2008 AUDI S8 warning

IIJIL--_C_ l_
e _a _n_ in_g=.. a
_ n_d___, p'--- ro_ t_e _c_ t_ i_o _n _____________________________________________ _
Plastic and vinyl
Plastic needs special care.
Use a clean, damp cloth or spong e to remove dust and light surface
dirt. For other soil, use a lukewarm all -purpose cleaning solution or
a mild saddle soap for vinyl trim. Remove water spo ts and traces of
soap with a clean, damp cloth or sponge. Use a clean, soft cloth to rub dry .
Grease, tar or oil stains can be removed with a clean cloth or sponge
soaked with all-purpose cleaner or with a solvent designed espe­
cially to clean vinyl.
Occasionally apply a colorless vinyl or leather preservative to retain
the material's luster and pliability .
& WARNING
Always read and heed all WARNINGS and other information
~ page288. •
Aluminum trim
Use only neutral-pH products to remove spots and deposits from
aluminum surfaces. Chrome care products and alkaline cleaners
will attack aluminum surfaces and can damage them over time.
& WARNING
Always read and heed all WARNINGS and other information
~ page 288 . •
Touch-up paint
Minor paint damages should be touched up immediately.
-Use either a touch-up paint stick or spray paint to cover
minor scratches and nicks.
Your Audi dealer has touch-up paint for minor scratches and stone
chips . Scratches should be touched up soon after they occur to
prevent corrosion.
If a spot starts to rust, however, a simple touch-up job will not be
enough. The affected surface must be sanded smooth and coated
with an anti-rust primer before the painted finish can be restored.
The number for the original vehicle paint can be found on the
vehicle identification
label~ page 374.
& WARNING
Always read and heed all WARNINGS and other information
~ page 288. •
Windows
Clear vision to all sides.
Clean all windows regularly to remove road film and car
wash wax buildup.
-Remove snow from windows using a brush.
-Use a plastic ice scraper to remove ice from windows and
mirrors.
-Remove other residue on the windows with a spray-on
glass cleaner.
-Wipe the windows dry with a clean piece of cloth or
kitchen paper towel.

_____________________________________________ C_ l_ e _a_ n_ in~ g_a
_ n_d_ p_ r_ o_ t
_ e_ c_t _io _ n __ ffllll
•
The best way to remove snow from windows and mirrors is to use a
brush. Use a non -abrasive
plastic ice scraper -better still, a spray
deicer -to remove
ice from windows and mirrors .
Oil, grease or silicone residue can be removed with
glass cleaner or
silicone remover . However, wax residue requires the use of a
specially formulated solvent. Please contact your Audi dealer for
advice on safe products for wax removal.
Windows should also be cleaned on the inside at regular intervals .
Never dry windows with the same chamois that you use to dry
painted surfaces . Wax residue on the chamois can impair vision
through the windows.
& WARNING
• Always read and heed all WARNINGS and other information
=> page 288 .
• The windshield must not be treated with water-repellent mate­
rials . They can increase glare under poor visibility conditions such
as wetness, darkness, or when the sun is low on the horizon. In
addition, they can cause the windshield wipers to chatter.
0 Note
• Never use warm or hot water to remove snow and ice from
windows and mirrors. This could cause the glass to crack.
• To prevent damage to the wires of the rear defogger, do not place
any adhesive stickers on the inside of the rear window over the
wires .
• To help prevent dirt from scratching the window, always scrape
in a forward direction -pushing the scraper away from you -never
back and forth. •
Weatherstrips
Complete car care includes the weatherstrips as well.
-Apply a suitable rubber conditioner to the weatherstrips
from time to time.
To be able seal properly, the weatherstrips around the hood, doors,
rear lid, etc . must remain pliable. Spray the weatherstrips with sili­
cone or coat them with talcum powder or glycerine to retain the
flexibility of the rubber and to protect them against freezing in the
winter.
& WARNING
Always read and heed all WARNINGS and other information
=> page 288.
[ i ] Tips
Keep silicone sprays off the windshield to avoid wiper smear in
rain. •
Cast (light) alloy wheels
Cast (light) alloy wheels require special care.
-Wash the wheels with a sponge or hose brush every
other week.
-For deep cleaning afterwards, use only a dedicated acid­
free cast alloy wheel cleaner.
-Rub a coat of liquid wax onto the rims every three month.
Be sure to reach and treat all parts of the rim.
To preserve the decorative appearance of the cast alloy wheels,
some special care is necessary . In addition to road dirt and salt,
Vehicle care

