2008 AUDI S6 display

Table of contents
Do-it-yourself service ... 335
What do I do now? . . . . . . . . . . . . . 336
Trunk escape handle . . . . . . . . . . . . 336
J ack, tools and spare wheel . . . . . . 336
Changing a whee l . . . . . . . . . . . . . . 338
Fuses and bulbs . . . . . . . . . . . . . . . . 345
Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . 345
Bulbs ................... •...... 349
Em erge ncy s itua tions . . . . . . . . . . 351
Genera l ... ... ... ..... .... .. .... 351
Starting by pushing or towing . . . . 351
Start ing with jumpe r cab les . . . . . . 351
Use of junipe r cab les . . . . . . . . . . . . 352
E mergency tow ing with commerc ia l
t ow truck . . . . . . . . . . . . . . . . . . . . . . 354
Lifting vehicle . . . . . . . . . . . . . . . . . . 356
Technical data
General in format ion
Explanat ion of t echnical data ... .
Vehic le iden tif ic ation .... ....... .
Display ing Vehic le Identification
Number in the MMI ..... .. .. ... . 359
360
360
360
361 Weights . .
. . . . . . . . . . . . . . . . . . . . . 361
Dimensions . . . . . . . . . . . . . . . . . . . . 362
Data . . . . . . . . . . . . . . . . . . . . . . . . . . . 363
255 hp, 6-cylinder eng ine
363
350 hp, 8-cylinder engine . . . . . . . 364
Co ns umer In forma tion . . . . . . . . . 365
War ranty coverages ......... .. .
Reporting safety defects ....... .
Operating your vehicle outs ide the
U.S.A . or Canada .............. .
Audi Service Repa ir Manuals and
Liter ature ..................... .
Main tenance .............. ... .
Additional accessories ,
modif icat ions and parts
rep lacement ............... ... . 365
365
365
366
366
368
Alphabetical index
. . . . . . 371

About this Own er's M anu al
About this Owner's Manual
This owner's manual contains important information, tips, sugges­
tions, and warnings for the use of your vehicle.
Make sure that this owner's manual is always located in the vehicle .
This is especial ly important if you allow other people to drive the
veh ic le, or if you sell it.
This owner's manua l describes the
equ ip m ent r an ge specified for
this model at the editorial deadline date. Some of the equipment
descr ibed here will only be availab le at a later date, or only in
specific markets.
Some sections in this owner's manual do not apply to all veh icles.
In that case, the
range of appl icability is giv en at the beginning of
the section, e.g . "Appl ies to veh icles : with Audi Parking System". In
addition, optional equipment is indicated by an asterisk" *".
The deta ils in the
illu strations may be different from those in your
veh ic le, and are intended to be viewed as a bas ic guide .
You wil l find a
table of content s at the beginning of this book, which
displays all topics descr ibed in this manua l in order of appearance .
You wil l find an alphabetical
inde x at the end of this book.
All
dir ection s, such as "left", "right", "front", "back", are re lative to
the direction of trave l.
* optiona l equipment
.,. This section continues on the next page .
a Indicates the end of a section .
® Registered tradema rks are identified with a®. If this symbol is
m issing, it is no guarantee that the terms can be used freely.
=> &. Cross -reference to a "WARN ING! " within a section . For indi ­
cation with a page number, the corresponding "WARN ING!" can be
found outside of the section .
& WARNING
Text w ith thi s symbol cont ains impo rtant inform ation on saf ety
and how to reduce the ri sk of personal injury or death .
0 Note
Text with this symbol draws your attention to potent ial sources of
damage to your veh ic le.
W For th e sake of the environment
Text with this symbol contains in fo rmation about the environment
and how you can he lp protect it.
[ i ] Tips
Text with this symbol contains specia l tips and other information
about getting the most out of your vehicle and i ts features .•

