2007 YAMAHA YZ250F radiator cap

KAPITEL 4
MOTOR
SITZBANK,
KRAFTSTOFFTANK UND
SEITENABDECKUNGEN............ 4-1
AUSPUFFKRÜMMER
UND SCHALLDÄMPFER............ 4-3
KÜHLER...................................... 4-6
VERGASER................................. 4-9
NOCKENWELLEN.................... 4-22
ZYLINDERKOPF....................... 4-31
VENTILE
UND VENTILFEDERN............... 4-34
ZYLINDER UND KOLBEN........ 4-43
KUPPLUNG............................... 4-50
ÖLFILTER, WASSERPUMPE
UND KURBELGEHÄUSEDECKEL
RECHTS.................................... 4-57
AUSGLEICHSWELLE............... 4-64
ÖLPUMPE................................. 4-67
KICKHEBELWELLE
UND SCHALTWELLE............... 4-73
LICHTMASCHINE..................... 4-80
MOTOR DEMONTIEREN.......... 4-84
KURBELGEHÄUSE
UND KURBELWELLE............... 4-89
GETRIEBE, SCHALTWALZE
UND SCHALTGABELN............ 4-98
KAPITEL 5
FAHRWERK
VORDER- UND HINTERRAD..... 5-1
VORDER- UND
HINTERRADBREMSEN............ 5-10
TELESKOPGABEL................... 5-26
LENKER.................................... 5-43
LENKUNG................................. 5-49
SCHWINGE............................... 5-54
FEDERBEIN.............................. 5-62
CHAPITRE 4
MOTEUR
SELLE, RESERVOIR
DE CARBURANT
ET CACHES LATERAUX............. 4-1
TUBE D’ECHAPPEMENT
ET SILENCIEUX............................ 4-3
RADIATEUR................................... 4-6
CARBURATEUR............................ 4-9
ARBRES A CAMES...................... 4-22
CULASSE....................................... 4-31
SOUPAPES ET RESSORTS
DE SOUPAPES.............................. 4-34
CYLINDRE ET PISTON.............. 4-43
EMBRAYAGE............................... 4-50
ELEMENT DE FILTRE
A HUILE, POMPE A EAU
ET COUVERCLE DE CARTER
DROIT............................................ 4-57
BALANCIER................................. 4-64
POMPE A HUILE......................... 4-67
ARBRE DE KICK ET AXE
DE SELECTEUR.......................... 4-73
VOLANT MAGNETIQUE
CDI.................................................. 4-80
DEPOSE DU MOTEUR............... 4-84
CARTER MOTEUR
ET VILEBREQUIN...................... 4-89
BOITE DE VITESSES,
TAMBOUR ET FOURCHETTES
DE SELECTION........................... 4-98
CHAPITRE 5
CHASSIS
ROUE AVANT ET ROUE
ARRIERE......................................... 5-1
FREIN AVANT ET FREIN
ARRIERE....................................... 5-10
FOURCHE..................................... 5-26
GUIDON......................................... 5-43
DIRECTION.................................. 5-49
BRAS OSCILLANT...................... 5-54
AMORTISSEUR ARRIERE........ 5-62
CAPITOLO 4
MOTORE
SELLA, SERBATOIO
CARBURANTE
E FIANCHETTI.............................. 4-1
TUBO DI SCARICO
E SILENZIATORE......................... 4-3
RADIATORE................................... 4-6
CARBURATORE............................ 4-9
ALBERI A CAMME..................... 4-22
TESTATA....................................... 4-31
VALVOLE E MOLLE
VALVOLE...................................... 4-34
CILINDRO E PISTONE............... 4-43
FRIZIONE...................................... 4-50
ELEMENTO FILTRO OLIO,
POMPA DELL’ACQUA
E COPERCHIO CARTER
DESTRO......................................... 4-57
EQUILIBRATORE....................... 4-64
POMPA DELL’OLIO................... 4-67
ALBERO PEDALE E ALBERO
DEL CAMBIO............................... 4-73
MAGNETE CDI............................ 4-80
RIMOZIONE DEL MOTORE..... 4-84
CARTER E ALBERO
MOTORE....................................... 4-89
TRASMISSIONE, CAMMA
DEL CAMBIO E FORCELLA
DEL CAMBIO............................... 4-98
CAPITOLO 5
PARTE CICLISTICA
RUOTA ANTERIORE
E POSTERIORE.............................. 5-1
FRENO ANTERIORE
E POSTERIORE............................ 5-10
FORCELLA ANTERIORE.......... 5-26
MANUBRIO................................... 5-43
STERZO......................................... 5-49
FORCELLONE
OSCILLANTE............................... 5-54
AMMORTIZZATORE
POSTERIORE............................... 5-62

