2008 AUDI TT change time

Bluetooth car telephone kit29
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Enter the PIN for handsfree mode on the mobile phone
within about 30 seconds. The factory default for the PIN
for handsfree mode is 1234. A mobile phone symbol

page 28, fig. 20 will appear in the status line of the
MMI display when the mobile phone has successfully
bonded.
The external car aerial is not used. The handset* cannot be used.
Note
•Audi does not recommend using a mobile telephone with Hands-
Free Profile.
•You should change the PIN for handsfree mode to prevent other
users from connecting to your car telephone kit
page 96.
•For up-to-date information on mobile phones with the Hands-
Free Profile, please ask an Audi dealer or specialist retailer.
Applies to vehicles: with Bluetooth car telephone kit
Phone book entries
The phone book entries on your SIM card and your mobile
phone directory are automatically stored on the MMI
system.
Loading the phone book entries
The phone book entries will be loaded into the MMI automatically
when you switch on the ignition (if the mobile phone supports this
function). It may take several minutes to load the entries, depending
on how many entries are stored on the mobile phone.
The last four phone books loaded into the MMI memory remain
stored there. When you link a fifth mobile phone to the car tele-
phone kit, the phone book from the mobile phone which has not
been used for the longest time is deleted from the MMI. Up to 1255
phone book entries per phone book can be stored in the memory.
Reconnecting a mobile phone
If the SIM card is the same as before, the phone book will appear on
the MMI after a short time.
The MMI automatically checks the phone book entries in the back-
ground and will update the memory if the entries have changed.
Displaying the phone book entries
The phone book entries are displayed in alphabetical order together
with a category symbol
fig. 21, e.g. SIM card, private, business,
mobile phone or telephone symbol.
Note
•Which phone book entries are displayed on the MMI will depend
on the mobile phone you are using.
•If the SIM card is in the handset
page 31, only the SIM card
entries will be displayed.
•In certain cases, phone book entries from a mobile phone may
not be transmitted in alphabetical order. If there are too many
phone book entries, entries with certain initial letters may not be
displayed on the MMI system.
A1
Fig. 21 Phone book
entries











Basic operation 50
– Confirm the date setting by pressing the rotary push-
button.
Setting the time format
– Turn the rotary pushbutton to Time format and press the
rotary pushbutton.
– Turn the rotary pushbutton to 24h or 12h.
– Press the rotary pushbutton to confirm your adjustment.
Setting the date format
– Turn the rotary pushbutton to Date format and press it.
– To set the date format “Day.Month”, turn the rotary push-
button to DD.MM and press it.
– To set the date format “Month/Day”, turn the rotary push-
button to MM/DD and press it.
Note
If the radio-controlled clock* does not receive a signal for three
days, the time source setting will automatically be changed to the
quartz clock.
Calling up the on-board handbook
The on-board handbook includes the Owner's Manual for
your vehicle and the Operating Manual for the Infotain-
ment / MMI.
Important: The on-board handbook must be loaded into the
CD changer.
– Press the function selector button marked .– Press the control button for Handbook. The on-board
handbook will automatically load in the language that is
set under the option Menu language in the MMI

page 51.
WARNING
Not paying attention to the road traffic can lead to serious acci-
dents and loss of life.
•Only use the on-board handbook when the traffic conditions
allow you to do so safely. You must maintain proper control of your
vehicle at all times. As the driver, you bear the responsibility for
road safety.
Note
Please note that this On-board Handbook is not a substitute for the
printed Owner's Manual.
Restarting the MMI system (Reset)
You can restart the MMI system and restore full normal
operation by pressing a combination of buttons.
CAR
Fig. 42 Combination of
buttons for restart










