2008 Acura TL change time

The lef t or right turn signal indicator
blinks when you signal a lane change
or turn. If an indicator does not blink
or blinks rapidly, it usually means
one of the turn signal bulbs is
burned out (see page ). Replace
the bulb as soon as possible, since
other drivers cannot see that you are
signaling.If this indicator comes on when the
ignition switch is turned to the ON
(II) position and the parking brake is
released, it means there is a problem
in the circuit. Have your vehicle
checked by your dealer.
This indicator comes on with the
high beam headlights. See page
f or inf ormation on the headlight
controls. This indicator reminds you that the
exterior lights are on. It comes on
when the light switch is in either the
or position. This indicator
will also come on when the light
switch is in AUTO and the lights
turn on automatically. If you turn the
ignition switch to the ACCESSORY
(I) or the LOCK (0) position without
turning of f the light switch, this
indicator will remain on. A reminder
chime will also sound when you open
the driver’s door.
When you press the hazard warning
button, both turn signal indicators
and all turn signals on the outside of
the vehicle f lash. 86
298
Turn Signal and
Hazard Warning
Indicators
Lights On Indicator
High Beam Indicator
Daytime Running L ights
Indicator
Instrument Panel Indicators
62
\f—\f—
y
\f\f\fy
(%\fy\f\fy
2008 TL

ÛÝÛÝ
The multi-inf ormation display in the
instrument panel displays various
inf ormation and messages when the
ignition switch is in the ON (II)
position. Some of the messages help
you operate your vehicle more
comf ortably.
Others help to keep you aware of the
periodic maintenance your vehicle
needs f or continued trouble-f ree
driving.
When you open the driver’s door, a
‘‘Welcome’’ message is shown on the
multi-inf ormation display.
To change the display, press the
INFO( / )buttononthesteering
wheel repeatedly until the main
menu appears (see page ).With the ignition switch in the ON
(II) position, the multi-inf ormation
display changes as shown on page
each time you press the INFO
( / ) button or SEL/RESET
button.
When you turn the ignition switch to
the ON (II) position, what you last
selected is displayed.
In the multi-information display, the
system message is also displayed
(see page ) and you can
customize your vehicle control
settings (see page ).
69 69
6877
Multi-Inf ormation Display
66
SEL/RESET
BUTTON
INFO BUTTONS
\f—\f—
y
\f

y
(%\fy\f\f
y
2008 TL

Ý
Themessagesinthisdisplay
indicate:
When you press the INFO ( )
button, the display changes as shown
above. This is the estimated distance
you can travel on the fuel remaining
in the tank. This distance is
estimated f rom the f uel economy
you received over the last several
miles (kilometers), so it will vary
withchangesinspeed,traffic,etc.It
measures miles in U.S. models and
kilometers in Canadian models.
TIME: Time traveled
To reset the values in the trip
computer,pressandholdtheSEL/
RESET button until the values reset. AVG MPG (U.S. models)/AVG
L/100 KM (Canadian models):
Average f uel economy
AVG MPH (U.S. models)/AVG
km/h (Canadian models): Average
vehicle speed
DISTANCE: Distance traveled
Multi-Inf ormation Display
74
U.S.
Canada U.S.
Canada
\f—\f—
y
\f
y
(%\fy\f\fy
2008 TL

ÎÎÎ
ÎÎ
ÎÎ ÎÎ
ÎÎ
Î
ÎÎ Menu Item
AUTO DOOR LOCK
AUTO DOOR UNLOCK (AT)
AUTO DOOR UNLOCK (MT)
KEY AND REMOTE UNLOCK
MODE
KEYLESS LOCK
ACKNOWLEDGMENT Setting Option
SHIFT FROM P
WITH VEH SPD
OFF
SHIFT TO P
DRIVER DOOR
SHIFT TO P
ALL DOORS
IGN OFF
DRIVER DOOR
IGN OFF
ALL DOORS
OFF
IGN OFF
DRIVER DOOR
IGN OFF
ALL DOORS
OFF
ALL DOORS
BEEP ON
BEEP OFF
Description
Changes the setting of when to automatically lock the
doors
Changes the setting of when to automatically unlock
the driver’s/all the doors.
Changes the setting of when to automatically unlock
the driver’s/all doors.
Changes which doors unlock with the remote
transmitter when the button is first pushed
The exterior lights flash each time you press the
LOCK or UNLOCK button. A beeper will also sound
when you press the LOCK button twice.
Setup Category
DOOR SETUP Page
P.79
P.80
P.80
P.81
P.81
: Automatic transmission model only : Default setting
CONT INUED
DRIVER’S DOOR
Multi-Inf ormation Display
Inst rument s and Cont rols
77
\f—\f—
y
\fy
(%\fy\f\fy
2008 TL

