2008.5 Peugeot 1007 Dag Owner's Manual

184
The traffi c announcement
(TA) is displayed. I do
not receive any traffi c
information. Tune to a radio station which broadcasts traffi c
information.
The radio station is not part of the regional traf
fi c information network.
QUESTION
SOLUTION
RESPONSE
The quality of reception
of the radio station
listened to gradually
deteriorates or the
stored stations do
not function (no
sound, 87.5 Mhz is
displayed...). The vehicle is too far from the transmitter used b
y the station listened to or
there is no transmitter in the geographical area th rough which the vehicle
is travelling.
The environment (hills, buildings, tunnels, baseme nt car parks...) block
reception, including in RDS mode.
The aerial is absent or has been damaged (for exam ple when going
through a car wash or into an underground car park) . Activate the RDS function to enable the system
to check whether there is a more powerful
transmitter in the geographical area.
This phenomenon is normal and does not
indicate a failure of the audio equipment.
Have the aerial checked by a PEUGEOT dealer.
Sound cut-outs of 1
to 2 seconds in radio
mode. During this brief sound cut-out, the RDS searches
for any frequency
permitting better reception of the station. Deactivate the RDS function if the phenomenon
is too frequent and always on the same route.
With the engine off,
the audio equipment
switches off after a few
minutes of use. When the engine is switched off, the audio equipme
nt operating time
depends on the battery charge.
The switch-off is normal: the audio equipment swit ches to economy mode
and switches off to prevent discharging of the vehi cle's battery. Start the vehicle's engine to increase the battery
charge.
The stored stations do
not function (no sound,
87.5 Mhz is displayed...)
An incorrect waveband is selected.
Press the BAND AST button to return to the
waveband (AM, FM1, FM2, FMAST) on which the
stations are stored.
The message "the audio
system is overheated"
appears on the display. Switch the audio system off for a few minutes to
allow the system to cool.
In order to protect the installation if the surrou
nding temperature is too
high, the audio equipment switches to an automatic thermal protection
mode leading to a reduction of the volume or stoppi ng of the playing of the
CD.

185
QUESTION SOLUTION
RESPONSE
The TRAFFIC INFO
box is ticked. However,
certain traffi c jams
along the route are not
indicated in real time. On starting, it is several minutes before the syst
em begins to receive the
traffi c information. Wait until the traffi c information is being receiv
ed
correctly (displaying of the traffi c information
symbols on the map).
In certain countries, only major routes (motorways , ...) are listed for the
traffi c information.
The time taken to
calculate a route
sometimes seems
longer than usual. This phenomenon is normal. The system is
dependent on the traffi c information available.
The performance of the system may slow down tempor arily if a CD is
being copied onto the Jukebox at the same time as a route is being
calculated. Wait until the CD has been copied or stop the
copying before starting the guidance function.
Does the emergency call
function work without a
SIM card? No, European regulations impose the presence of a
SIM card in order to
make an emergency call. Insert a valid SIM card in the slot on the WIP Com
.
My SIM card is not
recognised. The WIP Com accepts 3.3 V SIM cards, the old 5 V a
nd 1.8 V SIM cards
are not recognised. Contact your telephone operator.
After changing a wheel,
the system loses its
location. The WIP Com uses the wheel rotation information to
improve the GPS
locating function. If a wheel is changed or defl ate s suddenly, the system
recalculates the location. For approximately ten mi nutes, this recalculation
may affect the quality of the locating function. The altitude is not displayed.
Wait until the system has completed its
recalculation.
The table below groups together the answers to the
most frequently asked questions concerning the WIP Com.
The location on the
map is incorrect or
inaccurate. On starting, the initialisation of the GPS may t
ake up to 3 minutes to
receive more than 4 satellites correctly. Wait until the system has started up completely.
Check that there is a GPS coverage of at least
4 satellites (long press on the MENU button, then
select AUDIO/TELEPHONE DIAGNOSTICS, then
GPS COVERAGE).
Depending on the geographical environment (tunnel, ...) or the weather,
the conditions of reception of the GPS signal may v ary. This phenomenon is normal. The system is
dependent on the conditions of reception of the
GPS signal.

186
The route calculation is
not successful. The exclusion criteria may confl ict with the curre
nt location (exclusion of
toll roads on a toll motorway). Check the exclusion criteria.
QUESTION
SOLUTION
RESPONSE

169
WIP Sound
CONTENTS

170
11
22
10101111
131314141515
33445566778899
1212
01 FIRST STEPS
1. On/Off and volume adjustment.
2. CD eject.
3. Selection of the display on the screen from the mo des:
Audio (AUDIO), Trip Computer (TRIP) and Hands-Free Kit
(TEL) functions.
4. Selection of the source: radio, audio CD/MP3 CD,
CD changer, USB, Jack connection.

