2008 AUDI R8 wheel

Basic operation137
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Press the button
page 128, fig. 110 repeatedly
until the navigation menu appears in the display of the
driver information system
page 136, fig. 121.
Would you like to find out more about the navigation function in
your vehicle? You can find a detailed description on
page 104.
Applies to vehicles: with multi-function steering wheel and navigation system
Repeating voice guidance cues
– Press the right thumbwheel to have the last route
guidance cue repeated
page 128, fig. 110.
Vo i c e c o n t r o l
Applies to vehicles: with multi-function steering wheel and speech dialogue system or
telephone speech control system
Switching the speech dialogue system /
telephone speech control system on and off
Switching on
– Press the button .Switching off
– Press and hold the talk button until you hear the cue
.
The system will give a beep tone when it is ready to begin with a
dialogue. The desired functions can then be accessed with speech
commands.
Note
For a more detailed description, please refer to the chapter on

page 169, “Speech dialogue system” or
page 161, “Basic oper-
ation”. If your vehicle is not equipped with the speech
dialogue/control system, this button has no function.
MODE
AD
Fig. 122 Multi-func-
tion steering wheel:
Ta l k b u t t o n
A3
A3





 




Basic operation141
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control Left control button
Selects the function shown in the bottom left-hand corner of the
display, e.g. Ph.book
page 140, fig. 124.
Right control button
Selects the function shown in the bottom right-hand corner of the
display, e.g. Menu
page 140, fig. 124.
“End call” button
Ends a call, declines a call or closes a menu.
Navigation button
The top or bottom part of the navigation button can be used to scroll
up or down within a menu shown on the display.
The left or right side of the navigation button can be used to select
one of the main menus
page 151 (Last calls
page 152), adjust
settings (e.g. brightness
page 155) or to move the cursor when
entering text
page 143.
“Call” button
Dials a number or receives a call. Also displays a list of numbers
dialled when pressed in the main screen. Numeric keypad
The numeric keypad is used to enter the numbers 0 - 9, as well as
letters and special characters. The and buttons are used for
different purposes in various functions
page 143.
If the automatic keypad lock is activated
page 156, the buttons on
the handset keypad will be locked automatically (approximately one
minute after you take it out of the carrier) and a padlock symbol

page 142, fig. 127 will appear in the handset display.
To unlock the keypad, press the control button for Unlock on the
handset and immediately press the button.
To activate the keypad lock manually, press the button on the
handset and immediately press the control button for Lock.
To receive a call when the keypad lock is active, press the control
button for Answer. The keypad will be locked again automatically
when you end or decline a call.
On/off button
Switches the handset on or off
page 140.
Volume control button
You can increase or reduce the earpiece volume during a phone
call.
Fig. 125 Volume
control button
A1
A2
A3
A4
A5
A6
*#
A9
*
*
A7
A8










Basic operation143
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Applies to vehicles: with handset for the car telephone kit
Entering a text message
Text messages can be entered using the conventional
method or with automatic word recognition (T9).
Entering text (normal method)
–If T9 mode is active
fig. 128, keep pressing the
button until the T9 symbol disappears.
– To enter a text at the position indicated by the cursor,
press one of the buttons marked to
page 140,
fig. 124.
– Keep pressing each button until the desired character
appears in the display.
– For example, press the button once to enter the
letter m.
– Press the button quickly a second time to enter
the letter n.
– With each additional press of the button the
next character assigned to the button is selected.– If you do not press a button again within about one
second, the character is entered and the cursor will flash
at the next position; you can then enter the next char-
acter.
– To enter a special character, hold down the “*” button
and select the character.
– To move the cursor to the left, right, up or down, press
the left, right, top or bottom part of the navigation
button.
– To insert a space, press the button.
– To delete the character to the left of the cursor, select
Delete.
Entering text using automatic word recognition
(T9)
– If T9 mode is not active
fig. 128, keep pressing the
button until the T9 symbol appears.
– Press one of the buttons marked to to start
entering a word.
– Press each button only once for each letter of the word,
even if the exact letter desired does not appear in the
display. The letters you enter are displayed on a grey
background
fig. 128.
– Enter all the letters of the word.
– If the dictionary contains more than one suggested word,
press the button to choose between the different
suggestions. A message, e.g.
fig. 128 appears in
the handset display.
– Press the button if the word in the display is correct.
Fig. 128 Symbols for
entering text
A1#
19
6mno
6mno
6mno
0
A1
#
29
A3
*
A4
0





