Page 65 of 97
6-18
6-18For brake pedal adjustment, be sure to proceed as
follows (it is advisable to have a Yamaha dealer make
this adjustment.)
1. Pedal height.
a. Loosen the locknut.
b. By turning the adjuster clockwise or counterclockwise
adjust the brake pedal position so that its top end is
approximatelly 2 mm (0.08 in) below the footrest top
end.
c. Tighten the locknut.
Rear brake adjustment
1. Adjusting nut 2. locknut
a. Pedal height: 2 mm( 0.08 in)
WARNING:
For brake pedal adjustment, be sure to proceed as
follows (it is advisable to have a Yamaha dealer make
this adjustment.)
1. Pedal height.
a. Loosen the locknut.
b. By turning the adjuster clockwise or counterclockwise adjust the brake pedal position so that its top end is
approximatelly 2 mm (0.08 in) below the footrest top
end.
c. Tighten the locknut.
Rear brake adjustment
1. Adjusting nut 2. locknut
a. Pedal height: 2 mm( 0.08 in)
WARNING:
Page 66 of 97

6-19
6-19
ADVERTENCIA
After adjusting the pedal height adjust brake pedal free
play.
2. Freeplay. The rear brake pedal free play should be adjusted to
20 ~ 30 mm (0.8 ~ 1.2 in) at the brake pedal end. Turn
the adjuster on the brake rod clockwise to reduce play
or counterclockwise to increase play.
ADVERTENCIA
Brake pedal free play should be checked whenever the
chain is adjusted or the rear wheel is removed and then
reinstalled.
If it is impossible to make proper adjustment, consult
a Yamaha dealer.
Check the operation of the brake light after adjusting
the rear brake.
1. Adjuster
a.Free play: 20 ~ 30 mm ( 0.8 ~ 1.2 in)
WARNING:
WARNING:
ADVERTENCIA
After adjusting the pedal height adjust brake pedal free
play.
2. Freeplay. The rear brake pedal free play should be adjusted to
20 ~ 30 mm (0.8 ~ 1.2 in) at the brake pedal end. Turn
the adjuster on the brake rod clockwise to reduce play
or counterclockwise to increase play.
ADVERTENCIA
Brake pedal free play should be checked whenever the
chain is adjusted or the rear wheel is removed and then
reinstalled.
If it is impossible to make proper adjustment, consult
a Yamaha dealer.
Check the operation of the brake light after adjusting
the rear brake.
1. Adjuster
a.Free play: 20 ~ 30 mm ( 0.8 ~ 1.2 in)
WARNING:
WARNING:
Page 92 of 97

8-1
8-1
SPECIFICATIONS
MODEL
Dimension:
Overall length
Overall width
Overall height
Seat height
Wheet base
Minimum ground clearance
Basic weight:
With oil and without fuel:
Minimum turning radius:
Engine:
Type
Cylinder arrangement
Displacement
Bore x Stroke
Compression rate
Starting system
Lubrification system
103 Kg (227 lb)
113 Kg (249 lb) 2.090 mm (82.3 in)
810 mm (31.9 in)
1.125 mm (44.3 in)
840 mm (33.1 in)
1.340 mm (52.7 in)
265 mm (10.4 in)
2.100 mm (82.7 in)
XTZ 125K
Air cooled, 4-stroke
gasoline, SOHC
Single cylinder
123.7 cm
3
54 x 54 mm (2.13 x 2.13 in)
10.0 : 1
Kick starter
Wet sump
104 Kg (229 lb)
114 Kg (251 lb) 2.090 mm (82.3 in)
810 mm (31.9 in)
1.125 mm (44.3 in)
840 mm (33.1 in)
1.340 mm (52.7 in)
265 mm (10.4 in)
2.100 mm (82.7 in)
XTZ 125E
Air cooled, 4-stroke
gasoline, SOHC
Single cylinder
123.7 cm
3
54 x 54 mm (2.13 x 2.13 in)
10.0 : 1
Electric starter
Wet sump
SPECIFICATIONS
MODEL
Dimension:
Overall length
Overall width
Overall height
Seat height
Wheet base
Minimum ground clearance
Basic weight:
With oil and without fuel:
Minimum turning radius:
Engine:
Type
Cylinder arrangement
Displacement
Bore x Stroke
Compression rate
Starting system
Lubrification system
103 Kg (227 lb)
113 Kg (249 lb) 2.090 mm (82.3 in)
810 mm (31.9 in)
1.125 mm (44.3 in)
840 mm (33.1 in)
1.340 mm (52.7 in)
265 mm (10.4 in)
2.100 mm (82.7 in)
XTZ 125K
Air cooled, 4-stroke
gasoline, SOHC
Single cylinder
123.7 cm
3
54 x 54 mm (2.13 x 2.13 in)
10.0 : 1
Kick starter
Wet sump
104 Kg (229 lb)
114 Kg (251 lb) 2.090 mm (82.3 in)
810 mm (31.9 in)
1.125 mm (44.3 in)
840 mm (33.1 in)
1.340 mm (52.7 in)
265 mm (10.4 in)
2.100 mm (82.7 in)
XTZ 125E
Air cooled, 4-stroke
gasoline, SOHC
Single cylinder
123.7 cm
3
54 x 54 mm (2.13 x 2.13 in)
10.0 : 1
Electric starter
Wet sump