GEN
INFO
1 - 1
DESCRIPTION
EC100000
GENERAL INFORMATION
EC110000
DESCRIPTION
1Clutch lever
2Hot starter lever
3Front brake lever
4Throttle grip
5Radiator cap
6Fuel tank cap
7Engine stop switch
8Kickstarter crank
9Fuel tank
0Radiator
ACoolant drain bolt
BRear brake pedal
CValve joint
DFuel cock
ECold starter knob
FDrive chain
GAir filter
HOil level check window
IShift pedal
JFront forkNOTE:
The machine you have purchased may differ
slightly from those shown in the following.
Designs and specifications are subject to
change without notice.

GEN
INFO
1 - 7
SPECIAL TOOLS
SPECIAL TOOLS
The proper special tools are necessary for complete and accurate tune-up and assembly. Using the
correct special tool will help prevent damage caused by the use of improper tools or improvised
techniques. The shape and part number used for the special tool differ by country, so two types are
provided. Refer to the list provided to avoid errors when placing an order.
NOTE:
For U.S.A. and Canada, use part number starting with “YM-”, “YU-” or “ACC-”.
For others, use part number starting with “90890-”.
Part number Tool name/How to use Illustration
YU-1135-A, 90890-01135 Crankcase separating tool
These tool is used to remove the crankshaft from
either case.YU-1135-A 90890-01135
YM-1189, 90890-01189 Flywheel puller
This tool is used to remove the flywheel magneto.YM-1189 90890-01189
YU-1235, 90890-01235 Rotor holding tool
This tool is used when loosening or tightening the fly-
wheel magneto securing nut.YU-1235 90890-01235
YU-3097, 90890-01252
YU-1256Dial gauge and stand
Stand
These tools are used to check each part for runout or
bent.YU-3097
YU-125690890-01252
YU-90050, 90890-01274
YU-90050, 90890-01275
YU-91044, 90890-04081
YU-90063, 90890-01278Crankshaft installing tool
Crankshaft installing pot
Crankshaft installing bolt
Spacer (crankshaft installer)
Adapter (M12)
These tools are used to install the crankshaft.YU-90050
YU-90063
YU-9104490890-01274
90890-01275
90890-01278
90890-04081
YU-1304, 90890-01304 Piston pin puller set
This tool is used to remove the piston pin.YU-1304 90890-01304
YU-24460-01, 90890-01325
YU-33984, 90890-01352Radiator cap tester
Radiator cap tester adapter
These tools are used for checking the cooling sys-
tem.YU-24460-01
YU-3398490890-01325
90890-01352

SPEC
2 - 9 Lubrication system:
Oil filter type Paper type ----
Oil pump type Trochoid type ----
Tip clearance 0.12 mm or less
(0.0047 in or less)0.20 mm
(0.008 in)
Side clearance 0.09 ~ 0.17 mm
(0.0035 ~ 0.0067 in)0.24 mm
(0.009 in)
Housing and rotor clearance 0.03 ~ 0.10 mm
(0.0012 ~ 0.0039 in)0.17 mm
(0.0067 in)
Cooling:
Radiator core size
Width 120.2 mm (4.7 in) ----
Height 240 mm (9.4 in) ----
Thickness 22 mm (0.9 in) ----
Radiator cap opening pressure 110 kPa (1.1 kg/cm
2, 15.6 psi) ----
Radiator capacity 0.58 L (0.51 Imp qt, 0.61 US qt) ----
Water pump
Type Single-suction centrifugal pump ----Item Standard Limit
MAINTENANCE SPECIFICATIONS