 




Using the telephone145
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Using the telephone
Applies to vehicles: with handset for the car telephone kit
Placing calls
Placing calls
– Enter the desired number on the keypad.
– If you have entered an incorrect digit, press the control
button for Delete.
– Press the “Call” button
page 140, fig. 124 to start
dialling.
Selecting a number from the “phone book”
– Press the control button for Ph.book
page 142,
fig. 126. The entries stored in the phone book will be
listed.
– To jump to a particular entry in the phone book, enter the
initial letter using the normal text entry method.
– Use the navigation button to scroll up or down to the
desired entry
page 153, fig. 140.– Press the “Call” button
page 140, fig. 124 to start
dialling.
Redial
– Press the “Call” button
page 140, fig. 124 once. The
list of last numbers dialled appears.
– Use the navigation button to scroll up or down to the
desired entry
page 153, fig. 140.
– Press the “Call” button to start dialling.
Hold the reverse side of the handset to your ear (the earpiece and
microphone are located on the reverse side of the handset

fig. 129).
You can use the handset to make phone calls in private mode or
handsfree mode
page 150.
A microphone integrated in the interior light is used in handsfree
mode. The microphone is directed towards the driver.
You can also select and dial a telephone number from the call lists

page 152.
Note
Press and hold the button to enter the international network
symbol “+”.
Fig. 129 Earpiece and
microphone on back
A5
A5
A5
A1A2
*+










Using the telephone147
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control Your mailbox number is assigned to one-touch dial button . If you
haven't already stored a mailbox number
page 157, you will have
the opportunity do this when you select one-touch dial button .
The second telephone number stored in the SIM card phone book
(position number “2”) is assigned to one-touch dial button .
The next seven telephone numbers in the SIM card phone book are
assigned to buttons to respectively.
Note
•If a position is already assigned, it must be deleted before you
can store a new entry at that position.
•How many position numbers are stored depends on the SIM card
being used.
Applies to vehicles: with handset for the car telephone kit
Answering and ignoring telephone
calls
Answering telephone calls
– Press the control button for Answer, or
– Press the “Call” button
page 140, fig. 124.Ignoring telephone calls
– Press the control button for Reject, or
– Press the “End call” button
page 140, fig. 124.
Depending on whether the caller is stored in the phone book and
whether the number is transmitted with the call, the name, the tele-
phone number or Unknown will appear on the MMI display.
If you activate the Answer on eject function, an incoming call will be
answered immediately when you take the handset out of the carrier

page 156.
Applies to vehicles: with handset for the car telephone kit
Emergency calls
Without SIM card
– Switch on the ignition, the MMI and (if not already acti-
vated) the handset
page 140. A Bluetooth connection
must exist between the handset and the car telephone
kit. Please insert the SIM card should be shown in the
handset display.
– Press the control button for SOS
fig. 132.
1
1
2abc
3def9wxyz
Fig. 131 Incoming call
A5
A3
Fig. 132 Control
button SOS










Using the telephone149
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Applies to vehicles: with handset for the car telephone kit
Options during a call
Various options can be used during a call.
– Press the control button for Options anytime during an
active call.
page 148, fig. 133.
The options available during a call depend on the current telephone
status. For example, if you place a call on hold using the Hold option