Playing media63
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Playing media
Introduction
Your MMI system also disposes of a CD function which does not
differ at all from that of a normal CD changer. Insert an audio CD or
MP3/ WMA CD into the CD changer
page 12. You can then select
individual tracks directly, shuffle the CD tracks in random order or
play each track for just a few seconds. In addition, you can connect
a portable player (e.g. an iPod or a USB memory device) to the Audi
music interface and operate it via the MMI control console.
Activating media
Important: The MMI system must be switched on and a CD
must be inserted into the CD changer
page 12, or a port-
able player must be connected to the Audi music inter-
face*
8)
page 15.Audio source: CD
– Press the function selector button marked . The
inserted CD will then be played.
– If the list of CD tracks
page 65, fig. 57 does not appear
on the MMI display, press the control button for Source

fig. 54.
– Turn the rotary pushbutton to CD
fig. 54.
– Press the rotary pushbutton to select CD as the source.
The inserted CD will then be played.
Audio source: Audi music interface*
– Press the function selector button marked . The
tracks on the connected portable player will be played.
– If the list of tracks on a connected portable player

page 64, fig. 56 does not appear on the MMI display,
press the control button for Source.
– Turn the rotary pushbutton to Audi music interface

fig. 54.
– To select Audi music interface as the source, press the
rotary pushbutton. The tracks on the connected portable
player will be played.
Note
The playback will be interrupted by traffic announcements if the
Traffic Programme function is active
page 58.
8)Still under development at the time of printing.
Fig. 54 List of possible
audio/video sources
MEDIA
MEDIA





! 




Managing the directory85
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Turn the rotary pushbutton and select Country.
– Press the rotary pushbutton. The speller will appear on
the MMI display
page 43.
– Using the speller, enter the name of the country and
confirm your entry by turning the speller to OK and then
pressing the rotary pushbutton.
– To enter more data, select an entry space using the rotary
pushbutton and proceed as described above.
– Turn the rotary pushbutton to Store destination

page 84, fig. 79.
– Press the rotary pushbutton to store the navigation desti-
nation.
Importing a recent destination
– Turn the rotary pushbutton to select Nav. destination
(business) or Nav. destination (private).
– Press the rotary pushbutton. An entry space will now
appear
page 84, fig. 78.
– Turn the rotary pushbutton to Copy from last
destinations
page 84, fig. 78. A list of navigation desti-
nations will appear.
– Turn the rotary pushbutton to select a navigation desti-
nation.
– Press the rotary pushbutton to import the navigation
destination.
– Turn the rotary pushbutton to Store destination

page 84, fig. 79.– Press the rotary pushbutton to store the navigation desti-
nation.
All directory entries can be stored with two navigation destinations.
These navigation* destinations can be accessed via the Memory
control button (Load from directory)
page 115.
Note
You can also set a navigation destination as a top destination. Top
destinations are displayed in the navigation main menu

page 116.
Changing or copying an entry
Entries are stored in the directory as address cards which
you can change anytime.
Important: The directory must first be opened
page 80.
– Press the control button for Edit.
– To change an entry, turn the rotary pushbutton to Change
entry.
– To copy an entry, turn the rotary pushbutton to Copy
entry. The copied entry will be appended with (Copy).
– Press the rotary pushbutton. A list of entries will appear
in the MMI display.
– To select an entry from the list turn the rotary pushbutton
to mark the entry and press to confirm, or
– To find an entry, turn the rotary pushbutton to Find entry
and press to confirm. The speller will now appear on the
MMI display
page 43. You can use it to search for a
specific entry
page 82.










Using the telephone 96
Switching between calls*13)
You can switch between two phone calls (one of them will be on
hold at any given time). The MMI display shows the active call, the
call on hold and the length of time for the connection.
Press the control button for End call to end whichever call is
currently active. The call on hold will remain in the hold queue.
Conference calling*
13)
Up to five callers can take part in a conference (depending on the
network service).
Select Join conference
page 95, fig. 89 to set up a conference. The
call on hold and the active call are added to the conference.
To set up a further call, select Hold to place all the members of an
existing conference on hold. Then press the control button for
Options or the button on the control console to close the
Options menu. Now enter a telephone number using the speller

page 90, fig. 83. Select OK or Dial to start dialling. To add this
caller to the existing conference, select Conference.
Select Resume if you want to retrieve all callers of an existing
conference from the hold queue. The Show conference participants

