2008 AUDI A4 clock

Playing media67
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Pausing (media drive)
– Briefly press the ON/OFF button, or
– Turn the ON/OFF button anti-clockwise until the mute
symbol appears in the status line. (...) pause will appear
in the heading.
Resuming (media drive)
– Briefly press the ON/OFF button, or
– Turn the ON/OFF button clockwise. The playback will then
be continued.
Note
You can also operate this function without removing your hands
from the steering wheel
page 131.
Naming CDs
You can name individual CDs. After re-inserting the CD
into any slot, the stored name of the CD will be displayed.
Important: An audio CD must be playing
page 64.– Press the control button for CD control.
– Turn the rotary pushbutton to NAME
fig. 61.
– Press the rotary pushbutton. The speller will appear on
the MMI display
page 43.
– Use the Speller to enter the desired name.
– To store the name, turn the rotary pushbutton to OK in
the speller and press the rotary pushbutton.
For technical reasons, some CDs cannot be named. This is the case,
for example, when the CD manufacturer has already named the CD.
You can only name whole CDs. The individual tracks of a CD cannot
be named.
Other settings for CDs in the CD
changer
Deleting a stored CD name
Important: The audio CD must have been named first

page 67.
– Select: Function selector button > control
button CD control > function wheel NAME > Delete CD
name.
Deleting all stored CD names
Important: A CD inserted in the slot must have been named
first
page 67.Fig. 61 Name CD
MEDIA





!




Television 74
– Press the control button for TV control.
– Turn the rotary pushbutton to select >| (Seek up) or |<
(Seek down).
– Press the rotary pushbutton to start the automatic
channel search. The system will select the next available
channel.
Next channel
– Briefly turn the rotary pushbutton when the picture has
expanded to the full MMI screen. A list of TV channels will
appear.
– Press the control button for TV control.
– Turn the rotary pushbutton to select >> (Manual up)

page 73, fig. 66 or << (Manual down).
– Press the rotary pushbutton to select the previous/next
channel.
In the case of digital channels you change from one channel to
another within the same multiplex. The number of the current
channel within the multiplex is displayed in the centre of the func-
tion wheel below the channel number. Example: Channel number
Ch.32
page 73, fig. 66 is number 2 within the multiplex.
Note
It is possible that you will not be able to receive a TV channel on
every channel number.
Applies to vehicles: with DVB-T
Storing TV channels
You can store up to 60 channels in the memory list.
Important: You must first select a TV channel
page 73.
Using the rotary pushbutton
– Press and hold the rotary pushbutton until the channel
appears in a free position on the memory list
fig. 67.
– Turn the rotary pushbutton clockwise or anti-clockwise to
change the position on the memory list.
A2A1
Fig. 67 Storing a
channel
Fig. 68 Storing a
channel










Television75
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– To store the channel to the position on the memory list,
press the rotary pushbutton.
Using the Memory control button
– Press the Memory control button.
– Turn the rotary pushbutton and select Store channel
name
page 74, fig. 67.
– Press the rotary pushbutton. The selected channel will
appear in a free position on the memory list.
– Turn the rotary pushbutton clockwise or anti-clockwise to
change the position on the memory list.
– To store the channel to the position on the memory list,
press the rotary pushbutton.
Using the TV control control button
– Press the control button for TV control.
– Turn the rotary pushbutton to STORE
page 74, fig. 68.
– Press the rotary pushbutton. The selected channel will
appear in a free position on the memory list.
– Turn the rotary pushbutton clockwise or anti-clockwise to
change the position on the memory list.
– To store the channel to the position on the memory list,
press the rotary pushbutton.
Note
You can delete only one or all channels from the memory list

page 76.
Applies to vehicles: with DVB-T
Selecting a stored channel
Important: A channel must be stored in the memory list

page 74.
– Press the Memory control button. The memory list will be
displayed.
– To select a channel from the memory list, turn the rotary
pushbutton to the channel.
– Press the rotary pushbutton. The channel will be
selected.
Note
Why don't you try selecting a stored TV channel using the multi-
function steering wheel
page 131?
Applies to vehicles: with DVB-T
Moving a stored channel
Important: A channel must be stored in the memory list

page 74.
– Press the Memory control button. The memory list will be
displayed.
– Turn the rotary pushbutton to select the channel and
press the rotary pushbutton.
– Press the rotary pushbutton again and hold it down until
Store channel name appears in the MMI display, or
– Turn the rotary pushbutton to Move channel name and
press to confirm.