fig. 134, the Hold option is replaced by Resume.
Menu
You can access the main menus
page 151 while a call is active.
Holding/resuming a call
The Hold and Resume options allow you to hold a call and retrieve it
later from the hold queue.
Placing a further call (Dial)
First select Hold to place the active call on hold. Then enter the tele-
phone number on the handset. Select Dial to dial the number.
Press the control button (soft key) for End call or press the “End call”
button (hard key) once to end whichever call is active. If you placed
a call on hold earlier on, that call will remain on hold. You can end the call on hold by pressing the control button (soft key) for End call
or the “End call” button (hard key) again.
Microphone on/off
Your caller cannot hear your private conversations when the micro-
phone is off. You can still hear the caller.
End call/End active call
The call active at the time is disconnected.
Switching between calls
You can switch between two phone calls (one of them will be on
hold at any given time).
Press the control button for End call to end whichever call is
currently active. The call on hold will remain in the hold queue.
Conference calling
Up to five callers can take part in a conference (depending on the
network service).
Select Conference to set up a conference. The call on hold and the
active call are added to the conference.
You can make a further call after placing all of the conference callers
on hold with the Hold option. To add another caller to an existing
conference, select Conference.
Select Resume conference if you want to retrieve all callers of an
existing conference from the hold queue. You can use the Conf.
participants option to select conference callers individually and
remove them from the conference.
Send tone sequence
This function is used to load DTMF tones from the stored phone
numbers
page 153. You can also enter DTMF tones directly on the
keypad during a call.
Fig. 134 Call options










Menus151
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Menus
Applies to vehicles: with handset for the car telephone kit
Introduction
Use the navigation button to select the main menus.
– Press the control button for Menu
page 142,
fig. 126. The tab of the main menu shown in the
display is highlighted in white.
– To select a main menu, e.g. Settings
fig. 135, use the
navigation button to scroll left or right across the display.
The submenu of the main function you have selected will
appear in the centre of the display.– Press the bottom part of the navigation button to jump to
the submenu.
– Press the top or bottom part of the navigation button to
scroll up or down to the desired submenu item, for
example Call options. An arrow to the right of the
submenu item in the centre part of the display

fig. 136 indicates that further submenus are available.
– Press the right part of the navigation button to open the
next submenu level.
– To activate or deactivate a selection button
fig. 136,
press the control button for Ok.
– To jump one level up the menu tree, press the control
button for Back
fig. 136.
– To close the menus, press the “End call” button.
When the arrows on either side of the main menu name are
displayed, you can browse through the main menus by pressing the
right or left side of the navigation button.
If you have called up a submenu in the centre of the display and
several submenu levels are available, you can browse through the
submenus by pressing the right or left side of the navigation button.
Select Options to call up further options for a function displayed on
the handset screen.
Use the handset keypad to enter a name, text message or other
characters
page 143.
Fig. 135 Settings
Fig. 136 Settings
menu - Call options
A8
AA
A1
A2
AB










Menus153
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
•If you switch the call information on the MMI off and on again

page 97, the complete contents of the call lists will be deleted.
Applies to vehicles: with handset for the car telephone kit
“Phone book” menu
– Press the control button for Menu
page 142,
fig. 126.
– Select Phone book using the navigation button.
New entry
•Name - to enter a first name and surname.
•Number - to enter the telephone number for the entry.
•Pos it ion - used for speed dialling and one-touch dialling

page 146. A free position is automatically suggested.
•Store - to store the phone book entry on the SIM card.
Finding an entry
When you enter the initial letter of an entry you want to find, the
cursor jumps through the list to the entries starting with that letter.
When an entry is selected, you can call up the following functions
by pressing the control button for Options:
•Details - to display the name, telephone number and position of
the entry.
•Edit - to edit the name, telephone number and position of the
entry.
•Delete - to delete the selected entry.
•Call - to call the selected entry.
Memory in use
•SIM - SIM card entries are loaded and displayed.
•Telephone - Phone book entries on the mobile phone are loaded
and displayed. To use this function, a mobile phone with SIM Access
Profile must be connected to the car telephone kit and the SIM card
must be in the phone
page 24.
•SIM+Tel. - SIM card entries and phone book entries on the mobile
phone are loaded and displayed. To use this function, a mobile
phone with SIM Access Profile must be connected to the car tele-
phone kit and the SIM card must be in the phone
page 24. If the
SIM card is in the handset, only the SIM card entries will be
displayed.
The memory in use can be set separately on the MMI
page 100.
Displaying the phone book entries
The phone book entries are displayed in alphabetical order together
with a category symbol
fig. 140, e.g. SIM card, private, business,
mobile phone or telephone symbol.
Fig. 139 Phone book
menu
Fig. 140 Phone book
entries
A8