2007 YAMAHA WR 250F battery

[x] Cancel search: battery

Page 52 of 912

YAMAHA WR 250F 2007  Notices Demploi (in French) 1 - 27
GEN
INFO
EC150000
CONTROL FUNCTIONS
MAIN SWITCH
Functions of the respective switch
positions are as follows:
ON:
The engine can be started only at
this position.
OFF:
All electrical circuits ar

Page 78 of 912

YAMAHA WR 250F 2007  Notices Demploi (in French) 1 - 53
GEN
INFO
1. Inspect the coolant level.
2. Turn the fuel cock to “ON”.
3. Push on the main switch to “ON”.
4. Shift the transmission into neu-
tral.
5. Fully open the cold starter knob
1

Page 96 of 912

YAMAHA WR 250F 2007  Notices Demploi (in French) GENERAL SPECIFICATIONS
2 - 3
SPEC
Brake:
Front brake type Single disc brake
Operation Right hand operation
Rear brake type Single disc brake
Operation Right foot operation
Suspension:
Front suspension

Page 194 of 912

YAMAHA WR 250F 2007  Notices Demploi (in French) 2 - 101
SPECCABLE ROUTING DIAGRAM
EC240000
CABLE ROUTING DIAGRAM
1Fuel tank breather hose
2Clamp
3Diode
4Hot starter cable
5Wire harness
6Hump (frame)
7Cylinder head breather hose
8Throttle position s

Page 196 of 912

YAMAHA WR 250F 2007  Notices Demploi (in French) 2 - 103
SPECCABLE ROUTING DIAGRAM
ÈInsert the end of the fuel tank breather hose into the hole in the
steering stem.
ÉFasten the throttle cable, hot starter cable and rectifier/regula-
tor lead onto

Page 198 of 912

YAMAHA WR 250F 2007  Notices Demploi (in French) 2 - 105
SPECCABLE ROUTING DIAGRAM
ÐPass the clutch cable through the cable guide.
ÑFasten the starter motor lead, AC magneto lead and neutral
switch lead onto the frame. Locate the clamp end facing

Page 204 of 912

YAMAHA WR 250F 2007  Notices Demploi (in French) SPEC
2 - 111
CABLE ROUTING DIAGRAM
1Clamp
2Positive battery lead
3Battery
4Negative battery lead
5Taillight coupler
6CDI unit coupler (6-pin)
7CDI unit coupler (3-pin)
8CDI unit coupler (6-pin)ÈFaste

Page 206 of 912

YAMAHA WR 250F 2007  Notices Demploi (in French) SPEC
2 - 113
CABLE ROUTING DIAGRAM
ÍFasten the catch tank breather hose
and catch tank hose to the rear frame.
Clamp them close to where they are
joined to the frame. Fasten the pipe
tightly enough n
Page:   1-8 9-16 17-24 25-32 32 next >