2007 YAMAHA YBR125 wheel alignment

PERIODIC MAINTENANCE AND MINOR REPAIR
6-3
PREVENTIVE MAINTENANCE SCHEDULE
VA LV E S
SPARK PLUG
CARBURETOR
AIR FILTER
FUEL LINE
FUEL FILTER
ENGINE OIL
ENGINE OIL
FILTER SCREEN
BRAKE-FRONT &
REAR
Check valve clearances, adjust if necessary.
Check condition, gap;
Clean and reset if necessary.
Check idle speed, Choke lever operation.
Clean, inspect & lubricate. (replace if necessary)
Check fuel hose, for cracks or damage.
Replace if necessary.
Check for free flow of petrol, cleanliness of filter bowl,
replace if necessary.
Replace with recommended oil - Yamalube SG Grade
(Warm engine before draining)
Wash with petrol
Check operation./ Adjust if necessary.
Grease the brake cam.
ITEM OPERATION SNO
1
2
3
5 4
6
7
8
9
*
WHEELS 13FRONT & REAR
REAR ARM PIVOT CLUTCH
12 11BRAKE SHOES-
10
Check runout, spoke tightness, damage;
Correct it, if necessary. Check for wear, replace if necessary.
Check alignment marks on Push Lever and
Tighten with specified Torque if necessary Check Rear Arm assembly for looseness. Crankcase L.H. Adjust if necessary.
30 Days OR
500-700 KmAFTER EVERY DAYS OR KMS
REPLACE EVERY 10,000 km90 Days OR
2500-2700 Km180 Days OR
4500-5000 KmAFTER
EVERY
2000 KMS

PERIODIC MAINTENANCE AND MINOR REPAIR
6-4
PREVENTIVE MAINTENANCE SCHEDULE
EVERY 10,000 KM EVERY 10,000 KM
17
Check operation/oil leakage.
REAR SHOCK
ABSORBER
Replace if necessary.
STEERING BEARING
FRONT FORKS 16 15
Check operation/oil leakage. Repair if necessary. Check Bearing assembly for looseness;
Correct if necessary.
Relace oil Repack grease
S.NO ITEMOPERATION
DRIVE CHAIN
NUTS, BOLTS AND
FASTENERS
CENTERSTAND AND
SIDE STAND
Check Chain slack, alignment. Adjust if necessary.
Clean periodically & lubricate.
Check all Chassis fittings and fasteners for looseness.
Tighten as per specification.
Check operation and lubricate if necessary.
Check electrolyte level and top it up if necessary.
Check specific gravity and charge if required.
Check breather pipe for blockage and routing.
CONTROL CABLES
-THROTTLE
-CLUTCH
-FRONT BRAKE 18
19
20
21
BATTERY
22
Readjust or replace as required. Check operation, free play, cable damage
EVERY MONTH
IT IS RECOMMENDED THAT THE ABOVE BE SERVICED BY AUTHORIZED DEALER.
SERVICE MORE FREQUENTLY WHEN THE VEHICLE IS DRIVEN IN DUSTY AREAS.YAMAHA*
EVERY 10,000 KMS
WHEEL BEARING 14
Check Bearing assembly for looseness, damage;
Replace if necessary.
Repack grease
30 Days OR
500-700 KmAFTER EVERY DAYS OR KMS
90 Days OR
2500-2700 Km180 Days OR
4500-5000 KmAFTER
EVERY
2000 KMS

1. Chain jointIf the chain is disassembled, be sure
the chain lock is placed in the
correct direction when installing.
1. Adjusting nut
2. Cotter pin
3. Axle nutDrive chain slack adjust-
ment1. Loosen the rear brake pedal
free play adjusting nut.
2. Remove the cotter pin from
the axle nut.
3. Loosen the axle nut.
1. Locknut
2. Adjusting hex screw4. Loosen the chain adjusting
locknuts on each chain puller. To
tighten the chain, turn the chain
adjusting hex screw in direction b
to loosen the chain, turn the chain
adjusting hex screw in direction a
and push the wheel forward. Turn
each chain adjusting hex screw
exactly the same amount to
maintain correct axle alignment.
There are marks on each chain
puller. Use these marks to align
the rear wheel.
PERIODIC MAINTENANCE AND MINOR REPAIR
6-19