___ C_ le_ a_n _i_n ~g _ a_ n_ d
__ p_r _o _t _e _c_ t_ i_o _n ___________________________________________ _
brake dust is also corrosive. If left on for too long, brake dust can
cause pitting.
Use on ly specia l
acid-free cleaners formu lated for a lloy r ims . Safe
products are availab le at your Audi dealer. Never leave the cleaner
on the ri ms longer than specified on the label. If not rinsed off
promptly, the acid contained in some c leaners can attack the
threads o n the wheel bo lts .
Never use abrasive or metal po lishing c leaning agents . If the protec ­
t ive coating has been chipped, e.g . by kicked up road dirt, touch i t
up as soon as possible .
& WARNING
• Moisture and i ce on b rake s ma y affe ct b raking effi ciency
=> page 270 , "General information ". Te st the brakes carefully ea ch
t ime you wa sh the vehi cle .
• Alway s read and heed all WARNINGS and other information
=> page 288. •
Body cavity sealing
The body cavity sealing does not nee d to be checked.
A ll body cavit ies which could be affected by corrosion have been
t horough ly pr otected a t the factory .
This sealing does not require any inspection or additional treat ­
ment . If any wax should seep out of the cavity when the ambient
temperature is high, it can be removed with a plastic scraper and a suitable solvent .
& WARNING
Solvents can be d angerous.
• Ben zine is flammable and to xic . If you use benzine for removing
the wax , keep sparks, flame and lighted cigarettes away . Never
& W AR NING (continued )
dump benzine on the ground , into ope n streams or do wn sew age
drain s.
• Be sure to observe all safet y and env ironmental regulat ions .
Follow all in struction s on the cont ainer .
• Alway s read and heed all WARNINGS and other information
=> page 288 . •
Chassis
Hav e the underc oating c hecked for damage from tim e to
time.
T he lower body shell of your Audi is also thoroughly protected
against corrosion .
Any damage to the undercoat ing caused by road hazards s hou ld be
repaired promptly.
& WARNING
Too much undercoating in the wrong place s can cau se a fire .
• Do not appl y additional undercoating or rustproofing on or
near the exhaust manifold , exhau st pipes , catalytic converter or
h eat shield s. Wh ile dr iving , the sub stan ce used for underco ating
could overheat and cau se a fire .
• Alway s re ad and heed all WARNINGS and other info rm ation
=> page 288 . •

_____________________________________________ C_ l_ e _a_ n_ in~ g_a
_ n_d_ p_ r_ o_ t
_ e_ c_t _io _ n __ ffllll
•
Care of interior
MMI display
- Clean the MMI display with a soft c lean clo th and an LCD
c le ane r.
The MM I disp lay can be c leaned with a pr ofessional ly available "LCD
cleaner". The cloth should be s lightly dampened with the c leaning
fl uid to clean the display.
0 Note
To avoid scra tc h ing the MMI display, you should never c lean it dry .•
MMI terminal
- First clean the MMI terminal with a brush to remove dust
from the housing.
- T hen wipe the MMI terminal with a clea n, soft, s lig htly
damp cloth .
The MMI terminal should be c leaned with a brush first so that no
d irt is trapped between the buttons and t he housing. We reco m­
mend giving the MMI terminal a final wipe with a c loth moistened
with water a nd dish was hing detergent.
0 Note
To prevent damage, make sure that no flu id ever gets i nto the M MI
terminal.
•
Aluminum trim
U se on ly neutral-pH products to remove spots and deposits from
a lum inum surfaces . C hrome care products a nd alka line clea ners
wi ll attack aluminum surfaces and can damage them over time.
& WARNING
Always read and heed all WARNINGS and other informat ion
=> page 288 . •
Fabrics and fabric coverings
Fabrics and fabric coverings (e.g . seats, door trim pane ls, etc.)
shou ld be c leaned at regular intervals with a vacuum cleaner . This
re moves surface dirt partic les which could become embedded in
the fabric through use. Steam cleaners shou ld not be used, because
the steam tends to push the d irt deeper into the fa bric and lock it
there.
Normal cle aning
Genera lly, we recommend using a soft sponge or a lint -free
m icrofiber c loth to the clean fabric . Brushes should only be used for
carpets and floor mats, since other fabric surfaces could be harmed
b y b rushes.
Norma l surface stains can be cleaned using a commercially avail­
able foam cleaner. Spread the foam on the surface of the fabric with
a soft sponge and work it in gent ly. Do not saturate the fabric . T hen
pat the foam dry using absorbent, dry cloths (e.g. microfiber cloth)
and vacuum it a fter it has dr ied completely .
Cleaning stains
Stains caused by beverages (e.g. coffee, fruit juice, etc.l can be
treated with a mild detergent so lution . Apply the detergent so lution
with a sponge. In the case of stubborn stains, a detergent paste can be applied direct ly to the stain and worked into the fabric. After-.,_
Vehicle care