Instruments and controls
General illustration
G)
0
©
©
©
©
0
©
Power window switches .. ...... .... ... .. ...... . .
Door handle
Memory buttons (driver's seat)
Power locking switch ................ .......... .
Adjuster control for outside mirrors .. .... .. .. ... . .
Air outlets ..... .. .. . ... .... .... .. . ..... ... .... .
Light switch ...... ....... .. .... .... .... .... ... .
Control lever for :
- Turn signal and high b eam .......... ...... ... .
- Lane assist .... .... ... .... .... .... ... .... ... .
G) Control lever for:
-Cruise control .... ... .. .. ... ... .. .... .... ... .
- Adaptive Cruise Contro l .. .. .... .... .......... .
@ Multifunction steering wheel with:
- Horn 63
91
56
83
118
70
74
150
132
135
- Driver's airbag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
- Shift buttons ..................... ... .... .... 158, 165
- Button for steering wheel hea ting . . . . . . . . . . . . . . 115
@ Instrument cluster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
@ Switches for
@
@
-Windshield wiper /washer ....... .... .... ... ... .
- Trip computer ..... .. .... .... ...... ....... .. .
St eering lock/ignition /starter sw itch
Buttons for
Reset button for trip odometer ... .. .... .... ... .
- !CHECK] .. ... ... ..... ...... ........ ... .. ... .
78
40
124
15
16
- Instrument lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Controls and equip ­
ment
Instruments and controls
@ MMI Display
@ Depending on equipment , switches for:
- Elect ronic Stabilization Program (ESP)
- Emergency flashers .. ..... .... ... ... ... .... .. .
- Power sunshade ... ..... .... .... ... .... .. . ... .
- Valet key function . .... .... ..... ..... ... .. ... .
@ Buttons for
- Switching MMI display on/off
- Unlocking glove compartmen t
@ Glove compartment .. .... ... ... .. ..... ..... ... . .
@ Front passenger's a irbag ...... .... .... ... ..... . .
@ Climate controls .... . ... .... ... .. .... .... ...... .
@ Ashtray ... .. .... ................... .... ...... .
@ Shift lever for automatic transmission
- 6-speed automatic transmission .... .... ..... .. .
I .
.
® -mu t1trornc ... .. ... .... ... .... .... ... .. .. .. .
@ MMI Terminal
@ Storage with cupholder ... ..... .. .... .... ... .. .. .
@ Elec tromechanical parking brake ......... .. ...... .
@ ISTART ]-~STOP ] button .. ... .... .... .... .... ... .
@ Adjustable steering wheel, depending on equipment:
- mechanical .. .... .. .... ... .... .... .... .. .. .. .
- electrica l ... ...... ... .... ...... ...... .... ... .
@ Data Link Connector for On Board Diagnostics (OBD II)
@ Hood release ... .. .... ... .. .. .... .... .... .. . ... .
@ Switch for
- unlocking the fuel filler door ... ..... ... .... ... .
- unlocking the trunk lid ....... ...... .......... .
I • •
258
73
77
51
107
107
216
112
104
153
161
103
129
126
122
122
29
296
293
58 ...

Instruments and warning /indicator lights
Instruments and warning/indicator lights
Instruments
Instrument cluster and controls
The instrument cluster is your central source of informa­
tion .
Fig . 2 Overview of the instrument clu ster
G) Coolant temperature gauge ................... .. .
@ Tachometer with tim e and dat e display . ... .... ... .
® Warning/indicator lights .. ...... ...... .......... .
© Driver information system .... .... .... ... .. ..... .
© Speedometer with odometer .... ... ... ... .... ... .
© Fuel gauge . ..... ..... ........ ........ ... .... . .
0 Instrument cluster illumination ... ...... ....... .. .
Con tro ls and eq uip­
ment
13
14, 14
17
25
15
15
16
© I CH ECK] button . ........... .... ... .... .. ...... .
© Reset bu tton for trip odome ter ...... ....... ..... .
[ i ] Tips
16
15
The illumination for the instrument cluster lights up whenever you
switch on the ignition with the
vehicle headlights off. As the
day light fades , the instrument c luster illumination likewise dims
automatically and will go out completely when the outsid e light is
very low. This feature is meant to remind you to switch on the head ­
lights when outside light conditions become poor. •
Engine coolant temperature gauge
The engine coolant gauge => fig. 2 G) only works when the ignition
is on. To prevent damage to your engine, please note the following
important points:
Engine cold
As long as th e needle remains at or close to the bottom of the
gauge, the engine still has not reached its operating temperature .
Avoid high engine speeds , heavy engine loads and heavy throttle
applications.
Normal temperature
When the engine has reached its operating temperature, the needle
wi ll move into the middle of the gauge and rema in there. If the
eng ine is working hard at high outside temperatures, the needle
may ris e up . This is no ne ed to worry as long as the
_f_ warning light
in the ins trument cluster does not illuminate . .,
Vehicle care I I irechnical data