SPEC
2 - 10 Part to be tightened Thread size Q’tyTightening torque
Nm m·kg ft·lb
Spark plug M10S × 1.0 1 13 1.3 9.4
Camshaft cap M6 × 1.0 10 10 1.0 7.2
Cylinder head blind plug screw M12 × 1.0 1 28 2.8 20
Cylinder head (stud bolt) M6 × 1.0 2 7 0.7 5.1
(stud bolt) M8 × 1.25 1 15 1.5 11
(bolt) M9 × 1.25 4 38 3.8 27
(nut) M6 × 1.0 2 10 1.0 7.2
Cylinder head cover M6 × 1.0 2 10 1.0 7.2
Cylinder M6 × 1.0 1 10 1.0 7.2
Balancer weight M6 × 1.0 2 10 1.0 7.2
Balancer shaft driven gear M14 × 1.0 1 50 5.0 36
Timing chain guide (intake side) M6 × 1.0 2 10 1.0 7.2
Timing chain tensioner M6 × 1.0 2 10 1.0 7.2
Timing chain tensioner cap bolt M6 × 1.0 1 7 0.7 5.1
Impeller M8 × 1.25 1 14 1.4 10
Radiator hose clamp M6 × 1.0 10 2 0.2 1.4
Coolant drain bolt M6 × 1.0 1 10 1.0 7.2
Water pump housing M6 × 1.0 4 10 1.0 7.2
Radiator M6 × 1.0 6 10 1.0 7.2
Radiator guard M6 × 1.0 2 10 1.0 7.2
Radiator pipe M6 × 1.0 1 10 1.0 7.2
Oil pump cover M4 × 0.7 1 2 0.2 1.4
Oil pump M6 × 1.0 3 10 1.0 7.2
Oil filter element drain bolt M6 × 1.0 1 10 1.0 7.2
Oil filter element cover M6 × 1.0 2 10 1.0 7.2
Oil strainer (crankcase) M6 × 1.0 2 10 1.0 7.2
Oil delivery pipe 1 (M10) M10 × 1.25 1 20 2.0 14
(M8) M8 × 1.25 2 18 1.8 13
Oil hose M6 × 1.0 2 8 0.8 5.8
Oil hose clamp—120.21.4
Oil strainer (oil tank) M6 × 1.0 1 9 0.9 6.5
Oil tank drain bolt M8 × 1.25 1 18 1.8 13
Oil tank (upper) M6 × 1.0 1 7 0.7 5.1
Oil tank and frame M6 × 1.0 3 9 0.9 6.5
Carburetor joint clamp M4 × 0.7 2 3 0.3 2.2
Air filter joint clamp M6 × 1.0 1 3 0.3 2.2
Throttle cable adjust bolt and locknut M6 × 0.75 1 4 0.4 2.9
Throttle cable (pull) M6 × 1.0 1 4 0.4 2.9
Throttle cable (return) M12 × 1.0 1 11 1.1 8.0
Throttle cable cover M5 × 0.8 2 4 0.4 2.9
Hot starter plunger M12 × 1.0 1 2 0.2 1.4
Hot starter cable adjust bolt and locknut M6 × 0.75 1 4 0.4 2.9
MAINTENANCE SPECIFICATIONS

SPEC
2 - 9 Sistema di lubrificazione:
Tipo di filtro olio Tipo di carta ----
Tipo di pompa dell’olio Tipo trocoidale ----
Gioco sull’estremità0,12 mm o inferiore
(0,0047 in o inferiore)0,20 mm
(0,008 in)
Gioco laterale 0,09 ~ 0,17 mm
(0,0035 ~ 0,0067 in)0,24 mm
(0,009 in)
Gioco tra alloggiamento e rotore 0,03 ~ 0,10 mm
(0,0012 ~ 0,0039 in)0,17 mm
(0,0067 in)
Raffreddamento:
Dimensioni del nucleo del radiatore
Larghezza 120,2 mm (4,7 in) ----
Altezza 240 mm (9,4 in) ----
Spessore 22 mm (0,9 in) ----
Pressione di apertura coperchio del radiatore 110 kPa (1,1 kg/cm
2, 15,6 psi) ----
Capacità radiatore 0,58 L (0,51 Imp qt, 0,61 US qt) ----
Pompa dell’acqua
Tipo Pompa centrifuga ad aspirazione
singola---- Elemento Standard Limite
SPECIFICHE DI MANUTENZIONE

