2008 AUDI Q5 key

Using the telephone149
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Applies to vehicles: with handset for the car telephone kit
Options during a call
Various options can be used during a call.
– Press the control button for Options anytime during an
active call.
page 148, fig. 133.
The options available during a call depend on the current telephone
status. For example, if you place a call on hold using the Hold option

fig. 134, the Hold option is replaced by Resume.
Menu
You can access the main menus
page 151 while a call is active.
Holding/resuming a call
The Hold and Resume options allow you to hold a call and retrieve it
later from the hold queue.
Placing a further call (Dial)
First select Hold to place the active call on hold. Then enter the tele-
phone number on the handset. Select Dial to dial the number.
Press the control button (soft key) for End call or press the “End call”
button (hard key) once to end whichever call is active. If you placed
a call on hold earlier on, that call will remain on hold. You can end the call on hold by pressing the control button (soft key) for End call
or the “End call” button (hard key) again.
Microphone on/off
Your caller cannot hear your private conversations when the micro-
phone is off. You can still hear the caller.
End call/End active call
The call active at the time is disconnected.
Switching between calls
You can switch between two phone calls (one of them will be on
hold at any given time).
Press the control button for End call to end whichever call is
currently active. The call on hold will remain in the hold queue.
Conference calling
Up to five callers can take part in a conference (depending on the
network service).
Select Conference to set up a conference. The call on hold and the
active call are added to the conference.
You can make a further call after placing all of the conference callers
on hold with the Hold option. To add another caller to an existing
conference, select Conference.
Select Resume conference if you want to retrieve all callers of an
existing conference from the hold queue. You can use the Conf.
participants option to select conference callers individually and
remove them from the conference.
Send tone sequence
This function is used to load DTMF tones from the stored phone
numbers
page 153. You can also enter DTMF tones directly on the
keypad during a call.
Fig. 134 Call options










Menus151
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Menus
Applies to vehicles: with handset for the car telephone kit
Introduction
Use the navigation button to select the main menus.
– Press the control button for Menu
page 142,
fig. 126. The tab of the main menu shown in the
display is highlighted in white.
– To select a main menu, e.g. Settings
fig. 135, use the
navigation button to scroll left or right across the display.
The submenu of the main function you have selected will
appear in the centre of the display.– Press the bottom part of the navigation button to jump to
the submenu.
– Press the top or bottom part of the navigation button to
scroll up or down to the desired submenu item, for
example Call options. An arrow to the right of the
submenu item in the centre part of the display

fig. 136 indicates that further submenus are available.
– Press the right part of the navigation button to open the
next submenu level.
– To activate or deactivate a selection button
fig. 136,
press the control button for Ok.
– To jump one level up the menu tree, press the control
button for Back
fig. 136.
– To close the menus, press the “End call” button.
When the arrows on either side of the main menu name are
displayed, you can browse through the main menus by pressing the
right or left side of the navigation button.
If you have called up a submenu in the centre of the display and
several submenu levels are available, you can browse through the
submenus by pressing the right or left side of the navigation button.
Select Options to call up further options for a function displayed on
the handset screen.
Use the handset keypad to enter a name, text message or other
characters
page 143.
Fig. 135 Settings
Fig. 136 Settings
menu - Call options
A8
AA
A1
A2
AB










Menus 154
Applies to vehicles: with handset for the car telephone kit
“Text messages” menu
Text messages can be sent using the handset.
– Press the control button for Menu
page 142,
fig. 126.
– Select Te x t m e s s a g e s using the navigation button.
New text msg
Enter the text on the handset keypad
page 143.
Long texts will be sent in two or more separate messages. The total
message length is shown in the top right-hand corner of the display
and is counted down from 765
page 143, fig. 128.When you open a new text message, you can call up the following
functions by pressing the control button for Options:
•Send - to send the text message you have written.
•Store - to store the text message you have written.
•Insert symbol - to insert special characters such as €.
•Add word - to write a word and add it to the dictionary
•Insert template - to insert a template, e.g. I will be late ...
•Input language - to select German, English, French, Italian,
Spanish or Portuguese for a text message.
•Input mode - to select T9 mode, ABC mode or 123 mode.
Inbox
When you open a new text message in the inbox, you can select the
following functions by pressing the control button for Options:
•Delete - to delete the open text message.
•Call - to dial the number of the person who sent the text
message.
•Reply - to answer a text message you have received.
•Extract number - to copy a telephone number from a text
message into the display for editing.
•Edit - to edit a text message open in the inbox.
•Forward - to forward a text message you have received to
another telephone number.
Outbox
The outbox lists the entries you have stored and sent.
When you open a text message in the outbox, you can select the
following functions by pressing the control button for Options:
•Delete - to delete the open text message.
•Call - to dial the number of the person who sent the text
message.
Fig. 141 Text
messages menu
Fig. 142 Text message
settings
A8
A4