Instruments and warning/indicator lights
Warning light in the instrument cluster -t
When the _L warning light in the instrument cluster starts to flash,
this can mean one of two things: either the coolant
temperature is
too high, or the coolant
level is too low~ page 33.
If the needle is well in the upper area of the gauge, the coolant
temperature is too high.
Stop the vehicle, switch the engine off and
allow the engine to cool.
If the warning light comes on again after
driving a short distance, contact an authorized dealer.
& WARNING
• Always observe the warning in ~ page 289, "Engine compart­
ment", before opening the hood and checking the engine coolant
level.
• Never open the engine hood if you see or hear steam, or if you
see engine coolant dripping from the engine compartment . You
could burn yourself. Let the engine cool off first so that you cannot
hear or see any steam or engine coolant.
0 Note
• Mounting additional lights or accessories in front of the air inlets
reduces the cooling effect of the radiator. At high outside tempera­
tures or high engine load, the engine could overheat.
• The front spoiler has been designed to properly distribute the
cooling air when the vehicle is moving. If the spoiler is damaged,
this could reduce the cooling effect and the engine could then
over­
heat. Ask your authorized Audi dealer for assistance. •
Tachometer (engine rev counter)
The tachometer indicates the engine RPM (revolutions per
minutes).
The tachometer 0 ~ page 13, fig. 2 is the left of the two large clock ­
type displays. The
engine turns at a speed
1,000 times the single digit in the
display, e.g. if the needle is pointing at the "2" the engine is turning
at 2,000 RPM.
If engine RPM drops below 1,500, you should downshift to the next
lower gear. The red area at the end of the scale indicates maximum
permissible engine RPM after the break -in period. Before reaching
this area, move the selector lever to position "D (Drive)" or ease your
foot off the accelerator pedal.
0 Note
The tachometer needle should not move into the red range. If it
does, then only for a
very short period of time. You could damage
your engine by driving at high RPM .
'£> For the sake of the environment
Upshifting early saves fuel and reduces engine noise.•
Digital clock with date display
Date and time of day can be set in the MM/.
Fig . 3 Instrument
cluster with digital
clock
The date, time of day, and time and date format can be set in the
MMI. You can find out more in the MMI manual. .,_

[ i J Tips
• The digital c lock and the odometer are turned on for about 30
seconds when the driver's door is opened.
• When the ignition is turned off, the odometer reading and the
digital clock with date display can be switched on for about
30 seconds by pressing the !CHECK] button~
page 16, fig. 5. •
Speedometer with odometer
The speedometer shows you the vehicle speed, and the
odometer shows you how many miles (kilometers) you
have driven.
Fig. 4 Instrument
c luster Odometer and
reset button
The odometer and trip odometer are located inside the speedom ­
eter.
• USA models - Miles
• Canada models -Kilometers
You can switch the disp lay from miles to kilometers and vice versa
via the MMI.
Lower odometer
The lower odometer shows the total number of miles (kilometers)
driven .
Contro ls and eq uip­
ment
Instruments and warning /indicator lights
Upper odometer (trip odometer)
The upper odometer shows the total number of miles (kilometers)
driven since you last reset the odometer to zero. You can use this
odometer when you want to keep track of how many miles (kilome ­
ters) you have driven for a single trip or errand. The last digit indi­
cates 1/10 of a mile (100 meters).
You can reset the trip odometer to zero by pressing the Reset button
~ o.o.
Malfunction message
If there is a malfunction somewhere in the instrument cluster,
dEF
wil l appear in the trip odometer and will stay on . Contact your
authorized Audi dealer to have the problem corrected .
Immobilizer
When the ignition is switched on, the data on the ignition key are
scanned automatically.
If an unauthorized key was used,
SAFE is displayed continuously in
the odometer display field. The vehicle cannot be operated
~ page 51.
[ i J Tips
• The digital clock and the odometer are turned on for about 30
seconds when the driver's door is opened.
• When the ignition is turned off, the odometer reading and the
dig ital clock with date display can be switched on for about
30 seconds by pressing the
I CHECK] button ~ page 16, fig. 5. •
Fuel gauge
The fuel gauge only works when the ignition is on .
When the needle reaches the reserve mark, the~
page 36
symbo l appears in the instrument cluster display as well as the
message
Please refuel. There are approximately between 1.8 and 2.4 ~
Vehicle care I I Technical data

