuation. Adjust if necessary. •
Pre-burnish parking brake. •
5

Body/Electrical Z4 M Coupe,
Roadster
Check battery state-of-charge indicator and charge if required. •
Check lighting system, i.e.: headlights, foglights, parking, back-up, license plate,
interior (including map reading lights), glove box, flashlight, illuminated makeup
mirrors, luggage compartment lights. •
Check instrument panel and dashboard illumination. •
Check all warning/indicator lights, check control. •
Check turn signals, hazard warning flashers, brake lights, horns, headlight dimmer
and flasher switch. •
Check wipers and washer system; wiper blades, washer jet positions. •
Check condition and function of safety belts. •
Visually examine all SRS airbag units for torn covers, obvious damage or
attachment of decals, decorations or accessories. •
Check central locking/double lock. •
Check operation of all latches. •
Check heater/air conditioner blower, rear window defogger. •
Check rear view mirrors. •
Final Inspection
Road test with check of brakes, suspension, steering, clutch/manual transmission. •
Pre-burnish parking brake. •
7