SPEC
2 - 10 Elemento da serrare Filettatura QuantitàCoppia di serraggio
Nm m·kg ft·lb
Candela di accensione M10S × 1,0 1 13 1,3 9,4
Cappello dell’albero a camme M6 × 1,0 10 10 1,0 7,2
Vite del tappo cieco coperchio testata M12 × 1,0 1 28 2,8 20
Testata (prigioniero) M6 × 1,0 2 7 0,7 5,1
(prigioniero) M8 × 1,25 1 15 1,5 11
(bullone) M9 × 1,25 4 38 3,8 27
(dado) M6 × 1,0 2 10 1,0 7,2
Coperchio testata M6 × 1,0 2 10 1,0 7,2
Cilindro M6 × 1,0 1 10 1,0 7,2
Contrappeso equilibratore M6 × 1,0 2 10 1,0 7,2
Ingranaggio condotto dell’albero equilibratore M14 × 1,0 1 50 5,0 36
Guida catena di distribuzione (lato aspirazione) M6 × 1,0 2 10 1,0 7,2
Tenditore catena di distribuzione M6 × 1,0 2 10 1,0 7,2
Tappo filettato del tenditore catena di distribuzione M6 × 1,0 1 7 0,7 5,1
Rotore M8 × 1,25 1 14 1,4 10
Giunto flessibile del radiatore M6 × 1,0 10 2 0,2 1,4
Bullone di scarico refrigerante M6 × 1,0 1 10 1,0 7,2
Alloggiamento della pompa dell’acqua M6 × 1,0 4 10 1,0 7,2
Radiatore M6 × 1,0 6 10 1,0 7,2
Riparo radiatore M6 × 1,0 2 10 1,0 7,2
Tubo del radiatore M6 × 1,0 1 10 1,0 7,2
Coperchio pompa dell’olio M4 × 0,7 1 2 0,2 1,4
Pompa dell’olio M6 × 1,0 3 10 1,0 7,2
Tappo di scarico dell’elemento filtro olio M6 × 1,0 1 10 1,0 7,2
Coperchio elemento filtro olio M6 × 1,0 2 10 1,0 7,2
Filtro olio (carter) M6 × 1,0 2 10 1,0 7,2
Tubo di mandata olio 1 (M10) M10 × 1,25 1 20 2,0 14
(M8) M8 × 1,25 2 18 1,8 13
Flessibile olio M6 × 1,0 2 8 0,8 5,8
Giunto flessibile olio—120,21,4
Filtro olio (serbatoio olio) M6 × 1,0 1 9 0,9 6,5
Tappo di scarico serbatoio olio M8 × 1,25 1 18 1,8 13
Serbatoio olio (superiore) M6 × 1,0 1 7 0,7 5,1
Serbatoio olio e telaio M6 × 1,0 3 9 0,9 6,5
Morsetto giunto carburatore M4 × 0,7 2 3 0,3 2,2
Morsetto giunto del filtro dell’aria M6 × 1,0 1 3 0,3 2,2
Bullone di regolazione e controdado cavo acceleratore M6 × 0,75 1 4 0,4 2,9
Cavo acceleratore (tirato) M6 × 1,0 1 4 0,4 2,9
Cavo acceleratore (posizione iniziale) M12 × 1,0 1 11 1,1 8,0
Coperchio cavo acceleratore M5 × 0,8 2 4 0,4 2,9
Pistoncino starter a caldo M12 × 1,0 1 2 0,2 1,4
Bullone di regolazione e controdado cavo starter per
partenze a caldoM6 × 0,75 1 4 0,4 2,9
SPECIFICHE DI MANUTENZIONE

2 - 20
SPEC
KABELFÜHRUNGSDIA-
GRAMME
1Kraftstofftank-Belüftungsschlauch
2Kühlerschlauch 1
3Anschlussabdeckung
4Zylinderkopf-Entlüftungsschlauch
5Kühlerschlauch 4
6Kupplungszug
7Drosselklappensensor-Kabel
8Vergaser-Entlüftungsschlauch
9Obere Motorhalterung
0Warmstartzug
AKraftstoffschlauch
BVergaser-Überlaufschlauch
DIAGRAMME
D’ACHEMINEMENT DES
CABLES
1Durit de mise à l’air du réservoir de car-
burant
2Durit de radiateur 1
3Cache du connecteur
4Durit de mise à l’air de la culasse
5Durit de radiateur 4
6Câble d’embrayage
7Fil du capteur de position de papillon des
gaz
8Durit de mise à l’air du carburateur
9Support de moteur supérieur
0Câble de starter à chaud
ADurit de carburant
BDurit de trop-plein du carburateur
SCHEMA PERCORSO DEI
CAVI
1Flessibile di sfiato del serbatoio carbu-
rante
2Flessibile radiatore 1
3Copertura connettore
4Flessibile di sfiato testata
5Flessibile radiatore 4
6Cavo frizione
7Cavo sensore posizione farfalla
8Flessibile di sfiato carburatore
9Staffa superiore motore
0Cavo starter per partenze a caldo
AFlessibile del carburante
BFlessibile di traboccamento carburatore
DIAGRAMME D’ACHEMINEMENT DES CABLES
KABELFÜHRUNGSDIAGRAMME
SCHEMA PERCORSO DEI CAVI