Inst rum ent s a nd warning /indi cato r li ghts
gallons (7 -9 liters) of fuel left . This message is meant to remind you
t o
r e fu el.
The to tal tank capacity of your vehicle is listed in:::, page 363.
0 Note
Never run the tank completely dry . An irregular supply of fuel can
cause engine misfiring and fuel could enter the exhaust system . The
cata lytic converter could then overheat and be damaged .•
[ C HECK] button
You can perform different functions with this button.
Fig . 5 C HECK b utton in
th e i nstru ment cluste r
The [ CHECK I button performs the following functions :
Swit c h in g on the c lock a nd odom ete r
With the ign ition turned off, the odometer reading and the digital
clock with date display can be switched on for about 30 seconds by
pressing the
( CHECK ] button~ fig . 5.
St arting th e Auto -C hec k seq uen ce
The Auto-Check system:::, page 30 constantly monitors certain ind i­
vidual functions and compon ents of th e vehicle when the ignition is
turned on and when the vehicle is mov ing. With the ignition turned on, you can start the
"Auto-Check
sequence" by pressing the
I C HECK ] button. You can perform an
Auto-Check sequence when the vehic le is s tationary and the igni tion
is turned on or when the vehicle is moving not faster than 3 mph
(5 km/hl.
Ca lling up th e dri ver inform atio n
A yellow or red symbo l appears in the instrument cluster display,
usually with a driver message. The driver message display disap ­
pears after about 5 seconds. The driver message can be displayed
again by briefly pressing the
( C HECK ] button.
Settin g th e s pee d w arn in g
By pressing the [ CHECK] button briefly, you can set threshold 1 of
the speed warning while you are driving:::,
page 39. By maintaining
pressure on the
[ CHECK] button, you de lete the warning
threshold. •
Instrument cluster illumination
The basic brigh tness of the illumination for the instru ­
ments, the center console and the display can be
adjusted.
F ig . 6 Inst rum ent
c luste r illumin ati on
Press the"+" button to increase the brightness d uring the
hours of darkness . ..,.

- Press the"-" button to decrease the brightness during the
hours of darkness .
A light sensor in the instrument cluster controls the il luminat ion for
the instrument cluster, the center console and the displays. In a bright environment, using the buttons to change the brightness has
no effect.
[ i ] Tips
The illumination for the instrument cluster lights up whenever you
switch on the ignition with the vehicle head lights off. As the
daylight fades, the instrument cluster illumination likewise dims
automatically and wi ll go out comp lete ly when the outside light is
very low. This feature is meant to remind you to switch on the head­
lights when outside light conditions become poor. •
Contro ls and eq uip­
ment
Instruments and warning /indicator lights
Warning /indicator lights
Overview
The warning/indicator lights indicate different functions
or a possible malfunction.
Fig. 7 Instrument cluster with warning/indicator lights
Your vehicle is equipped with severa l important warning and indi ­
cator lights to he lp you monitor the continued reliable operation of
your vehicle ::::;>& .
0
Electronic power control
Generator ::::;> page 19
=> page 79
Electronic Stabilization Program (ESP) => page 19
Vehicle care
I I Technical data