2008 Acura TSX display

Playing Discs
186
CD SLOT
CD LOAD INDICATOR
LOAD BUTTON
SEEK/SKIP BARSCAN BUTTON
CD/AUX BUTTON CH DISC BAR
UPPER DISPLAY
DISC SCAN ICON TRACK REPEAT ICON
TRACK SCAN ICON CH DISC ICONS
SOUND ICON
TRACK RANDOM ICON
DISC REPEAT ICON
With navigation system
TRACK ICON
DISC ICON
U.S. model is shown. AUDIO BUTTON
\f—\f—
y

y
(\fy\f

y
2008 TSX

CONT INUED
To load multiple discs in one
operation:Press the LOAD button until you
hear a beep and see ‘‘LOAD’’ on
the display.
To load only one CD, press and
release the LOAD button.
The disc number f or an empty
position is highlighted and the red
light starts blinking.
Insert the disc into the CD slot
when the green CD load indicator
comes on. Insert it only about
half way; the drive will pull it in the
rest of the way. You will see
‘‘BUSY’’ on the display as the CD
load indicator turns red and blinks
as the CD is loaded. You cannot load and play 3-inch
(8-cm)discsinthissystem.
When the CD load indicator turns
green and ‘‘LOAD’’ appears on the
display again, insert the next CD
in the slot.
Do not try to insert a disc until
‘‘LOAD’’ appears. You could
damage the audio unit.
Repeat steps 1 through 3 until all
six positions are loaded. If you are
not loading all six positions, the
system begins playing the last CD
loaded.
Your audio system has an in-dash
CD changer that holds up to six CDs,
providing several hours of
continuous entertainment. You
operate this CD changer with the
same controls used f or the radio.
To load CDs or operate the CD
changer, the ignition switch must be
in the ACCESSORY (I) or ON (II)
position.
For best results when using CD-R or
CD-RW discs, use only high quality
discs labeled f or audio use. When
recording a CD-R or CD-RW, the
recordingmustbeclosedinorder
f or the disc to be played by the CD
player. 1.
2.
3.
4.
5.
L oading CDs in the Changer
Operating the CD Changer
Playing Discs
Features
187
Do not use CDs with adhesive labels.
The label can curl up and cause the CD
to jam in the unit.
\f—\f—
y



y
(\fy\f
y
2008 TSX

µ
µ
´
Û
Ý
If you are not loading CDs into all six
positions, press the LOAD button
again after the last CD has loaded.
The system will begin playing the
last CD loaded.
If you stop loading discs bef ore all
six positions are f illed, the system
will wait f or 15 seconds, stop the load
operation, and begin playing the last
disc loaded.
When that CD ends, the next CD in
the CD changer is loaded and played.
Af ter the last CD f inishes, the
system returns to the f irst CD.To select a dif f erent disc, press an
appropriate preset button (1 6) or
use the Preset 5 (DISC ) to select
the previous disc or Preset 6 (DISC
) to select the next disc in
sequence. On vehicles with
navigation system, touch the
appropriate disc icon or press the
or side of the CH/DISC bar. If
youselectanemptypositioninthe
CD changer, the system will try to
load the CD in the next available slot.
Select the CD changer by pressing
the CD button. You will see ‘‘CD’’ on
the display. The system will begin
playing the last selected CD in the
CD changer. You will see the disc
and track numbers displayed.
You can also load a CD into an empty
position while a CD is playing. Select
the empty position (the disc number
indicator is not highlighted) and
press the appropriate preset button
or touch a disc icon. The current CD
stops playing and starts the loading
sequence. The CD just loaded will
play.
Playing Discs
To Play a CD
188
\f—\f—
y

\fy
(\fy\f
y
2008 TSX

µµµ
µ
µOn vehicles without navigation system
CONT INUED
Each time you
press and release the side of
the SEEK/SKIP bar, the system
skips forward to the beginning of the
next track. Press and release the side of the bar to skip
backward to the beginning of the
current track. Press it again to skip
to the beginning of the previous
track.
The RANDOM
function plays the tracks within a CD
in random order, rather than in the
order they are recorded on the CD.
To activate it, press the RDM button.
You will see RDM on the display as a
reminder. The system will then select and play tracks randomly.
This continues until you deactivate
RANDOM by pressing the RDM
button again.
Press and hold
the RPT button to continuously
replay the current CD. You will see
D-RPT on the display as a reminder.
Press the button again to turn it off. To activate the repeat
f eature, press and release the RPT
button. You will see RPT on the
display as a reminder. The system
continuously replays the current
track. Press the RPT button again to
turn it off. Pressing either of the
SKIP bar also turns of f the repeat
feature.
The available CD f unctions are
described as f ollows.
The SCAN f unction
samples all the tracks on the
selected disc in the order they are
recorded on the CD. To activate it,
press and release the SCAN button.
You will see SCAN on the display as
a reminder. The system will then
play the f irst track f or approximately
10 seconds. If you do nothing, the
system will then play the f ollowing
tracks f or 10 seconds each. When it
plays a track that you want to
continue listening to, press the
SCAN button again.
To move rapidly within a track, press
and hold the or side of the
SEEK/SKIP bar.
Playing Discs
SEEK /SK IP
RANDOM
DISC REPEAT
REPEATSCAN
Features
189
\f—\f—
y