___ C_ le_ a_n _i_n ~g _ a_ n_ d
__ p_r _o _t _e _c_ t_ i_o _n ___________________________________________ _
wards, use copious amounts of clean water to remove the
rema ining detergen t. App ly the water with a damp cloth or sponge
and pat the fabric dry with an absorbent, dry c loth .
Stains from chocolate or makeup should have detergent paste (e.g .
ox -ga ll soap) rubbed into them. A fterwards, remove the soap w ith
water (damp sponge).
A lcohol can be used to treat stains from grease, o il, lipstick or a ba ll­
point pen . Melted grease or dye must be patted off using absorbent
mater ial. It may be necessary to retreat the areas w ith de tergent
paste and water .
In the case of genera l soiling of the upho lstery and cover material,
we recommend h iring a spec ialist that has the equ ip m ent to c lean
the seat covers and other fabric surfaces by shampooing and spray
extraction .
& WARNING
Always read and heed all WARNING S and the information
=> page 288 .
[ i] Tip s
Open Ve lcro fasteners on your clothing can damage the seat cover.
Please make sure that Velcro fasteners a re c losed .•
Plastic parts and instrument panel
A lways use a c lean cloth mo istened in clear water to clean these
areas . For persistent dirt use an Audi approved solvent-free plastic
cleaner/protectant .
& WARNING
Solvents can ch ange the propertie s of some plasti cs and make it
harder for the airbag to deploy.
& W AR NING (continued )
• Never clean the instrument panel or the surface of airbag
module s with cle aning pr oduct s that contain sol vent s.
• Product s containing solvent s will make the surface of this part
porou s.
• Seriou s injurie s can result if plastic parts come loo se when the
a irbag i s deployed .
• Alway s re ad and heed all WARNING S and other information
=> page 288.
0 Note
Cleaning agents containing solvents wil l attack the material and can
change the way it behaves .•
Ap plies to vehicles : w ith natu ra l l eathe r
Natural leather
Audi makes great eff orts to maintai n the properti es,
n at ural look and feel of interior leather.
General
We offer many different types of leat her on our veh icles . M ost are
different types of nappa leather, which has a smooth surface and
comes in va rious co lors .
T he intens ity of the color determines the visua l c h aracteristics and
appearance. If the surface of the leather has a typica l natural look,
then t he leat her is a nappa leather that has been left in a re lative ly
natural condition. This leather offers particu lar ly good comfort and
breathes well. F ine ve ins, closed gra ins, insect bites, skin folds, and
subt le variations in color remain visib le. These characterist ics
dem onstra te that the material is natura l.
Natura l nappa leather is not covered by a color fin ish . It is therefore
more sensitive to soiling and wea r, which is something you need to
.,.

___ C_ le_ a_n _i_n ~g _ a_ n_ d
__ p_r _o _t _e _c_ t_ i_o _n ___________________________________________ _
Cleaning spots
- Remove fresh water-based spots (such as coffee, tea,
juices, blood) with an absorbent cloth or paper towel.
- Remove fresh
grease or oil-based spots (such as butter,
mayonnaise, chocolate) with an absorbent cloth or paper
towel, or use the cleaner from the leather care kit if the
spot has not yet penetrated into the surface of the
leather.
- Use an oil/grease dissolving spray, if
oil/grease spots
have dried on.
- Remove specific kinds of spots (ballpoint pen, felt
marker, fingernail polish, water-based paint, shoe polish,
etc.) with a spot
remover specifically formulated for
leather.
Leather care
- Every half year use an approved leather care product
(available from your Audi dealer) to care for the leather.
- Apply the product
very sparingly.
- Wipe it off with a damp cloth.
If you have any questions abou t cleaning and caring for the leather
in your vehicle, it is best to contact your authorized Audi dealer, who
will be glad to help you and tell you about our full range of leather
care products, such as:
• Leather cleaning and care kit
• Creams to care for colored leather
• Spot removers for ballpoint pens, shoe polish, etc .
• Oil/grease dissolving spray
• New and upcoming products.
& WARNING
Always read and heed all WARNINGS and other information
~ page 288.
0 Note
• Never use chemical solvents (e.g. lighter fluid, turpentine),
waxes, shoe polish or similar products on the leather surfaces in
your Audi .
• To avoid damage, have s tubborn stains removed by a commer­
cial cleaning specialist. •
Applies to ve hicles: w ith Alc a nt ara up ho lst ery
Cleaning Alcantara ® (synthetic suede)
Removing dust and dirt
- Moisten a cloth, squeeze out excess water and wipe down
the seat surfaces.
Removing stains
- Moisten a cloth with lukewarm water or with diluted
ethyl (rubbing) alcohol.
- Dab at the stain. Start at the outside and work inwards.
- Once the stain is no longer visible, use a soft dry cloth or
tissue to soak up the moisture .
Do not use leather cleaning products on Alcantara .
You may use a suitable shampoo for removing dust and dirt.
Dust and grit in the pores and seams can scratch and damage the
surface . If the car is left standing in the sun for long periods , the
leather should be protected against direct sunlight to prevent it
...

