2007 SKODA ROOMSTER CD player

Radio2
Radio
Radio - Overview
Rotary/push knob
− switching on and off (pressing)
− Volume control (rotate)
− other function settings in various menus
Button
− Activation of CD mode (CD-DA/CD-R/CD-RW/MP3, multisession)
− Direct selection of the CD via station keys
− Activation of the mode for external audio source
Button to activate the FM radio mode
Button to store the six stations with the strongest reception in the respec- tive waveband
Button
− fast search in the respective waveband
− Scroll through the contents of the CD
Buttons
− manual station finding in radio mode
− Selecting title in CD mode
Buttons
− fast station finding in radio mode
− Pre-winding the title in the CD mode
Button for adjusting the sound and volume distribution
Button to activate the AM radio mode
Button
− Display of radio text information
− Display of additional information of MP3-CDs
Button to call up the menu settings of the parameter for radio or CD player
Station keys
− store and select the RDS station
− CD selection
− Selecting the parameter for user settings
CD - eject button
CD-case
Display - screen
Button for activating the traffic information mode
Important information
Warranty
The same warranty terms apply for the equipment as for new vehicles.
After the expiration of the warranty, a unit in need of repair will be replaced inex- pensively with a reconditioned, original unit with spare part warranty. However it is required that there is no housing dama ge and no unauthorised repair attempts have been made.
Note
A damage in the sense of the warranty must not be the result from improper handling of the system or from unprofes sional repair attempts. In addition, no external damage must be present.
Radio mode
The radio should only be used, if the traffic situation permits it.
The volume settings must be selected in su ch a way that acoustic signals from the outside, such as e.g. a Martins horn from utility vehicles (police cars, ambulances and fire brigade), can be heard at any time.
A1
A2CD
A12
A3FM
A4AS
A5SCAN
A6
A7
A8
A9AM
A10INFO
A11MENU
A12
A13
A14
A15
A16TP
s1uk.3.book Page 2 Wednesday, May 2, 2007 11:07 AM

The CD changer9
The CD changer
Using the system
Inserting the CD
Your radio is fitted with a player, which enables the play function of CD-
DA/CD-R/RW/MP3, multisession.
– Press the button . If no CD is inserted, NO CD appears in the
display. If a CD has already been inserted, the play function begins at
the point where the last play function was interrupted.
The display shows the following content:
current title number;
Information for playing time;
Assignment of the station keys ;
Display of the active REPEAT mode;
Display of the active MIX mode.
Operating the CD player
Select track
– Press the button or during the play function of the CD, in order
to select the previous and/or the next title.
– Press the button or for the fast finding, the reverse or forward
search starts after releasing the button.
Function SCAN
– Press the button , in order to scroll through the CD. The first 10
seconds of each title are played. At the same time the title number is
displayed in the display.
– In order to call up the automatic st ation finding, press the station key
OK. The found title is replayed.
End the play function of the CD
– Press the button or in order to end the play function of the
CD.
Note
If the ejected CD is not removed, it is drawn in again for safety reasons.
Fig. 2 CD mode
CD
AA
AB
ACA12
AD
AE


SCAN
A12
FMAM
s1uk.3.book Page 9 Wednesday, May 2, 2007 11:07 AM

The CD changer11
Information on how to use a CD
CD to jump
Uneven road surfaces and strong vibrations may cause the CD to jump.
Formation of condensation
When it is cold and after rain showers, moisture can deposit in the CD drive (condensation). This can effect the CD ju mp or impair the play function. In such cases wait until the moisture has dissipated.
Notes for the care of the CDs
If a CD is soiled, please never clean the CD in the direction of a circle but rather with a soft fluffly cloth from inside to outside. In case of severe layers of dirt we recom- mend to clean the CD with a commercially available CD cleaner. Also in this case do not clean the CD in the direction of a circ le but rather from inside to outside and then let it dry off.
Caution
•Never use liquids such as gasoline, paint thinner or disk cleaner, otherwise the surface of the CD could get damaged.
•Never expose CDs to direct sun rays!
•Please never write or affix the CD!
Note
Dirt or damage of a CD can lead to diffic ulties when “reading” the information. The difficulty in reading the error depends on th e dirt or on the severity of the mechan- ical damage. Severe scratches cause reading errors which can make the CD jump or “get stuck”. All CDs must be treated carefu lly and always be stored in a protective case.
External CD changer
Using the system
Your radio can be equipped with an original CD changer which can be
installed in your vehicle.
– In the mode of the integrated CD player, press the button , so that
the play function of the external CD changer is activated. If no external
CD changer is connected, NO CDC appears in the display.
– Select a CD with a station key . NO CD is displayed for not assigned
positions.
The display shows the following content:
current title number;
Information for playing time;
Assi gnme nt of the s tation key s to the CDs , se lect the rele vant CD by pre ss ing;
Display of the currently replayed CD;
Display of the active MIX mode.
Fig. 4 Mode of the external CD changer
CD
A12
AA
AB
ACA12
AD
AE
s1uk.3.book Page 11 Wednesday, May 2, 2007 11:07 AM

The CD changer12
Selective functions of the external CD changer
– Press the button during the CD play function.
The display shows the following functions:
MIX
Set the desired parameter by pressing the station key .
•OFF - Play function in continuous order;
•TRACK - Play function of titles in random order in a certain folder.
Note
You can call up the second level for radio settings ⇒page 5 by pressing the station key .
External sources
Your radio enables the connection of au dio units from a wide range, e.g.
portable player.
Activating an external audio source
– By repetitively pressing the button activate the external input,
AUX IN... is displayed. The play function starts automatically after
connecting the external source.
– If you wish to set the input sensitivity depending on the signal output
level of the external source, press the station key .
End play function of the external source
– Press button or . It starts the play function of the last selected
radio station.
– Press the button , in order to start the play function of the CD.
Setting of the input sensitivity
•AUX LEV 1 - high level, used in particular for notebooks;
•AUX LEV 2 - middle level, used for cassettes or CD player;
•AUX LEV 3 - low level, used for MP3 player;
Note
•Your radio has no control over the level setting of the external source. Make sure that the highest quality is achieved by a suitable combination of input sensitivity and output sensitivity of the external sour ce (volume control). You will find detailed information for this setting in the operating instructions of the units.
Technical short description
Power output
4x20 W at 14.4 V; 25°C; 10% THD (Total Harmonic Distation)
4x35 W peak power
Digital audio processor with Equa lizer according to vehicle model.
Display
Positive FSTN (Film Super Twisted Nematic)
Graphic 200x47 active points
MENU
A12
A12
CD
A12
FMAM
CD
s1uk.3.book Page 12 Wednesday, May 2, 2007 11:07 AM