page 95, fig. 90 option allows you to display the callers.
Note
•The option Call waiting must be activated for you to be made
aware of incoming calls during a conversation
page 97. This
option depends on your mobile network service provider.
•The options available during a call may vary depending on the
mobile network service provider.
Applies to vehicles: with Bluetooth car telephone kit
Telephone settings
– Select: Function selector button > function selector
button > Telephone settings.
Set ring tone*14)
The selected ring tone is played and is stored when you close the
submenu.
Bluetooth settings*
•Search for mobile phone*14) - to find and list any Bluetooth
mobile phones within range.
•Bluetooth devices - to display a list of Bluetooth devices bonded
to the MMI system. The Bluetooth symbol marks the Bluetooth
device which contains the SIM card and which is actively connected.
•Delete ext. Bluetooth dev. - to delete all bonded mobile phones.
Bonded handsets* (e.g. “AUDI BTHS”) have to be deleted one at a
time. To delete bonded Bluetooth devices one at a time, choose a
device and select Delete this device.
•Bluetooth name - to change the name of the vehicle base station
on your car telephone kit (“AUDI BTA”).
•PIN for handsfree mode15) - to change the factory default (1234).
This PIN number has to be entered when you bond a mobile phone
with the Hands-Free Profile
page 28.
•Discoverability - to switch the car telephone discoverability on or
off. This setting determines whether the vehicle base station can be
detected by a mobile phone or handset*. If you select auto, the
vehicle base station can be discovered by mobile phones or the
handset* for a period of about five minutes while the car is
stationary and the key is in the ignition. Discoverability is switched
off after this period. Mobile phones which have already been
bonded can connect via Bluetooth even when discoverability is
RETURN
14)Applies to mobile phones with SIM Access Profile.15)Applies to mobile phones with Hands-Free Profile.
TEL
SETUP





!




Using the telephone 98
•off - a number is not redialled automatically if the line is
engaged.
Auto call answer
•on - an incoming call is answered automatically shortly after it is
received.
•off - an incoming call is not answered automatically.
Note
The call options depend on your mobile network service provider.
Applies to vehicles: with Bluetooth car telephone kit
Security settings
– Select: Function selector button > function selector
button > Security settings.
Automatic PIN recognition
•on - to save the PIN code of the SIM card the first time you enter
it on the MMI. In this case, you don't have to enter the PIN code
every time your mobile phone reconnects via Bluetooth. You can
save the PIN codes of four different SIM cards on the MMI.
•off - to delete all PIN numbers already stored on the MMI.
PIN query
•Activate PIN query - the telephone system asks for the PIN every
time you switch it on. If Automatic PIN recognition is activated, the
system does not ask you to enter the PIN explicitly.
•Deactivate PIN query - the telephone system does not ask for the
PIN when you switch it on. The Automatic PIN recognition setting is
ignored in this case. Some SIM cards do not allow the PIN query to
be deactivated.Changing PIN code
First enter the existing PIN code for your SIM card. The PIN can only
consist of numbers from 0 to 9. The new PIN has to be entered twice,
as a precautionary measure, and is stored on the SIM card.
If you change the PIN when the SIM card is in a connected mobile
phone with SIM Access Profile, you will have to enter the PIN again
on the mobile phone after the Bluetooth connection between the
car telephone kit and the mobile phone is terminated. Otherwise
you will not be available.
Call barring
The call barring function requires a password. You can obtain the
password from your mobile network service provider.
•Bar outgoing calls - to set up access restrictions for outbound
calls.
•Bar incoming calls - to set up access restrictions for inbound
calls.
•Deactivate call barring (all) - to cancel all restricted access
settings.
Note
The call barring options depend on your mobile network service
provider.
Applies to vehicles: with Bluetooth car telephone kit
Mailbox number
– Select: Function selector button > function selector
button > Mailbox number.
Enter the mailbox number using the speller and select OK to store it.
To delete the mailbox number, select Del in the speller and confirm
with OK.
TEL
SETUP
TEL
SETUP










