4 - 65
ENGBALANCER
ASSEMBLY AND INSTALLATION
Balancer, balancer drive gear and balancer
driven gear
1. Install:
Balancer driven gear 1
NOTE:
Install the balancer driven gear and balancer
shaft with their lower splines a aligning with
each other.
2. Install:
Balancer drive gear 1
NOTE:
Align the punched mark a on the balancer
drive gear with the punched mark b on the
balancer driven gear.
Install the balancer driven gear and crank-
shaft with the lower splines c aligning with
each other.
3. Install:
Lock washer 1
Nut (balancer driven gear) 2
Primary drive gear 3
Conical washer 4
Nut (primary drive gear) 5
Straight key 6
Balancer 7
Lock washer 8
Nut (balancer) 9
NOTE:
Apply engine oil to the contact surface and
threaded portion of the nut (primary drive
gear).
Place an aluminum plate a between the
teeth of the balancer drive gear 0 and bal-
ancer driven gear A.
Install the primary drive gear with its weight
reduction holes b facing the engine.
Install the conical washer with its convex sur-
face c outward.
4. Bend the lock washer tab.
a 0
1A
2
T R..50 Nm (5.0 m · kg, 36 ft · lb)
E
A
0a
c b
5
4
3
T R..110 Nm (11.0 m · kg, 80 ft · lb)
T R..45 Nm (4.5 m · kg, 33 ft · lb)
