Page 7 of 207
FAMILIARISATION SIT COMFORTABLY
Driver's seat adjustment
Forwards-backwards
46
Seat back angle
Height
Page 71 of 207
!
i
66
VISIBILITY In fog or snow, the brightness
s e n s o r m a y d e t e c t s u f fi c i e n t l i g h t .
Therefore, the lights will not come
on automatically.
Do not cover the brightness sen-
sor, linked with the rain sensor and
located in the centre of the winds-
creen behind the interior mirror; the
associated functions would no lon-
ger be controlled.
Linked with the "Guide-me-home"
lighting
Association with the automatic lighting
provides the "guide-me-home" lighting
with the following additional options:
- automatic activation of "guide-me-
home" lighting when automatic
lighting is switched on (in the vehicle
parameters of the multifunction dis-
p l a y c o n fi g u r a t i o n m e n u ) ,
- selection of the duration of main- taining of the lighting for 15, 30 or
60 seconds in the vehicle para-
meters of the multifunction display
c o n fi g u r a t i o n m e n u ( e x c e p t f o r
monochrome display A where this
i s p r e s e t ) .
Operating fault In the event of a malfunction
of the brightness sensor,
the lights come on, this war-
ning light is displayed on the
instrument panel and/or a message
appears on the multifunction display,
accompanied by an audible signal.
Consult a CITROËN dealer.
MANUAL HEADLAMP ADJUSTMENT
The initial setting is position "0" .
To avoid causing a nuisance to other
road users, the height of the halogen
headlamps should be adjusted in rela-
tion to the load in the vehicle.
0. 1 or 2 people in the front seats.
-. Less than 5 people.
1. 5 people.
-. 5 people + maximum authorised load.
2 - 3. Driver + maximum authorised load.
Page 72 of 207
!
i
66
VISIBILITY In fog or snow, the brightness
s e n s o r m a y d e t e c t s u f fi c i e n t l i g h t .
Therefore, the lights will not come
on automatically.
Do not cover the brightness sen-
sor, linked with the rain sensor and
located in the centre of the winds-
creen behind the interior mirror; the
associated functions would no lon-
ger be controlled.
Linked with the "Guide-me-home"
lighting
Association with the automatic lighting
provides the "guide-me-home" lighting
with the following additional options:
- automatic activation of "guide-me-
home" lighting when automatic
lighting is switched on (in the vehicle
parameters of the multifunction dis-
p l a y c o n fi g u r a t i o n m e n u ) ,
- selection of the duration of main- taining of the lighting for 15, 30 or
60 seconds in the vehicle para-
meters of the multifunction display
c o n fi g u r a t i o n m e n u ( e x c e p t f o r
monochrome display A where this
i s p r e s e t ) .
Operating fault In the event of a malfunction
of the brightness sensor,
the lights come on, this war-
ning light is displayed on the
instrument panel and/or a message
appears on the multifunction display,
accompanied by an audible signal.
Consult a CITROËN dealer.
MANUAL HEADLAMP ADJUSTMENT
The initial setting is position "0" .
To avoid causing a nuisance to other
road users, the height of the halogen
headlamps should be adjusted in rela-
tion to the load in the vehicle.
0. 1 or 2 people in the front seats.
-. Less than 5 people.
1. 5 people.
-. 5 people + maximum authorised load.
2 - 3. Driver + maximum authorised load.
Page 105 of 207
Height adjustment
Seat belt not fastened/unfastened
warning light
Fastening
Pull the strap, then insert the tongue
in the buckle.
Check that the seat belt is fastened
correctly by pulling the strap.
To lower the attachment point,
squeeze the control A and slide it
downwards.
To raise the attachment point, slide
the control A upwards.
When the ignition is switched
on, this warning light comes on,
either on the instrument panel
or on the seat belt and passen-
ger’s front air bag warning lights display,
if the driver and/or the front passenger
has not fastened his seat belt.
From approximately 12 mph (20 km/h)
t h i s w a r n i n g l i g h t fl a s h e s f o r t w o m i n u t e s
accompanied by an audible signal. Once
these two minutes have elapsed, this
warning light remains on until the driver
and/or the front passenger fastens his
seat belt.
Unfastening
Press the red button on the buckle.
Guide the seat belt as it rolls up. SEAT BELTS
Front seat belts
T h e f r o n t s e a t b e l t s a r e fi t t e d w i t h a p r e -
tensioning and force limiting system.
This system improves safety in the front
seats in the event of a front impact.
Depending on the severity of the
impact, the pretensioning system
instantly tightens the seat belts against
the body of the occupants.
The pretensioning seat belts are active
when the ignition is on.
The force limiter reduces the pressure
of the seat belt on the chest of the occu-
pant, so increasing his protection.