Television 76
– Turn the rotary pushbutton clockwise or anti-clockwise to
change the position on the memory list.
– To store the channel to the position on the memory list,
press the rotary pushbutton.
Applies to vehicles: with external AV source
Selecting an external AV source
AV devices can be connected to the MMI system via a
special connector cable.
Important: An AV device must be connected, and the
required AV standard must be set
page 79.
– Briefly turn the rotary pushbutton when the picture has
expanded to the full MMI screen. A list of TV channels will
appear.
– Press the control button for Source. The Source menu
will appear on the MMI display
fig. 69.
– Using the rotary pushbutton, select Exte rna l AV source 1
or External AV source 2 as required.– Press the rotary pushbutton to confirm the source. The
AV source picture will then appear in the MMI display.
Note
You can obtain the connector cable from an Audi dealer or special-
ised retailer.
Other settings
Applies to vehicles: with DVB-T
Deleting stored channels
Important: A channel must be stored in the memory list

page 74.
– Select: Function selector button > function
selector button > Delete stored stations > Delete
individually or Delete all entries.
You can delete only one or all channels from the memory list.
Applies to vehicles: with DVB-T
Electronic Programme Guide (EPG)
– Select: Function selector button > source TV >
control button TV control > EPG (programme informa-
tion).
Detailed information on the current and the following programmes
will be displayed.
If you select a TV channel from the overview of programmes and
press and hold the rotary pushbutton, that TV channel will be
selected as the current channel.
Fig. 69 External AV
source 1 selected
MEDIA
SETUP
MEDIA





!




Television77
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Note
The electronic programme information cannot be displayed while
the vehicle is in motion.
Applies to vehicles: with DVB-T
Teletext (TT)
– Select: Function selector button > source TV >
control button TV control > TT (teletext).
If the reception is poor, the display may show incomplete sections
of text or defective characters. If there is no teletext available, the
first line of the teletext display will show “No Teletext service”.
Changing the teletext page
To switch to the previous or next teletext page turn the rotary push-
button. To enter a teletext page number press the rotary pushbutton
and enter the number by turning and pressing the pushbutton as
often as required.
Note
•Whether teletext is available on the channel you have selected is
also indicated by a symbol on the info bar
page 73.
•The teletext function is not available while the vehicle is in
motion.
Applies to vehicles: with DVB-T
Teletext Zoom
– Select: Function selector button > source TV >
function selector button > Te l e t e x t z o o m.
Teletext zoom on
If you turn the rotary pushbutton, first one half, then the other half
and finally the entire teletext page will be displayed.
Applies to vehicles: with analog TV and DVB-T
Display settings
– Select: Function selector button > source TV >
function selector button > Brightness, Contrast,
Colour, Tint or Pict. format.
Brightness
Turn the rotary pushbutton clockwise/anti-clockwise to
increase/reduce the brightness of the display.
Contrast
Turn the rotary pushbutton clockwise/anti-clockwise to
increase/reduce the picture contrast of the display.
Tint
10)
Turn the rotary pushbutton clockwise/anti-clockwise to
increase/reduce the colour intensity of the display.
Picture format
The picture is displayed in the format 16:9 or 4:3.
Applies to vehicles: with DVB-T
Sound channel (DVB-T)
– Select: Function selector button > source TV >
function selector button > Sound chnl.
MEDIA
MEDIA
SETUP
10)Applies to NTSC TV standard.
MEDIA
SETUP
MEDIA
SETUP