Menus 156
Button
page 140, fig. 124 switches the handset on/off.
Te l e p h o n e
•Ring tone - the selected ring tone is played and the setting is
automatically stored when you close the submenu.
•Ring tone volume - the ring tone is played at the selected volume
and the setting is automatically stored when you close the
submenu.
•Brightness - to set the brightness of the handset display.
•Language - select Menu language (German, English, French,
Italian, Spanish or Portuguese) to change the language on the
handset display. This setting is independent of the MMI setting

page 51. Select Input language (German, English, French, Italian,
Spanish or Portuguese) to change the language for entering text
messages
page 143 and the language for templates
page 155.
The Menu language is not changed if you change the Input
language. However, if you change the Menu language, the Input
language is changed to the same setting.
•Default settings - to reset the handset to the default settings. The
functions are reset separately on the MMI
page 97.
•T9 settings - to set up the handset for writing text messages

page 143. If you activate the Word completion setting and write a
word in a text message, the next word will be suggested automati-
cally if you have used this word pair often in the past. If you activate
the Sorting setting, the list of words will be sorted. The most
frequently used words will appear at the top of the list. If you acti-
vate the Word prediction setting, a possible next word will be
suggested when you enter a new word in a text message. If you acti-
vate the Defaults option, T9 mode will always be selected when you
start writing a text message. The Input language setting allows you
to choose a different language from the Menu language for writing
text messages. However, if you change the Menu language, the
Input language is changed to the same setting.
•Autom. keylock - if this setting is active (i.e. if the selection
button is filled in), the keypad will be locked automatically about a
minute after the handset is removed from the carrier. This will happen only if the main screen is displayed and none of the handset
functions is being used.
Bluetooth
•Veh. base station - to display the available car telephone kit
(vehicle base station - e.g. “AUDI BTA”) on the screen. The vehicle
base station is required for the bonding procedure
page 27.
•Bluetooth devices - to delete the list of bonded vehicle base
stations. Please note that the bonding procedure must be repeated
if the list is deleted.
•Bluetooth name - to change the name of the handset in use.
Call options
•Call waiting - when this setting is active and you are on the
phone, an audible tone will tell you if a caller is trying to reach you.
Select Status to check the current setting for the Call waiting func-
tion.
•Transmit caller ID - your telephone number is transmitted with
outbound calls when this setting is active. Select Network-depend.
to use the setting agreed in your service provider's contract. Select
Status to check the current setting for the Transmit caller ID func-
tion.
•Answer on eject - if this setting is active (i.e. if the selection
button is filled in
page 151, fig. 136), an incoming call will be
answered immediately when you take the handset out of the carrier.
Security
•PIN query - if you activate this setting, the PIN is always checked
when you switch on the phone. If Automatic PIN recognition is acti-
vated, the system does not ask you to enter the PIN explicitly. If you
deactivate the PIN query, the PIN is not checked when you switch on.
Some SIM cards do not allow the PIN query to be deactivated.
•Change PIN - first enter the existing PIN code for your SIM card.
The PIN can only consist of numbers from 0 to 9. The new PIN has
to be entered twice, as a precautionary measure, and is stored on
the SIM card. If you change the PIN when the SIM card is in a
A7
A1





!




Telephone speech control system 162
Applies to vehicles: with telephone speech control system
Help functions
The speech dialogue system offers you two help func-
tions: The help commands and the guided dialogue
assistance.
Help commands
If the speech dialogue system is activated
page 170, you can say
the command HELP. The system will display possible commands in
the MMI screen
page 171, fig. 154 and will also speak the
commands.
Guided dialogue assistance
If the speech dialogue system is activated
page 170 and you do
not say a command, the speech dialogue system will ask .
If you still give no command, the speech dialogue system will
suggest important commands.
Example for help cues (for selecting a number from the phone book)Applies to vehicles: with telephone speech control system
Entering the PIN code
Important: The speech control system must be switched on

