Quick Reference Guide3
selected. A column will indicate the volume level. The
volume of a telephone conversation can also be regulated
using the volume control.
Entries in the screen menus can be made using the menu
button. Turn to mark a function or a sub-menu. Press to
select a function or a sub-menu.
Sound and sound centre settings . . . . . . . . . . . . . . . . . .
Left and right of the screen - 5 function/station keys.
The term function key is used because the keys have
different functions depending on the menu being shown in
the display. If the text says, for example, “Press
”, then press the function key next to where
the text “Dest. on map” appears on the screen.
Station keys: The upper 6 function keys are used as
station buttons in the radio mode. Stations can be stored
on these keys. The upper 6 function keys can be used to
select the inserted CDs in CD changer mode.
Backwards/forwards keys, apply to the active audio
source
press briefly: radio mode: station change in the memory;
CD mode: changes track
press longer: radio mode: station change in the station
listing; CD mode: fast forward/backward search
Switches between day and night display or darkens the
screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Slot for an audio or navigation CD. . . . . . . . . . . . . . . . . . . .
CD eject button. The ejected CD will be pulled back into
the unit if it is not fully withdrawn within 10 seconds.
Set flagged destination. The unit will store the current
vehicle position when this button is pressed. When this
button is pressed again, the flagged destination will be over-
written if it has not been stored in the destination memory. . The traffic jam button calls up the input menu to exclude
route sections in a route list or to enter traffic jam information
manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Back to previous menu. Map display when Navigation CD is inserted / Switch
to symbol display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calls up the Navigation main menu. . . . . . . . . . . . .
Switches to other auxiliary audio or video units. . . . . reserved for additional functions at a later date
CD and CD changer control
1)
. . . . . . . . . . . . . . . . . .
Radio menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call up system settings, traffic reports, position
displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WARNING
Adjust the volume so that you can still hear signals coming from
outside the vehicle, such as fire brigade, ambulances or police
cars.
Caution
The screen is not a touch screen. Do not press on the surface. The screen
can be cleaned with a soft cloth (and alcohol, if necessary). Do not use
solvents such as turpentine or petrol to clean the surface as they will
corrode the material.
A2A3
Š
12
A4
Dest. on map
A5
ƒ
„
A6
r
42
A7
10
A8
³
A9
®
17, 23
1)You will find a description in the corresponding Owner´s Manual.A10
30
A11
ESC
A12
MAP
39
A13
NAVI
16
A14
AUX
44
A15
TELE
A16
CD
10
A17
RADIO
6
A18
INFO
41
sao.book Seite 3 Montag, 22. M‰ rz 2004 9:32 09
Radio/CD/Sound7
Autostore for all memory levels (Initial Autostore)
– Press for longer than 10 seconds to allocate those stations with the strongest reception in all wavebands to the
upper 6 function keys.
The selected function will be shown on the screen and can be stopped by
pressing again.
A scan in the FM waveband will play through the list of registered stations.
A scan in AM will play all stations with a high quality reception. Each
station scan lasts 8 seconds. Press the menu knob or if you
would like to stop at the station currently being played.
Note
Use the function “Initial Autostore” if you are using the unit for the first time
or when selecting new stations in the waveband. Any station names on the
station keys will be overwritten. The process of searching for and storing
the station names takes a few seconds.
Setting waveband/Muting– Press in the radio main menu Ÿpage 6, fig. 4 to see
the frequencies.
– Press or to receive VHF stations.
– Press or to receive medium wave stations.
– When in FM1 or FM2 mode, press to receive traffic infor- mation reports.
– Press / to mute the radio or to switch the mute function off/on.The last heard station will be played for the waveband selected. Traffic
information reports will be relayed even when the radio has been muted.
The TP function must be active for this purpose (white column next to the
field). When TP is active, the letters TP are lit up in orange. The increased
Scan / _ASScan / _AS
Scan / _AS
Bra-0031
back with ESCRadio off
Dest. entry active
Band
Fig. 6 Radio waveband
BandFM1
FM2
AM1
AM2
TP
Radio off
Radio on
sao.book Seite 7 Montag, 22. M‰ rz 2004 9:32 09