_____________________________________________ C_ l_ e _a_ n_ in~ g_a
_ n_d_ p_ r_ o_ t
_ e_ c_t _io _ n __ fflll
•
from fading . Slight color variations will develop in normal use and
are not an indication of material deterioration.
0 Note
• Never use chemical solvents (e.g. lighter fluid, turpentine),
waxes, shoe polish or similar products on Alcantara® surfaces.
• To avoid damage, have stubborn stains removed by a commer­
cial cleaning specialist.
• Do not use brushes, stiff sponges or similarly abrasive cleaning
aids. •
Safety belts
Only well-maintained safety belts work reliably when
needed.
- Keep belts clean.
- For cleaning, use a mild soap and water solution. Let
belts dry thoroughly and away from direct sunlight.
- Do not allow inertia reel safety belts to retract before
they are completely dry.
- Check the condition of your safety belts
regularly.
Heavily soiled safety belts may not retract properly.
& WARNING
Damaged safety belts can break in a crash.
• Anything that might damage your safety belts could mean that
you and your passengers would not be adequately protected in an
accident.
• Safety belt performance depends on correct installation. Never
remove belts from the vehicle to clean them.
&, WARNING (continued)
• Do not use chemical cleaning agents, bleach or dyes. They have
corrosive properties which weaken the webbing.
• When cleaning your safety belts, inspect them for damage. If
you discover damage, see your Audi dealer.
• Always read and heed all WARNINGS and other information
=> page 288. •
Engine compartment
Be especially careful when cleaning the engine compart­
ment.
Always switch off the ignition before cleaning the engine => &,.
Plenum panel
Remove leaves from the plenum panel in front of the windshield
under the engine hood. This prevents the water drain holes from
becoming blocked, and it prevents debris from entering the vehicle
interior through the heating and ventilation ducts.
Corrosion protection
The engine compartment and transmission have been corrosion­
protected at the factory.
Good anti-corrosion treatment is very important, particularly in the
winter. If the vehicle is frequently driven on salt treated roads, the
entire engine compartment and plenum panel should be thor­
oughly cleaned at the end of winter and retreated to prevent salt
damage. At the same time, the underside of the vehicle should be
washed as well.
If the engine compartment is cleaned at any time with grease
removing solutions
11 , or if you have the engine washed, the anti­
corrosion treatment is almost always removed as well. It is therefore .,_
11 Use only the correct cleaning solut ions. Never use gasoline or diesel fuel.
Vehicle care

___ C_ le_ a_n _i_n ~g _ a_ n_ d
__ p_r _o _t _e _c_ t_ i_o _n ___________________________________________ _
essential to have a long -lasting corrosion protection reapplied to al l
su rfaces, sea ms, joi nts a nd compo nents i n th e eng in e c om pa rt ­
m ent .
& WARNING
Be aware: The engine compartment of any motor vehicle is a
potentially hazardous area.
• Before working in the engine compartment, be sure to read the
information
::::> page 299.
• Before reaching into the front plenum panel, always remove the
ignition key . Otherwise, the windshield wiper system could unin ­
tentionally be switched on , possibly causing personal injury from
the moving wiper linkage .
• Never reach into the area around or touch the radiator fan . The
auxiliary fan is temperature controlled and can switch on suddenly
-even when the ignition is off.
• Do not wash, wax or dry the engine with the engine running .
Moving or hot parts could injure you.
• Do not clean the underside of the chassis, fenders, wheel
covers, or other hard to reach parts without protecting your hands
and arms. You may cut yourself on sharp-edged metal parts .
• Always read and heed all WARNINGS and other information
=> page 288 . •