5. Selection of the FM1, FM2, FMast and AM wavebands.
6. Setting the audio options: front/rear balance, lef t/right
balance, loudness, sound ambiences.
7. Displaying of the list of local stations, of the t racks on the CD
or of the MP3 directories. 8.
Abandon current operation.
9. TA (Traffi c Announcement) function on/off.
Long press: access to the PTY (TYpes of radio Programme) mode.
10. Confi rmation.
11. Automatic search for a lower/higher frequency.
Selection of previous/next CD, MP3 or USB track.
12. Selection of a lower/higher radio frequency.
Selection of the previous/next CD.
Selection of the previous/next MP3 directory.
Selection of the previous/next USB equipment directory/genre/artist/playlist. 13.
Displaying of the general menu.
14. Buttons 1 to 6:
Selection of a stored radio station.
Selection of a CD in the CD changer.
Long press: storing of a station.
15. The DARK button changes the display on the screen
to improve driving comfort at night.
1st press: lighting of the top banner only.
2nd press: displaying of a black screen.
3rd press: return to the standard display.

171
02 GENERAL MENU
AUDIO FUNCTIONS: radio, CD,
USB, options.
TRIP COMPUTER: warnings, status of
functions. TELEPHONE: hands-free kit,
matching, management of a
communication.
PERSONALISATION-CONFIGURATION:
vehicle parameters, display, languages.
> MONOCHROME DISPLAY C
> MONOCHROME DISPLAY A For a detailed global view of the
menus available, refer to the
"Display fl ow charts" section of
this chapter.

172
22
33
44
11
22
44
33
11
03 AUDIO
Press the SOURCE button several times in succession and select the radio.
Press the BAND AST button to select a waveband: FM1, FM2, FMast, AM.
Briefl y press one of the buttons to carry out an automatic search of the radio stations.
Press one of the buttons to carry out a manual search of the radio stations.
Press the LIST REFRESH button to display the list of stations received locally (30 stations maximum). To update this list, press for more than two seconds.
Select ACTIVATE FREQUENCY
FOLLOWING (RDS) then press OK.
RDS appears on the display.
Select the FM WAVEBAND
PREFERENCES function then press
OK.
Select AUDIO FUNCTIONS then
press OK.
Press the MENU button.
FM WAVEBAND PREFERENCES
ACTIVATE FREQUENCY FOLLOWING (RDS)
The external environment (hills, buildings, tunnel
s, basement car parks) may block reception, includi ng
in RDS mode. This is a normal effect of the way in which radio waves are transmitted and does not
indicate any failure of the audio equipment.
RDS
The RDS, if displayed, enables you to continue l istening to the
same station by means of frequency following. Howev er, in certain
conditions, this RDS station is not followed throug hout the country
as radio stations do not cover 100 % of the territo ry. This explains
the loss of reception of the station during a journ ey.
RADIO
SELECTING A STATION

173
11
22
11
22
Insert circular compact discs only.
Some anti-pirating systems, on original discs or CDs
copied using a personal recorder, may cause faults
which are no refl ection on the quality of the origi nal
player.
Without pressing the EJECT button, insert a CD in the
player, play begins automatically.
To play a disc which has already been
inserted, press the SOURCE button
several times in succession and select
CD. Press one of the buttons to select a
track on the CD.
Press the LIST REFRESH button to
display the list of tracks on the CD.
Press and hold one of the buttons for
fast forward or backward play. Insert an MP3 compilation in the player.
The audio equipment searches for all of the music
tracks, which may take anything between a few secon
ds
and several tens of seconds, before play begins.
On a single disc, the CD player can read up to 255 MP3 fi les spread
over 8 directory levels. However, it is advisable t o keep to a limit of
two levels to reduce the access time before the CD is played.
While the CD is being played, the directory fl ow c hart is not followed.
All of the fi les are displayed on a single level.
To play a disc which has already been
inserted, press the SOURCE button
several times in succession and
select CD. Press one of the buttons to select a
track on the CD.
Press the LIST REFRESH button to
display the list of directories of the
MP3 compilation.
Press and hold one of the buttons for
fast forward or backward play.
CD
PLAYING A CD
MP3 CD
PLAYING AN MP3 COMPILATION