page 161.
– Give the command ENTER PIN or ENTER PIN CODE.
– Say the individual digits of your PIN code.
– Say the command STORE.
If the PIN code is more than 8 digits long, the system will decline
and give the cue . If the specified PIN code is
incorrect, the system will say . If the wrong
PIN code is entered three times in a row, the SIM card will be
blocked. The SIM card can be unlocked by entering the PUK
(personal unblocking key)
page 88 using the MMI speller or the
keypad on your mobile phone.
Fig. 147 Important
commands
Operation/
CommandCue from
speech control system
Briefly press talk but-
tonAcoustic signal:
DIAL NUMBER
e.g. ZERO, ONE, TWO,
THREE
No command given
No command given









!





Index 186
Entry in directory
Calling (MMI control console) . . . . . . . 82
Calling (speech dialogue system) . . . 176
Changing / copying . . . . . . . . . . . . . . . . 85
Deleting . . . . . . . . . . . . . . . . . . . . . . . . . 86
Editing . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Finding . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Importing . . . . . . . . . . . . . . . . . . . . . . . . 81
Navigation (MMI control console) . . . . 83
Navigation (speech dialogue system) 176
New entry . . . . . . . . . . . . . . . . . . . . . . . . 80
EPG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
External
AV source . . . . . . . . . . . . . . . . . . . . . 76, 79
Bluetooth devices . . . . . . . . . . . . . . . . . 96
Players . . . . . . . . . . . . . . . . . . . . . . . . . . 18
F
Fader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Fast forward in track (media drive) . . . . . . 65
Favourite stations
Deleting . . . . . . . . . . . . . . . . . . . . . . . . . 61
Switching on/off . . . . . . . . . . . . . . . . . . 60
Filter display . . . . . . . . . . . . . . . . . . . . . . . 124
Forwarding data calls . . . . . . . . . . . . . . . . 99
Forwarding fax calls . . . . . . . . . . . . . . . . . . 99
Forwarding phone calls . . . . . . . . . . . . . . . 99
Frequency . . . . . . . . . . . . . . . . . . . . . . . 54, 56
Function selector button . . . . . . . . . . . . . . 41
G
GALA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
H
Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Bonding handset . . . . . . . . . . . . . . . . . . 27
Entering text . . . . . . . . . . . . . . . . . . . . 143
Menus . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Phoning . . . . . . . . . . . . . . . . . . . . . . . . 145
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Speed dialling . . . . . . . . . . . . . . . . . . . 146
Switching on/off . . . . . . . . . . . . . . . . . 140
Handset display . . . . . . . . . . . . . . . . . . . . 142
Handsfree mode . . . . . . . . . . . . . . . . . . . . 149
Help function
Speech control system . . . . . . . . . . . . 162
Speech dialogue system . . . . . . . . . . 171
I
Importing a telephone number . . . . . . 81, 83
In immediate vicinity . . . . . . . . . . . . . . . . 116
In vicinity of destination . . . . . . . . . . . . . 116
INFO
Audi music interface . . . . . . . . . . . . . . . 69
DAB data services . . . . . . . . . . . . . . . . . 61
MP3 CD . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Traffic reports . . . . . . . . . . . . . . . . . . . 121
Input level . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Intersection zoom (navigation) . . . . . . . . 119iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
MMI control console . . . . . . . . . . . . . . . 63
Multi-function steering wheel . . . . . . 130
J
Jack plug . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
K
Keypad lock (handset) . . . . . . . . . . . . . . . 155
L
L band (DAB) . . . . . . . . . . . . . . . . . . . . . . . . 62
Language setting
Handset . . . . . . . . . . . . . . . . . . . . . . . . 155
MMI control console . . . . . . . . . . . . . . . 51
Laser equipment . . . . . . . . . . . . . . . . . . . . . 11
Last calls
Handset . . . . . . . . . . . . . . . . . . . . . . . . 152
MMI control console . . . . . . . . . . . . . . . 91
Multi-function steering wheel . . . . . . 134
Last destinations
Deleting . . . . . . . . . . . . . . . . . . . . . . . . 120
Loading . . . . . . . . . . . . . . . . . . . . . . . . . 114
Last stations (radio)
Deleting . . . . . . . . . . . . . . . . . . . . . . . . . 61
Switching on/off . . . . . . . . . . . . . . . . . . 60
Loading from directory (navigation) . . . . 115
Local stations . . . . . . . . . . . . . . . . . . . . . . . 59





!