2008 Alfa Romeo 166 transmission oil

18
To insert the metallic insert in the key
grip, keep button (B-fig. 6) pressed
and turn the insert on the direction of the
arrow until it clicks into place, then re-
lease the button (B).
To open/close the doors by remote con-
trol, press button (C). On cars fitted with
electronic alarm system, pressing button
(C) also turns the electronic alarm on/off
and the led (D) (where required) flashes
while the transmitter sends the code to
the receiver. This rolling code changes at
each transmission.
IMPORTANTIf led (D) (where re-
quired) flashes only once briefly when
button (C) is pressed, the battery need
changing as described below.Opening the boot
The boot can be opened by remote
control from outside pressing button (E-
fig. 6), also when the electronic alarm
(where fitted) is on.
In this case the alarm disengages the
boot control sensor, the system (with the
exception of versions for certain markets)
sounds two beeps and the direction indi-
cators light up for about three seconds.
When the boot is closed again the con-
trol function is restored, the system (with
the exception of versions for certain mar-
kets) sounds two beeps and the direction
indicators light up for about three sec-
onds.
When button (B) is pres-
sed, take the utmost care
to prevent the metal insert from
causing injury or damage when it
comes out. Button (B) must only be
pressed when the key is away
from the body, in particular the
eyes, and from objects that could
be spoilt (e.g. clothes).
Never leave the key unattended to
prevent anyone, especially chil-
dren, from holding it and pressing
button (B) inadvertently.
WARNING

206 ANNUAL INSPECTION
PLAN
An annual inspection plan has
been established for cars that cov-
er less than 20,000 km a year
(e.g. 10,000 km). It consists of
the following:
– Checking the condition/wear of tyres,
and adjusting pressure (including the com-
pact spare wheel, where applicable).
– Checking the lighting system (head-
lights, turn indicators, hazard warning
lights, boot light, passenger compart-
ment, warning lights of instrument panel,
etc.).
– Checking the working order of the
windscreen wiper-washer and adjusting
the nozzles.
– Checking the positioning/wear of the
windscreen wipers.
– Checking the condition and wear of
the front brake pad.– Sight inspect the conditions of: en-
gine, gearbox, transmission, pipes and
hoses (exhaust - fuel - brakes), rubber
parts (boots, sleeves, bushes, etc.).
– Check for bonnet and boot lock clean-
ness, lever cleanness and lubrication.
– Check battery charge and fluid level
(electrolyte).
– Visually checking the condition of the
belts and various controls.
– Checking and topping up, if neces-
sary, the level of liquids (coolant, brake
fluid, windscreen washer fluid, battery
etc.).
– Change engine oil and oil filter, if re-
quired.
– Check and replace pollen filter, if re-
quired.
– Check and replace air cleaner, if re-
quired.
ADDITIONAL OPERATIONS
Every 1000 kmor before long jour-
neys check and if necessary top up:
– the engine coolant fluid level
– brake fluid/hydraulic clutch control
fluid level
– power steering fluid level
– windscreen washer and headlamp
washer fluid level
– tyre pressure and conditions.
– check light system operation (head-
lights, direction indicators, hazard lights,
etc.).
– check windscreen wiper/washer op-
eration and windscreen/rear window
blade position/wear.
Every 3000 kmcheck the level of
the engine oil and top up if necessary.
Every 5000 km(only for fuel oil en-
gines): drain the condensation water
from the filter. You are recommended to
use products of the FL Selenia, de-
signed and developed expressly for Alfa
Romeo cars (see the table “Fluids and lu-
bricants” in the Technical specifications”
chapter).

231
The following pages give the various specifications of the vehicle.
These pages will probably represent the main reference point in
this booklet for the “experts and enthusiasts”.
This section should be consulted in order to identify the main cha-
racteristics of your vehicle referred to in the previous chapters.IDENTIFICATION DATA...............................................................................page 232
ENGINE CODES-BODY VERSIONS
.....................................................................233
DIMENSIONS
...........................................................................................................234
ENGINE
......................................................................................................................235
SERVICING
................................................................................................................236
ENGINE OIL CONSUMPTION
..............................................................................236
LUGGAGE COMPARTMENT
..................................................................................237
WEIGHTS
...................................................................................................................237
FUEL SUPPLY - IGNITION
....................................................................................238
PERFORMANCE
.......................................................................................................239
FUEL CONSUMPTION
............................................................................................240
CO
2EMISSIONS......................................................................................................241
BRAKES
.....................................................................................................................241
STEERING
..................................................................................................................242
TRANSMISSION
.......................................................................................................242
FLUIDS AND LUBRICANTS
..................................................................................243
RIM AND TYRES
....................................................................................................245
TYRE INFLATION PRESSURE
...............................................................................247
RADIO FREQUENCY REMOTE CONTROL:
MINISTERIAL HOMOLOGATIONS
.....................................................................251
TECHNICAL SPECIFICATIONS

244
Mechanical gearbox and
differential 3.2 V6 24V engines
Mechanical gearbox and
differential JTD 20V Multijet
engines
Power steering
CV joints
Hydraulic brake and clutch
controls
Cooling circuits
Proportion: 50% water and
50% Paraflu UP
To be used diluted or undiluted TUTELA CAR
TECHNYX
TUTELA CAR
MATRYX
TUTELA GI/A
TUTELA STAR 500
TUTELA TOP 4
for ALFA ROMEO
PARAFLU UP
TUTELA
PROFESSIONAL SC 35 Synthetic-based oil, grade SAE 75W-85,that passes API GL 4 Plus specifications
100% synthetic oil, grade SAE 75W-85, that passes API GL 4 specifications
Lubricant for transmissions that passes "ATF DEXRON II D LEV" specifications
Lithium-soap-based grease with molybdenum bisulphate, NLGI 2 consistency
Synthetic fluid, F.M.V.S.S. n. 116, DOT 4, ISO 4925, SAE J-1704,
CUNA NC 956-01
Protective with antifreeze action for cooling systems, red colour, based on
inhibited monoethylen glycol and organic formula, that passes
CUNA NC 956-16, ASTM D 3306 specifications
Mixture of alcohol and surfactants CUNA NC 956-11
Use Fluid and lubricant specifications Genuine fluids Applications
for correct car operation and lubricants
Lubricants and greases
for transmission
Brake fluid
Protective agent
for radiators
Windscreen and rear
windowwasher fluid
IMPORTANT Do not top-up or mix with products having different properties