Using the telephone101
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control Options
20)
The following functions are available under Options when you open
a text message to read it:
•Delete - to delete the open text message.
•Call - to dial the number of the person who sent the text
message.
•Extract number - to copy a telephone number contained in the
open text message into the speller for editing.
Note
•A crossed-out envelope symbol in the status line indicates that
there is not enough memory space available for new text messages.
In this case, you will have to delete one or more text messages from
the SIM card before you can receive further text messages.
•You can write and send text messages using the handset*

page 154.
Other settings for the phone pre-
installation
Applies to vehicles: with phone pre-installation
Options during a call
Important: You must be talking on the phone
page 90.
– Select: Control button Options > Mike off.
Switching microphone on/off
Your caller cannot hear your private conversations when the micro-
phone is off. You can still hear the caller. Mike off appears in the
MMI display.Replacing a call
If you are already talking on the phone when someone else calls, the
options Replace and Ignore will appear on the MMI display.
If you select Replace, the active call will be replaced by the incoming
call. If you select Ignore, the incoming call will be declined.
The display in the MMI may remain for several seconds afterwards
(depends on your type of phone). Should you use the function
Replace or Ignore in the MMI system during this time, it is possible
that the current call will be ended.
Note
The option Call waiting must be activated on your mobile phone for
you to be made aware of incoming calls during a conversation. The
call options depend on your mobile network service provider.
Applies to vehicles: with phone pre-installation
Telephone settings
– Press the > buttons on the MMI control
console and select Telephone settings on the MMI.
Bluetooth settings
•PIN for handsfree mode - to change the factory default (1234).
This PIN number has to be entered when you bond a Bluetooth
mobile phone with the Hands-Free Profile to the on-board phone
system
page 22.
•Remove Bluetooth devices - to delete all bonded mobile phones.
Default settings
The on-board phone system is returned to the factory defaults. This
will delete your user data, including the phone books stored in the
memory
page 23, any bonded Bluetooth devices
page 22 and
your mailbox number.
TELSETUP










Navigation 104
Navigation
Applies to vehicles: with navigation system
Introduction
Let the “Global Positioning System” (GPS) guide you to
your destination.
Wasting time studying confusing maps and tediously planning
routes are things of the past! Now you can simply enter your desired
destination into the navigation system, and the route guidance will
guide you directly to it. You can also set up to three stopovers on the
way to your destination.
The route guidance will be transmitted in the form of spoken cues
that will inform you in good time of any necessary turns, stops etc.
In which language would you like to hear the route guidance? You
can select any of the following languages: German, English, French,
Italian, Portuguese, Spanish or Dutch. You can have the last route
guidance cue repeated by pressing the right-side thumbwheel on
the multi-function steering wheel
page 137.
A detailed route map is displayed on the MMI screen
page 110.
You can also receive information on your route via the driver infor-
mation system
page 111.
If you do not want to follow a certain route guidance cue, no
problem! The navigation system will re-calculate the route from the
current location of the vehicle. In addition, if the dynamic navigation
function is activated, the navigation system will even take into
account traffic reports so that you can reach your destination even
faster.
If the vehicle is located in a place that cannot be identified by the
software (e.g. car park), a speech cue will inform you of this.
WARNING
•Today's driving conditions require the full attention of drivers.
Please see
page 9, “Notes on traffic safety”.
•Pay attention to traffic rules when driving.
•The route calculated by the navigation system is a recommen-
dation of how best to reach a destination. Pay attention to traffic
lights, no stopping signs, lane change restrictions, one-way
streets, etc.
Caution
•Should the navigation directions contradict the current traffic
regulations, you must always follow the traffic regulations.
•The volume should only be set at a level which enables you to
hear distant police and emergency vehicles clearly - failure to do so
could result in an accident.
Note
•Snow or other obstructions on the GPS aerial or interference
caused by trees or large buildings could affect the reception of the
satellite signals and make positioning difficult. GPS reception and
vehicle positioning can also be adversely affected by deactivation or
a malfunction of several satellites.
•Street and town names can change, therefore the names stored
on the DVD can in some cases be different from the names that have
since been changed.
•The navigation DVDs can only be purchased from Audi dealers.
They can also provide you with information on the most recently
updated navigation DVDs.