y
(\fy\f
y
2008 TSX

µµ
This f eature, when
activated, samples the first track of
all the discs in the CD changer in the
order they are stored. To activate
the DISC SCAN feature, press and
hold the SCAN button. You will see
D-SCAN on the display as a
reminder. The system will then play
the first track of the first CD for
approximately 10 seconds. If you do
nothing, the system will then play
the next CD’s first track. When it
plays a disc that you want to
continue listening to, press the
SCAN button again. This f unction
samples all the tracks on the
selected disc in the order they are
recorded on the CD. To activate it,
touch the TRACK SCAN icon or
press and release the SCAN button.
You will see SCAN on the lef t side of
TRACKicononthedisplayasa
reminder. SCAN also appears on the
upper display. The system will then
play the f irst track f or approximately
10 seconds. If you do nothing, the
system will then play the f ollowing
tracks f or 10 seconds each. When it
plays a track that you want to
continue listening to, touch the
TRACK SCAN icon or press the
SCAN button again.
Press the AUDIO button to view the
available CD control icons on the
display. The icon f unctions are
described as f ollows.On vehicles with navigation system
Playing Discs
DISC SCAN
T RACK SCAN
190
\f—\f—
y

y
(\fy\f
y
2008 TSX

µµµ µ
This f unction
samples the first track of all the
discs in the CD changer in the order
they are stored. To activate it, touch
the DISC SCAN icon or press and
hold the SCAN button. You will see
SCANontheleftsideof theDISC
icon on the display as a reminder.
D-SCAN also appears on the upper
display. The system will then play
the first track of the first CD for
approximately 10 seconds. If you do
nothing, the system will then play
the next CD’s first track. When it
plays a disc that you want to
continue listening to, touch the DISC
SCAN icon or press the SCAN
button again. Touch the
TRACK REPEAT icon to
continuously replay a track. You will
see REPEAT on the lef t side of the
TRACKicononthedisplayasa
reminder. RPT also appears on the
upper display. Press the icon again to
turn it off.
Touch the DISC
REPEAT icon to continuously replay
the current CD. You will see
REPEATontheleftsideof theDISC
icon. D-RPT also appears on the
upper display. Press the icon again to
turn it off. The TRACK
RANDOM f unction plays the tracks
within a CD in random order, rather
than in the order they are recorded
on the CD. To activate it, press the
TRACK RANDOM icon. You will see
RANDOM on the lef t side of the
TRACKicononthedisplayasa
reminder. The system will then
select and play tracks randomly.
This continues until you deactivate
TRACK RANDOM by touching the
TRACK RANDOM icon again.
Playing Discs
DISC SCA N T RA CK REPEA T
DISC REPEAT TRACK RANDOM
Features
191
\f—\f—
y

y
(\fy\f
y
2008 TSX

To take the system out of CD mode,
press the AM/FM or CD/AUX, or
CD/AUX/XM button to switch to
the radio or satellite radio (U.S.
models only), or optional tape player
(if a tape is loaded) while a CD is
playing. When you return to CD
mode by pressing the CD/AUX or
CD/AUX/XM button, play will
continue at the same point that it lef t
off.To remove the disc that is currently
playing, press and release the eject
( ) button. You will see EJECT
in the display. When you remove the
disc from the slot, the system begins
the load sequence so you can load
another disc in that position. If you
do not load another CD within 15
seconds, the system selects the
previous mode [AM, FM1, FM2, or
XM Radio (U.S. models)].
If you do not remove the CD f rom
the slot, the system will reload the
CD af ter 15 seconds and put the CD
changer in pause mode. To begin
playing the CD, press the CD button.
To remove a different CD from the
changer,firstselectitwiththe
appropriate preset button, or the
appropriate icon or CH/DISC bar.
When that CD begins playing, press
the eject button.Af ter that disc is ejected, pressing
the eject button again will eject the
next disc in numerical order. By
doing this six times, you can remove
all the CDs f rom the changer.
If you press the eject button while
listening to the radio, or with the
audio system turned of f , the disc
that was last selected is ejected.
In any mode, if you press the eject
button and hold it until you hear a
beep, the system will eject all of the
discs in the changer.
You can also eject discs when the
ignition switch is of f by pressing the
eject button. The disc that was last
selected is ejected f irst. You can
eject up to 5 discs, one at a time.
If you turn of f the system while a CD
is playing, either by pushing the
VOL/PWR knob or by turning of f
the ignition, the CD will stay in the
drive. When you turn the system
back on, it will begin at the same disc
and track.
Playing Discs
T o Stop Playing a CD
Removing CDs f rom the Changer
192
\f—\f—
y

y
(\fy\f
y
2008 TSX

Thechartontherightexplainsthe
error messages you may see in the
display while playing a disc.
If you see an error message in the
display while playing a disc, press
the eject button. After ejecting the
disc, check it for damage or
deformation. If there is no damage,
insert the disc again.
For the additional information of the
damaged discs, see page .
Theaudiosystemwilltrytoplaythe
disc. If there is still a problem, the
error message will reappear. Press
the eject button, and pull out the disc.
Insert a dif f erent disc. If the new
disc plays, there is a problem with
the f irst disc. If the error message
cycle repeats and you cannot clear it,
take your vehicle to a dealer.Error
Message Cause
Solution
195
High Temperature
Track/File format not
supported
Mechanical Error
Servo Error Will disappear when the temperature returns to
normal.
Current track will be skipped. The next
supported track or file plays automatically.
Press the EJECT button and pull out the disc(s).
Check the disc for serious damage, signs of
deformation, excessive scratches, and/or dirt
(see page195).Insert the disc again. If the code
does not disappear, or the disc(s) cannot be
removed, consult your dealer, Do not try to
force the disc out the player.
CD Player Error Messages
Features
193
HEAT ERROR
FORMAT
BAD DISC
PLEASE CHECK OWNER’S
MANUAL PUSH EJECT
BAD DISC
PLEASE CHECK OWNER’SMANUAL
\f—\f—
y

\fy
(\fy\f
y
2008 TSX