Navigation 110
– Press the rotary pushbutton. Now you can set the
selected point as a destination or a stopover, store it in
the directory or even call* it if a number is stored for the
selected point
page 109, fig. 98.
Note
If you do not move the crosshairs for a moment, you will receive
detailed information on the position of the crosshairs (e.g. town or
street name).
Applies to vehicles: with navigation system
Stopping the route guidance
Important: The route guidance function must be activated

page 105.
– Press the function selector button.
– Turn the rotary pushbutton and select Stop route
guidance.
Note
The previously entered data and settings remain unchanged even
when you cancel the route guidance.
Display
Applies to vehicles: with navigation system
On the MMI display
As soon as you press the Map control button (while the route guid-
ance is activated), the map will appear on the MMI display with the
legend menu deactivated
fig. 99.
In this display, you can zoom in and out of the map. To do so, turn
the rotary pushbutton clockwise or anti-clockwise.
You can activate the legend menu
fig. 100 by pressing the rotary
pushbutton. Now you can change the map display via the legend
menu. To do so, turn the rotary pushbutton to select the point on the
map and press the rotary pushbutton.
NAV
Fig. 99 Map with deac-
tivated legend menu
Fig. 100 Map with
activated legend menu










Navigation111
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control You can exit the legend menu by pressing .
Orientation. The map is displayed either facing north or facing
the direction of travel
page 118. If you select the orientation
option in the activated legend menu and press the rotary push-
button, the orientation switches from the direction of travel to
the direction facing north and vice versa. This setting is not
stored.
Scale. Turn the rotary pushbutton clockwise/anti-clockwise to
zoom in or out. You can also change the scale via the activated
legend menu. The setting that was last activated is stored.
Distance to the destination
Estimated time of arrival
Examples of selected map contents
Depiction of motorway exits on a scale of 50 m to 500 m. On a
scale of 750 m to 8 km the exits are displayed as dots.
Location of the vehicle
Destination control button. To switch to entry space

page 105, fig. 91 or the route plan
page 108, fig. 96.
If you use the crosshairs to select map contents, any existing
information on the contents (e.g. address, phone number) will
be displayed. If you select a traffic jam symbol and press the
rotary pushbutton, the corresponding TMC traffic report will be
displayed. On a scale of 1 km upwards, the map contents will
not be displayed.
Display of position coordinates of the crosshairs (longitude and
latitude).
Map position menu. The point on the map selected with the
crosshairs can be set as a destination or stopover, stored in the
directory and called up on the telephone
page 109.
The crosshairs can be moved horizontally and vertically by
turning and pressing the rotary pushbutton. Press the rotary
pushbutton to switch between the horizontal and vertical cross-
hair bars or deactivate this option. Using this option, you can,
for example, select a new destination
page 109.Moving along the route. This function can be used while route
guidance is activated. Turn the rotary pushbutton clock-
wise/anti-clockwise to move the map along the current route.
Altitude display
Note
Did you know that you can choose from four different map types

page 118?
Applies to vehicles: with navigation system
In the driver information system
RETURN
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
Fig. 101 Display when
a lane change is
required
Fig. 102 Display when
a turn-off is required










Speech dialogue system171
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Starting from any of the Radio, Media or Setup menus,
press the control button for Sound.
– Turn the rotary pushbutton to Volume settings and press
it.
– Turn the rotary pushbutton to select Speech dialogue
system
page 170, fig. 153 and press to confirm.
– To set the basic volume, turn the rotary pushbutton
clockwise or anti-clockwise. A test cue will then be trans-
mitted.
– Press the rotary pushbutton to store your settings.
Applies to vehicles: with multi-function steering wheel and speech dialogue system
Help functions
The speech dialogue system offers you two help func-
tions: The help commands and the guided dialogue
assistance.
Help commands
If the speech dialogue system is activated
page 170, you can say
a help command. Important commands are:
•HELP
•HELP MMI
•HELP RADIO
•HELP CD
•HELP DIRECTORY
•HELP TELEPHONE*
•HELP NAVIGATION*
The system will display possible commands in the MMI screen

fig. 154 and will also speak the commands.
Guided dialogue assistance
If the speech dialogue system is activated
page 170 and you do
not say a command, the speech dialogue system will ask .
If you still give no command, the speech dialogue system will
suggest important commands.
Example of guided dialogue assistance (telephone* function acti-
vated):
Fig. 154 Help texts in
MMI display
Operation/
CommandCue from
speech dialogue system
Press talk button
brieflyAcoustic signal:
No command given
No command given
are:>