Tires and wheels 11111 --------------------------------------------
•
Wheel bolts
Wheel bolts must al wa ys be tightened to the correc t
tor que .
The design of wheel bo lts is matched to the factory installed rims. If
di fferent r ims a re fitted, t he co rrect w heel bo lts wi th the rig ht len gth
and correct ly shaped bolt heads m ust be used. This ensures that
w he els a re fitt ed se cu rel y and that t he bra ke syste m functi on s
correctly.
In certa in ci rc ums ta nces, yo u may no t use wheel bo lts fr om a
differ ent vehicle - eve n if it is the sa me
model=:> page 382.
& WARNING
Improperly tightened or maintained wheel bolts can become loose
causing loss of control, a collision and serious personal injury.
• Always keep the wheel bolts and the threads in the wheel hubs
clean so the wheel bolts can turn easily and be properly tightened .
• Never grease or oil the wheel bolts and the threads in the wheel
hubs. They can become loose while driving if greased or oiled,
even if tightened to the specified torque .
• Only use wheel bolts that belong to the rim being installed .
• Never use different wheels bolts on your vehicle.
• Always maintain the correct tightening torque for the wheel
bolts to reduce the risk of a wheel loss .
If the tightening torque of
the wheel bolts is too low, they can loosen and come out when the
vehicle is moving . If the tightening torque is too high, the wheel
bolts and threads can be damaged and the wheel can become
loose .
0 Note
The specified torque for the wheel bo lts is 9 0 ft lb (12 0 N m) with a
t olerance o f± 7,4 ft lb(± 10 Nm). T orque whee l bolts diago nally.
After changing a whee l, the torque must be checked as soon as possible with a torque wrench
-preferably by an authorized Audi
dea ler o r qua lif ied wo rksho p.•
Low aspect ratio tires
You r Aud i is fact ory- eq uip pe d w it h lo w aspect rati o tire s. T hese tir es
hav e been thorough ly t ested and been se lect ed specifical ly for your
mod el for thei r supe rb pe rf or manc e, r oad f eel an d ha nd ling under
a variety of driving conditions. As k your authorized Audi d ealer for
m or e de tails.
The low aspect rat io o f th ese t ires is indicat ed by a nume ra l of 55 or
less in the tire's size designatio n. The numeral represents the ratio
o f t he tir e's s idewa ll he ig ht in r ela ti on to it s tread w idt h ex pressed
in percentage . Conventiona l tires have a height/width ratio of 60 or
more.
The performan ce of low -aspe ct-ratio tires is particularly sensitive to
improper inflation pressure . It is therefore important that low
aspect ratio tires are inflated to the specified pressure and that the
inflation pressure is regularly checked and maintained . Tire pres
sures should be checked at least once a month and alway s before a
long
trip :::::, page 331, "Checking tire pressure" .
What you can do to avoid tire and rim damage L ow a spect ratio tires can be damaged mo re easily by impact with
pot ho les, cu rbs, gull ies o r ridge s o n th e road, part icular ly if th e tire
is underinf lated .
I n or der to mini mize th e occurren ce of i mpac t da mag e to the tires
of your vehicle, we recommend that you observe the fol lowing
pr ecaut ions :
• Alwa ys m aint ain recom mended inflatio n pressu res . C he ck you r
t ire p res su re eve ry 2,000 mi les (3, 000 k m) and add ai r if neces sary .
• D rive carefully on roads with potho les, deep gullies or ridges .
The impac t from d riving th rough or ove r such o bstacles can
da mage you r tir es . Imp act with a curb may a lso caus e damage to
your tire s. .,_
Vehicle care
___ D_ a_ ta ______________________________________________________ _
Data
Applies to vehicles: with 8 -cylinder engine and all wheel drive
350 hp, a-cylinder engine, with all wheel drive
Engin e da ta
Max imum output SAE net
Maximum torque SAE net
No . of cy linders
Disp lacement
Stroke
Bore
Compress ion ratio
Fuel
Dimension s (appro x.)
Length (with licence plate bracket)
Width (across mirro rs)
He ight (un loaded)
T urning circle diameter (curb to curb)
Capa citie s (a pprox.)
Fuel t ank
-Total capacity
- Reserve (of total capacity)
Wind shi eld and h eadlight wa sh er fluid contain er
Engine oil
with filter change hp@ rpm
lb -ft@ rpm
CID (cm
3 )
in (mm)
in (mm)
350@ 6800
325 @3500
8 cylinder
254 (4163)
3.65 (92.8)
3.33 (84.5) 12.5: 1
Premium unleaded (91 AKII Recommended fo r maximum engine per formance . Fur
ther
details ::::;, page 307, "Gasoline"
in (mm)
in (mm)
in (mm)
ft. (ml
A8 = 199.3 (5062)
AB = 79 .8 (2028)
A8 = 56.9 ( 1444)
AB = 41.0 (12.5)
gal (liters)
gal (liters)
quarts (liters)
quarts (liters)
A8 L = 204 .4 (5 192)
AB L = 79 .8 (2028)
A8 L = 57.3 (1455)
A8L =41.7(12.7)
23.8 (90.0)
2.4 (9 .0)
5.1 (4.8)
9.3
(8.8) •
_____________________________________________________ D_a_ t_ a __ llJIII
App lies to veh ic les: w it h 12-cy linder eng ine and a ll whee l dr ive, lon g wheel base (LW B)
450 hp, 12-cylinder engine, with all wheel drive, long wheel base
En gin e data
Maximum output SAE net
Maximum torque SAE net
No. of cy linders
Displacement
Stroke Bore
Compression ratio Fuel
Dim ension s (appro x.)
Lengt h (wi th lice nce p late bracket)
Width (ac ross mirrors)
Height (unloaded)
Turning circle diameter (curb to cu rb)
Ca pac itie s (a pprox.>
Fuel tank
-Total capac ity
-Reserve (of total capacity)
Windshield and headlight washer fluid container
Engine oil
with fi lte r change hp@rpm
lb-ft@ rpm
CID (cm
3l
in (mm)
in (mm) 450@ 6200
428 @ 4000-4700
12 cy linder
366 (5998)
3 .55 (90 .2)
3 .3 1 (84 .0)
1 1.0 : 1
Premium unleaded (91 AKI! Recommended for maximum engine performance . Fur
t her
de tails => page 301, "Gasoline"
i n ( mm)
in (mm)
in (mm)
ft. (ml 20
4.4 (5192)
79.8 (2028)
57 .3 (1455)
41.7 (12 .7)
gal (liters)
gal (liters)
quarts (liters)
quarts (liters ) 2
3 .8 (90 .0)
2 .4 (9 .0)
5.1 ( 4.8)
13 .2 (1 2 .5)
•
Controls and equip
ment Safety first Vehicle operation
Vehicle care Do-it-yourself service Technical data