ÎÎ
ÎÎ
ÎÎ
ÎÎMenu Item
SECURITY RELOCK TIMER
HEADLIGHT AUT O OFF
TIMER
INTERIOR LIGHT DIMMING
TIME Page
P.81
P.82
P.83
P.83
Description
Changes how long it takes (in seconds) for the doors
to relock and the security system to set af ter you
unlock but do not open the door.
Changes how long (in seconds) the headlights stay on
after you close the driver’s door.
Changes how long (in seconds) the interior lights stay
on after you close the doors.
Changes all the customized settings as default. Setting Option
30 sec
60 sec
90 sec
0sec
15sec
30 sec
60 sec
5sec
15sec
30 sec
SET
CANCEL
Setup Category
DOOR SET UP
LIGHTING SETUP
DEFAULT ALL
: Default setting
Multi-Inf ormation Display
78
——
y
y
(%yy
2008 TL

Ý
To enter the customizing mode,
press the SEL/RESET button while
‘‘Keyless Memory Setting ’’ is
displayed. The display will change as
shown above. The f irst Keyless Memory Setting is
Auto Door Lock.
Select the desired condition by
moving the pointer with the INFO
( ) button and enter your selection
by pressing the SEL/RESET button.
OFF: The auto door lock is
deactivated all the time.
There are two (manual
transmission) or three (automatic
transmission) possible settings:
15 km/h: The doors will lock when
the vehicle speed reaches 15 km/h.
10 mph: The doors will lock when
the vehicle speed reaches 10 mph.
SHIFT FROM P: The doors will lock
whenever you move the shif t lever
out of P. (Models with automatic
transmission.)
Auto Door Lock
On Canadian models
On U.S. models
CONT INUED
Multi-Inf ormation Display
Inst rument s and Cont rols
79
U.S.
Canada
(AT)
(MT)
(AT) (MT)
TM
\f—\f—
y
\f
y
(%\fy\f\fy
2008 TL

Ý
Ý
Security Relock Timer
Keyless Lock Acknowledgment
Key and Remote Unlock Mode
If you unlock the doors with the
remote transmitter, but do not open
any of the doors within 30 seconds,
the doors automatically relock and
the security system sets.
You can change this relock time
f rom 30 seconds to 60 or 90 seconds.
When you push the LOCK button a
second time within 5 seconds after
you lock the doors with the remote
transmitter, a beeper will sound to
verify that doors are locked and the
security system has set.
If you do not want the beeper to
sound, select ‘‘BEEP OFF’’ with the
INFO ( ) button and enter your
selection by pressing the SEL/
RESET button.
You can select whether the driver’s
door or all the doors unlock when
youpresstheunlockbuttononthe
remote transmitter first time.
Select the desired setting ‘‘DRIVER
DOOR’’ or ‘‘ALL DOORS’’ by
pressing the INFO ( ) button and
enter your selection by pressing the
SEL/RESET button.
CONT INUED
Multi-Inf ormation Display
Inst rument s and Cont rols
81
\f—\f—
y
\f\fy
(%\fy\f\fy
2008 TL

ÝÝ
Select the desired relock time by
moving the pointer with the INFO
( ) button and enter your selection
by pressing the SEL/RESET button. The headlights, parking lights, side
marker lights, taillights, and license
plate lights go of f af ter the selected
time when you close the driver’s
door.
You can change how long the lights
stay on bef ore they go of f as
described next.
Select the desired time (‘‘0s, 15s, 30s
or 60s’’) by moving the pointer with
the INFO ( ) button and enter your
selection by pressing the SEL/
RESET button.
Headlight Auto Of f Timer
Multi-Inf ormation Display
82
\f—\f—
y
\f
y
(%\fy\f\fy
2008 TL